GRBL Settings for CNC: A Beginner's Guide | GSender and More
Vložit
- čas přidán 12. 06. 2022
- Unlock the full potential of your CNC machine with this comprehensive guide to lesser-known GRBL settings! We delve into settings like $$, $3, $23, $13, $20, $21, $22, $24, $25, and $27 using GSender as our control software. Follow along as we navigate the GRBL firmware, using the console for a universal approach that benefits all users, regardless of their control software.
🛠️ What's Covered:
1. Introduction to GRBL firmware and its role in CNC operations.
2. Step-by-step guide to changing key GRBL settings using GSender's console.
3. Detailed explanations of specific settings that impact axis direction, homing direction, measurement systems, and limits.
🔍 Key Moments:
0:40 - Explaining what GRBL is and its importance.
1:15 - How to save your current settings before making changes.
1:50 - Using GSender to modify GRBL settings.
4:44, 15:46, 16:28, 18:40 - Deep dives into settings like $3, $13, $20, $21, $22, $24, $25, and $27.
🔗 Useful Links:
GSender Download:
sienci.com/gsender/?ref=dehammer
GRBL Official Website:
www.grbl.org/
GRBL GitHub Download:
github.com/grbl/grbl
GRBL Settings Pocket Guide:
www.diymachining.com/download...
The below link is are affiliate links that help support the channel and add nothing to your overall cost:
New MK2 Long Mill:
sienci.com/product/longmill-m...
🎵 Music by Hawk vs Dove:
hawkvsdove.bandcamp.com/music
💡 Why Watch?
Whether you're a CNC novice or looking to refine your machine's performance, this video offers clear, actionable insights into adjusting GRBL settings for optimal operation.
💖 Support the Channel: Your likes, comments, and subscriptions help me create more content
about CNC, GRBL, and more. Share your thoughts or questions in the comments! - Jak na to + styl
Just setting up a CNC and this was great for explaining a few things that are helping me procrastinate! Thanks!
Your Welcome and glad it helped you out!
Very interesting concept to flip the motor direction to intentionally flip the g-code for particular use-cases. Great video work and thanks for sharing!
Thank You, yeah as I could not automate flipping the image in my work flow, just made the machine do it for me.
It is a good hack, but you need to remember that all your climb cuts become conventional cuts and vice versa, if you invert one of the axes!
Sir my machine show's error 3 invailte statement and one other that's shows grbl (1.1h) for help.. Sir please help me my machine is not going to joging
So, wondering if you might be able to help me. Just got a CNC laser engraver hand-me-down from a friend who never got it running. It has a GRBL 0.9 J+ controller that seems to be flashed with 1.1. Anyway, the Y axis will only move in one direction and for the life of me I cant figure it out
Thanks dear sir💕💕💕 thanks
Sir i have a question thats all of port connected but I can't joging and running. There are showing probe fail. Another u r open a new chat that's dollar 3 setting. ods-open office.. I can't understand the formula. How can understand.. I'm new and helpless.. Please
$3 changes the axis direction
$20 is soft limits
$21 is hard limits
$22 is homing cycle
Try dialing 20,21,22 and see if you get the error.
I don't know if I missed it, if you talked about it. But why do we get negative numbers after homeing? The small numbers, the machin "absolut" measurement from home position, or something.
And is it possible to get the home position to be 0,0,0?
I always felt they should have pronounced it Gerbil