This unique wooden book is a keepsake box
Vložit
- čas přidán 11. 08. 2023
- Plans ►shopwwmm.com/products/wooden-...
Set up shop for less than $1000. Download my FREE GUIDE ► mytoollist.com
Sign up for my free monthly newsletter ► notesfromsteve.com/
Creative Culture Podcast ► www.creativeculturepod.com/
Here's the magnets I used for the latch: amzn.to/47vGuSO
PATREON ►► / wwmm
TOOLS I USE► amzn.to/3OQR5ka
FACEBOOK► / woodworkingformeremortals
INSTAGRAM► / steveramsey_wwmm
MAILING ADDRESS:
WWMM
448 Ignacio Blvd. # 237
Novato CA 94949
----------------
Woodworking for Mere Mortals® is a registered trademark of ZRAM Media, LLC.
#woodworking
Hey there, in this CZcams video, I'm going to show you how to make an awesome scrap wood project - a book-shaped box. The cool thing is, you don't need to buy any new lumber for this; just use some hardwood you have lying around. I recommend using hardwood over softwood; for this project, I'm using a nice piece of cherry.
First off, I start by working on the spine. I use my crosscut sled to remove the middle part of the spine. Setting the blade to 3/8 inch height, I make the cut, setting up a stop block for accuracy. A crosscut sled is awesome for this, making the small piece safer to handle.
Now, I want the outer part of the spine to have a curve, so I mark where I want that curve to end up and use a random orbit sander to shape it. Just a bit of material to remove, and it's done.
Moving on, I need to cut notches in the book covers to fit into the spine. With my crosscut sled again, I make those cuts, ensuring I have proper support.
To thin down the covers, I'm going to re-saw a board. A bandsaw is ideal for this, but I use my table saw with careful setup to do the job. Safety is a priority; I use a variety of tools like push sticks, a feather board, and a special fence for stability.
Now, the exciting part: gluing the spine and covers together. I make sure to align everything perfectly. The hinge is a bit tricky, and I use dowel pins for a smooth open-close action.
Finishing touches include chamfering edges, rounding corners, and applying lacquer. I line the interior with felt and fine-tune the hinge. And voila, there you have it - a beautiful book-shaped box, all made from scrap wood!
So, that's the rundown of how I created this awesome project. Remember, it's all about using what you have and getting creative with the tools you've got. Stay safe and enjoy your woodworking journey! - Jak na to + styl
![[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny](http://i.ytimg.com/vi/3G9MH063Cx4/mqdefault.jpg)
This guy was apart of the Golden age of CZcams
He’s definitely one of the top educators on CZcams.
Amen
Agreed. I love his old videos as well.
Is the golden age over?
Those were the days. Not that influencer crap we see today
I watched this channel when I begun woodworking, years later, I still come back to it cause it's so good and simple.
I remember when the plan for this project was free
Great content for us mere mortals!
10 years ago I was a senior in high school and I saw your original version of this video. I spent a week in the wood shop during my lunch period making one of these out of some scrap cherry that I got from a local furniture fabricator. It was a gift for my partner at the time and they adored it.
I’ve just started renovating the apartment I purchased and so many of the skills I’ve developed over the years are from your videos. Thanks for everything and for putting out great content for us mere mortals!
It is so refreshing to watch your videos. None of the usual CZcams mumbo jumbo just quality content. Explained well and no fluff. You really are a CZcamsr of the early days and I love it. Thanks for all you continue to contribute to the woodworking community!
One additional detail that I think would enhance this project would be to score multiple shallow grooves on the "pages"
I was thinking that too. But those grains kind of look like pages already
Simpler, laminate some plywood and then cut the "pages" from them. Instant pages. High ply count quality plywood helps a lot with this.
@@ronaldknapper4366 Good idea! Baltic birch would be a good option for this
GREAT to see a BUILD video!! Not only from 1 of the best but in general. Tired of tips & tricks, 10 new wood working tools, reviews, infomercials, ect.
Woodworking build videos are MUCH, MUCH needed nowadays!
Wonderful video, thank you. It was super refreshing seeing the accidents and corrections along the way too! Dropping a glued bit onto a work piece is the kind of thing that can really bring down the mood. It's nice to see a pro encounter the same kinds of stuff.
Thank you for watching! Plans for this project are available here: Plans ►shopwwmm.com/products/wooden-book-keepsake-box
I made this project about 5 years ago for my wife after watching your earlier video. It was a fun challenge that turned out really nice. Thanks for the years of entertainment and teaching Steve. You are one of my favorite CZcamsrs, I always look forward to your project videos
This is a fantastic idea and would make a great gift. Thanks for the video. I miss woodworking and can't wait until it gets cool enough that I can stand working in my un-air conditioned shop again.
Steve - bravo for explaining how you thought out each and every cut you were planning. The possible problems and showing your solutions! That's why you were one of the very first "makers" I subscribed to, and try to never miss. Thanks!
Nice project and a good gift idea.. I think I'll make one. I like how you explained some of the elementary steps, like setting up the Gripper. Those are the things that often get skipped.
Excellent! Best project you've done! I'm going to steal your idea to build gift boxes for when I buy my wife her hard cover books. Thanks!
Thank you!
This is exactly what I’ve been looking for. I’ve been toying with ideas for a keepsake box for each of my twin nieces. They both love to read, so perfect idea. Thanks!
Absolutely loved this!!
Is there anything more beautiful than cherry? No. Amazing piece.
Not sure how many years ago it was, but I think this was the first video I ever saw you do. And, I made some of those book boxes. Cool project.
Thank you so much for this. This is the most perfect possible idea for the box I've been planning to make my daughter. I'll be using walnut and maple.
thank you sir! God bless you and yours
Great project! Love the details and hands-on explanations of how things like your Grripper and crosscut sled work. Haven't seen a video with as much detail in a long time. Thanks for going "Old school" lol
FYI. So if you screw up the dowel holes in book cover . And perhaps the binding breaks or your 1/8 th drill hole ends up blowing thru top cover… never fear … shove the dowel in there with some glue and call it a day..come back and redrill
All good .. the binding hole broke for me too( probably cause I used pine ) but I just glued a new piece on that one end and started it over without having to make the whole piece again. These are the fixes you learn while taking Steve’s courses . It’s not rocket science. Stay calm and just use your intuition. You got this!!
It's never SCRAP, when Steve makes it
It's always scrap when I make it 😁
😂
Thanks Steve!
Great project, Steve! I would recommend recessing the magnets below the surface slightly. You will lose a small amount of magnet force, but you can compensate by increasing the magnet diameter or thickness. Neodymium magnets are very brittle and if you slam them together enough times, they will eventually crack. Ask me how I know 🙄
Nice to see a project video! The podcasts are fun, but I also love it when we get to see your own expression as a woodworker!
I hope you know I've posted project videos almost exclusively for the past year. CZcams doesn't show everything I post. BTW, my podcast is on Spotify or Apple Podcasts!
What? I’m a subscriber for years and I haven’t seen project videos for the past year. Now I’ll go look for them. So happy that the old Steve videos are back. Semi-simple projects that I can actually make. Like thos in the Weekend woodworker course, which got me into the hobby. Highly recommended. Have several of the projects around the house.
Nice job. Very clear tutorial
The light hinge pins add a really nice touch. Nice project Steve, thanks for sharing!
I've been a subscriber for years and this video was something else, loved to see the planning of each cut, the details!
Stev, my fav part of the video was the blue tape on the fence clamps. You savage.
Your projects & videos are awesome, but maybe more so is your calm demeanor. I'll have to remind myself of your voice when I hit those frustrating moments in the shop. Thanks and keep up the great content!!
Hey Mr Steve! This was one of my first projects that I made using your guide a few years ago. I really appreciate you making an updated version addressing a lot of quirks that we may face that we may face while making it; truly wish I was aware of them back them! But truly sir, thank you for being one of the inspirations that got me into this craft and still rekindling that fire years later.
Excellent as always😊 especially the tip on magnet orientation, be a bugger if glued in wrong way. Also enjoyed the magnet play interlude.
That's an awesome little project Steve. I think my Grandkids might like those. Thank you 👍! 😊😊😊
Awesome little project, Steve! Perfect gift for my daughter, she loves books!
Love this project - really miss your daily Covid project videos, so this is perfect! Most of your projects are right at my skill level so I really appreciate them as something attainable. Thank you!!
All these years I've been watching and enjoying your videos, this was another great one - really clear, informative and interesting to a mere mortal like me! thanks!
Great looking project. I built one following your directions many years ago. My grandson moved off to Florida with that one and of course, I can't find the plans for it. Now, I'll get to build another one. Thanks for the video. (BTW: I am in the middle of building the paper towel holder with the flower on the front. I love the oldies. We're two of a kind.)
Thanks for the video.
This was great, not just as a project, but as an idea and a video. Thanks for all you do
Steve, I love these creative ways to use make a nice "box". Thank you for the inspiration!!
Ah yes, I recall when you _used_ to have a bandsaw... and what happened to it. I liked the tips how to resaw on the table saw safely... And I got my grippers for my shop because of your ads for them! That was pure gold. I hope you will do a Halloween special this year, it is a passion for me as well
GREAT project Steve. I will make two of them, one for each of my kids. Thanks! !! !!!
Love all your content Steve. Especially love to see one of these “Old Skool” woodworking vids to show up.
Awesome Steve. Thank you
I absolutely adore this project!!!
As always a great little project Steve.
Delightful design and excellent demo, as usual. Thank you!🇨🇦
Another superb video. Lots of techniques crammed into a simple and elegant project. Keep up the great work.
Great project that doesn't need a lot of expensive wood or machinery.
Just one recommendation - add a strip of elastic material across the inside so that any contents don't fall out if the 'book' is placed vertically on a shelf.
The elusive aluminum sacrificial fence. A nice touch. 👍
Love love love seeing the project videos again!
5:44 "heyyy what was that doing in there" 🤣💕👍
PS- came out great/beautiful Steve
That was amazing. I’m so impressed.
Love this Project! I'm going to have to make some!
A wonderful project, this would be great for learning miter joints and the subtle art of fine tuning with sanding. A very clean and good looking project
Awesome looking book. Great work.
Cool project. Like the contrast between the woods
Amazing work! Another awesome project!
Nice! Adding this one to my to-do list of projects.
Looks great. 👍👍
And BAM! Christmas presents are solved. Thanks Steve
Nice build. I suggest to have the magnets hidden for aesthetics but also to prevent the magnegs from crushing against each other. Those are strong and brittle
Lovely project! Thank you for the video!
What à great Teacher! ❤
Thank You Steve!
Steve mentioned that you could get a ripping blade for your tablesaw. Do it! I was amazed at the improvement with my old underpowered saw. The ripping seems to work fine for crosscuts, too. I would never dream of using a general purpose blade unless you have a big motor.
sacrificial cleat, 😆, I've never heard that before. thank you sir
Looks great.
Nice job. I'm going to use this process for making a Koa jewelry box. Thanks.
super cool! This would make for a great gift
I'm going to be making this for a friend's wedding gift, i think! Thanks for the inspiring video!
Very nice! Thank you for sharing!
Great Project Steve
Good stuff Steve, thanks for making a project video!
Very cool. I think I am going to try this project as a good “hiding spot” for my firearm. Maybe make it a bit larger to accommodate it.
Great video. I love your projects even tho the algorithm does not. "I'll apply some past wax so the dowels will hinge better" sounds like Ken's challenge in Barbie, "I challenge you to beach". Interesting how a noun can become a verb.
Love the rusty side cutters, just like mine !
19:35 home made dowel center! Nice.
Ah, a memory box. Nice. I made one of these years ago for my wife out of redwood. I also made a small table that it sits on in the living room.
Very nice project! I may have to give it a shot!
Gorgeous ❤❤
Very very nice!
You just gave me Christmas ideas! Thank you as always for the build video!
I really love this!
Amazing work, Steve! Really beautiful box!!! 😃
Stay safe there with your family! 🖖😊
I trally like your hinges. Will try this on one of my next boxes.
Looks nice.
Take a thick book , hollow its pages out with exacto knife and glue them together and it's a good safety box
Wow what a cool project, i’m going to try and make this for my daughter !
My son will probably want one too! Haha
i really like your process and design. I've made three boxes to hold my dad's three WWII medals i pretty much followed your process with just a few exceptions. for drilling the holes i measured, marked and then used my drill press to drill the holes just through the spine. Then i used that hole to guide the drill bit into the keepsake cover after the inside piece was already glued in. that way i got the holes in exactly the right place for the cover. when i tried your way of siting the straightness of my drill, i found i was not very good at it... :). i happened to have some cherry logs from a tree on our property that fell years ago. was a fun time debarking, leveling and cutting to size. Inside the box a cut out a cardboard piece to fit the inside, covered it with felt, then attached the medals. Used poplar for the inside body. Also, two of the three boxes i stained my cherry with cherry stain and then shellaced and waxed them. the other one i tried some rubio monocoat cherry color, and while it looks ok, i like the stained ones better. thanks again!!! would love to show you the results.
Very nice!
"That's all there is to resawing wide boards."
"Hey, look, it's lunchtime!"
Love the project videos, Steve
Thanks good project
I once used some of those little magnets on a project. I had some harbor freight, knockoff JB Weld. I found out really quick that there is metal dust in that stuff. The magnet pulled the epoxy from the bottom, where I inlayed it into wood. It completely covered the magnet regardless of what I did. I learned not to ever use JB Weld on magnets.
Another good video Steve, after all these years you are still producing good and interesting content.
Love it Steve..☺☺
Really cool!!!
That's pretty cool, might have to make one and see how it goes!
I think we just saw the creation of a Halloween 2023 prop!
That sacrificial cleat on the Grrriper is genius! I am so using that now. And a great project, Steve -- thanks for sharing. You are the best! 👍🏼