Hey Ted ,l like how you "Test out & Prove how things work in the real World". As usual, another precision built Attachment. Thank you Sir for the Excelent vidio and happy safe tractoring. Best wishes with all your endeavours.
Nice one. Didn't mention it but the brackets on the blade end look pretty sturdy in terms of bending the things sideways if you clip a tree while turning sharp, something like that. Another thing you could do is since the 'arms' are wide enough that the top link looking things fit entirely inside the brackets, is just make the bracket at the wheel end longer and put two different holes in it, basically an 'up' position and a 'down' position. That way you just stand at the wheel end, pull that pin, lift the arm until you line up with the other hole, and stick it back in. That would be a lot faster than cranking that thing up and down just to get to a 'storage' position. Another thing that might be handy is that the weight of the gauge wheels helps the blade cut whenever they aren't being used as wheels. Lots of smaller blades could use some weight added (although yalls stuff is beautifully heavy to begin with!!) this does that as a side effect. Keep it up!!
Just a friendly suggestion, if your guage wheels are in tandem , with a pivot between wheels when you come across an uneven section it will only raise or lower the blade half the distance each pass. Kinda like the road graders with tandem rear wheels. Nice quality blade, thanks for sharing good luck 👍.
I just got my scraper blade today and have been looking to find out what the extra tabs are for on the back of the blade. This explains everything. Thank you.
Ted, can you have a removable pin on the back end of that turnbuckle and then make two sets of brackets where that turnbuckle pins into. One for the down position and one further back that you can pin it in the up position. Just a thought.
Thank you for the demonstration! I have a similar plov but the wheels are attached more directly to the back side of the plov with holders of the same kind as the ones you would have on a trailer drag arm but with larger bearing wheels. What are the benefits of having a larger distance between wheels and plov?
We will be offering gauge wheels/brackets for our box blades soon. Concerning being able to interchange... I can’t say it will function properly at all though. The box blade gauge wheel tubes are 3” shorter and have a good bit of angle in them compared to the rake/ scrape blade tubes. You'll see the latest news and offerings in the EA Channel Group here: facebook.com/groups/EverythingAttachmentsLounge
Is this still available? I’m trying to order the EA XTreme Duty 6 way Tractor Scrape Blade but the gauge wheel option is only offered on the deluxe. The video looks like it’s a xtreme frame with a deluxe scrape blade.
Hey Ted ,l like how you "Test out & Prove how things work in the real World". As usual, another precision built Attachment. Thank you Sir for the Excelent vidio and happy safe tractoring. Best wishes with all your endeavours.
Thanks so much for the kind words and support. #StayTuned
Great idea! Great product!
Nice one. Didn't mention it but the brackets on the blade end look pretty sturdy in terms of bending the things sideways if you clip a tree while turning sharp, something like that.
Another thing you could do is since the 'arms' are wide enough that the top link looking things fit entirely inside the brackets, is just make the bracket at the wheel end longer and put two different holes in it, basically an 'up' position and a 'down' position. That way you just stand at the wheel end, pull that pin, lift the arm until you line up with the other hole, and stick it back in. That would be a lot faster than cranking that thing up and down just to get to a 'storage' position. Another thing that might be handy is that the weight of the gauge wheels helps the blade cut whenever they aren't being used as wheels. Lots of smaller blades could use some weight added (although yalls stuff is beautifully heavy to begin with!!) this does that as a side effect.
Keep it up!!
Just a friendly suggestion, if your guage wheels are in tandem , with a pivot between wheels when you come across an uneven section it will only raise or lower the blade half the distance each pass. Kinda like the road graders with tandem rear wheels. Nice quality blade, thanks for sharing good luck 👍.
With the wheels vertical on the blade would be extra weight for grading down pressure good idea
I just got my scraper blade today and have been looking to find out what the extra tabs are for on the back of the blade. This explains everything. Thank you.
Ted, can you have a removable pin on the back end of that turnbuckle and then make two sets of brackets where that turnbuckle pins into. One for the down position and one further back that you can pin it in the up position. Just a thought.
“We’ll be here for you.”
I think I'd like telescopic pin-type arms instead of turnbuckle style.
Not that much "absolute" precission.
Fabricator - "Who's going to be testing these?"......PR Guy - "Ted"......Fabricator - "Oh sh*%!"
Thank you for the demonstration! I have a similar plov but the wheels are attached more directly to the back side of the plov with holders of the same kind as the ones you would have on a trailer drag arm but with larger bearing wheels. What are the benefits of having a larger distance between wheels and plov?
Will you be offering as an add on kit to retrofit to all of us that already have a blade?
Nice, but I'm waiting for the hydraulic gauge wheels. I'm sure Ted will be doing that soon
Hey Ted, could those mounts be added to the wicked box blades as well to be able to run gauge wheels on a box blade?
We will be offering gauge wheels/brackets for our box blades soon. Concerning being able to interchange... I can’t say it will function properly at all though. The box blade gauge wheel tubes are 3” shorter and have a good bit of angle in them compared to the rake/ scrape blade tubes. You'll see the latest news and offerings in the EA Channel Group here: facebook.com/groups/EverythingAttachmentsLounge
Like what I see .onweb site go to purchase your order page not found goes blank are you still in business ?
Is this still available? I’m trying to order the EA XTreme Duty 6 way Tractor Scrape Blade but the gauge wheel option is only offered on the deluxe. The video looks like it’s a xtreme frame with a deluxe scrape blade.
Yes this is still available. We put the brackets on all scrape blades now, if you need help ordering give us a call.
I tried to order an extreme duty with gauge wheels today and was told it was unavailable. Please confirm/clarify, Thanks.@@EverythingAttachments
Are you guys still in business? No phone numbers working
We are still here, but having some phone issues.
If he can’t sell it to you wearing bluejeans then you don’t need it.