Thanks for this video, it is today still very useful. I cleaned the printhead of my Kodak ESP 3250 exactly the way you described in the video but i have a new problem. The error message code 3508 keeps appearing, i follow the instructions in the printer display to replace the colour ink cartridge but tho one i have, was just cleaned and doesn't need replacing i think. Can someone help with this please?
What if...……….I had 2 brand new Kodak printheads that have never had ink through them before and they go through the motions but no ink is getting to the paper? I also bought a cleaning kit from Ebay and getting ready to use it on the one old "good" printhead that's been used a lot but has been streaking. Printer I have is the Kodak ESP 3.2 btw.
I have all new ink, but the printer will not print. I have a new print head I have had several years. Should I replace that and then add the new ink, Will it print?
Hi Mr. Printer Guy - Would a Samsung CLP-415NW that won't turn on at all (seems like no power even if plugged in) is worth trying to fix? I think it would be a power supply issue or power board? I can't even find many parts for it on e-Bay. I have tried using different power cords and different outlets same result. I got it refurbished years ago and worked flawlessly until the one day it died quietly. Thanks
The error message code 3513 keeps appearing. Printhead loose or missing. I tried to remove and reinstall the cartridges and printhead several times and this doesn't seem to solve the problem. Can someone help please?
My printer says paper jam but my cartridge is stuck the ribbon was just hanging there is it junk or fixable ? Worth fixing or would buying a new printer be best
I have a Kodak ESP C310 and when I pulled the head out there was a lot of caked on ink at the bottom. No idea ink leaked thru like that. It was all over tho. I’m gonna wash all the ink off and see what happens 🤞🏾🤞🏾🤞🏾
I have a Kodak Esp 3250 printer that won't print black even after I cleaned the print head . If it does print at all it is very light almost invisible.
After I installed two new ink cartridges, the ESP5 printer readout says Printhead is missing or loose and will not operate at all. I took out the cartidges and Printhead and put them back in as instructed. No luck. Do you think it is the prinhead with dried up ink and has to be cleaned as in your video?? or the new ink cartridges?
I have an ESP 7 printer that constantly says I have a paper jam. This time when I opened the top the printer ink does not go to the middle. Any suggestions?
I have the kodak esp 7250 #10 model I suppose. An I've printed out 2 pic an when I changed the cartridge, it's been saying Printhead Cartridge jam, Open printer access door, clear any obstruction, check installation of printhead an ink cartridges, close door. I've done all that an I've cleaned out the cartridge an that piece an still same thing. Can u pls help me figure this out?
Keep away from these printers I owned a hero 3.1 I found I couldn't tap out a document via phone or a tablet through wifi ,wifi direct or even tethering not even a murma between any communication for printing . I even copy a simple document on sd card then using the adapter just to find my simple document could not be displayed on the screen to print out WTF was kodak thinking when they made this piece of junk? The moment I took it out the box was the moment it was smashed as trashed . Kodak better stick with 35mm film making instead of making dumb tech that doesn't work I now own a Epson which makes kodak like a toy
I have a Kodak printer ESP 7250. I have never been able to figure out how to set the ink level to use less when printing. Can you please help me with this? It just uses so much ink on each print. It makes the pictures look bad.
I've tried this, all of it seems to be going well but it still doesn't print especially black! 😭 I feel like this isn't fair because I remember I've got my printer 4 years ago but I rarely used it so I do believe that the head has dried up but now that I've cleaned it follow this instructions it still doesn't work!! I just don't think it's fair for me to buy new printhead when I know for fact that it shouldn't be broken and I've rarely used to it! I have it for about 4/5 years now but I probably use it to print like 10 times, I can even count! I just think it's so unfair if the head has broke when I use it like 10 times! 😭😭
⬇️Print-head Cleaning Kit: amzn.to/2MyiUM8
Intelligence in your video showed again I was looking always about these kind of solutions. Thankyou Sir!
Great instruction, easy method, provides every link to everything you need and then some. Thank you. This was easy.
Thanks for this video, it is today still very useful. I cleaned the printhead of my Kodak ESP 3250 exactly the way you described in the video but i have a new problem. The error message code 3508 keeps appearing, i follow the instructions in the printer display to replace the colour ink cartridge but tho one i have, was just cleaned and doesn't need replacing i think. Can someone help with this please?
What if...……….I had 2 brand new Kodak printheads that have never had ink through them before and they go through the motions but no ink is getting to the paper? I also bought a cleaning kit from Ebay and getting ready to use it on the one old "good" printhead that's been used a lot but has been streaking. Printer I have is the Kodak ESP 3.2 btw.
You did not mention what chemical you are pushing through the print head.
Ionized cleaning solution. I can provide an msds sheet if you message my store via Amazon.
I have all new ink, but the printer will not print. I have a new print head I have had several years. Should I replace that and then add the new ink, Will it print?
Hi Mr. Printer Guy - Would a Samsung CLP-415NW that won't turn on at all (seems like no power even if plugged in) is worth trying to fix? I think it would be a power supply issue or power board? I can't even find many parts for it on e-Bay. I have tried using different power cords and different outlets same result. I got it refurbished years ago and worked flawlessly until the one day it died quietly. Thanks
I really would've messed with it. If it's not powering on, it may not be worth your trouble.
Thanks Printer Guy! I won't bother then...except to recycle it.
my ESP 7250 keeps saying paper jam but I can find no paper jam and I have taken apart many, many times. It will not feed the paper in order to print.
The error message code 3513 keeps appearing. Printhead loose or missing. I tried to remove and reinstall the cartridges and printhead several times and this doesn't seem to solve the problem. Can someone help please?
What is it your putting through to clean it, water or what ???
according to amazon, " ionized cleaning solution specifically for printheads , not isopropyl alcohol. "
My printer is printer is print the wrong size Esp 3200 Kodak l had set 8/10.come out 5/7
The printer sensors may be off.
My printer says paper jam but my cartridge is stuck the ribbon was just hanging there is it junk or fixable ? Worth fixing or would buying a new printer be best
I have a Kodak ESP C310 and when I pulled the head out there was a lot of caked on ink at the bottom. No idea ink leaked thru like that. It was all over tho. I’m gonna wash all the ink off and see what happens 🤞🏾🤞🏾🤞🏾
Great video . Kodak make the worst printers in the world .
Hi I have cleaned it trying again to get the printer to behave had it for ten years and don't know if new print head is needed?
Yes most likely
There was only the link to the cleaning kit. What about the print head?
Very helpful
Glad to hear that!
Why cant I find the link to purchase printerhead or a printer that uses the kodak 10 ink cartridges?
Hi here is the link for the cleaning kit, geni.us/wArXsZT
Here is the link for the Kodak ESP 7 All-in-One Printer: amzn.to/2PjedqD
kodak 3250 all in one. removed print head and found a loose spring , can`t see where it belongs. Any ideas?
I have a Kodak Esp 3250 printer that won't print black even after I cleaned the print head . If it does print at all it is very light almost invisible.
After I installed two new ink cartridges, the ESP5 printer readout says Printhead is missing or loose and will not operate at all. I took out the cartidges and Printhead and put them back in as instructed. No luck. Do you think it is the prinhead with dried up ink and has to be cleaned as in your video?? or the new ink cartridges?
It could be either to be honest these printers can be a bit complicated
So Branden can I do this same process for Kodak ESP 9
Yes because it has the same type of printhead.
How can I connect to it
my printer wont print in blk and in color it prints like a negative i have a kodak esp 315
I have an ESP 7 printer that constantly says I have a paper jam. This time when I opened the top the printer ink does not go to the middle. Any suggestions?
I have the kodak esp 7250 #10 model I suppose. An I've printed out 2 pic an when I changed the cartridge, it's been saying Printhead Cartridge jam, Open printer access door, clear any obstruction, check installation of printhead an ink cartridges, close door. I've done all that an I've cleaned out the cartridge an that piece an still same thing. Can u pls help me figure this out?
It's cheaper just to buy a new printhead!!!
Maybe
Keep away from these printers I owned a hero 3.1 I found I couldn't tap out a document via phone or a tablet through wifi ,wifi direct or even tethering not even a murma between any communication for printing . I even copy a simple document on sd card then using the adapter just to find my simple document could not be displayed on the screen to print out WTF was kodak thinking when they made this piece of junk? The moment I took it out the box was the moment it was smashed as trashed . Kodak better stick with 35mm film making instead of making dumb tech that doesn't work I now own a Epson which makes kodak like a toy
Yeah Kodak printers were dead 5 years ago.
I have a Kodak printer ESP 7250. I have never been able to figure out how to set the ink level to use less when printing. Can you please help me with this? It just uses so much ink on each print. It makes the pictures look bad.
i can buy a new printer for 49.95 +tax 55. 00 free shipping I will 86 my 7.1....cleaner is 25.00
Let me know where I can get that deal.
I've tried this, all of it seems to be going well but it still doesn't print especially black! 😭 I feel like this isn't fair because I remember I've got my printer 4 years ago but I rarely used it so I do believe that the head has dried up but now that I've cleaned it follow this instructions it still doesn't work!! I just don't think it's fair for me to buy new printhead when I know for fact that it shouldn't be broken and I've rarely used to it! I have it for about 4/5 years now but I probably use it to print like 10 times, I can even count! I just think it's so unfair if the head has broke when I use it like 10 times! 😭😭