knipex Needle nose pliers Restoration
Vložit
- čas přidán 21. 08. 2024
- Hello everyone
Today I bring you a clip with Restoration knipex Needle nose pliers taken by the floods in Germany in 2021 .It was extremely rusty and full of dirt and mud, plus it was blocked. I removed the rust layer with a wire brush , but it was still stuck and I chose to leave it in the vinegar for a week .After a week the rust practically softened, I applied wd-40 and I managed to unlock it. I managed to remove the handles, and for better removal of dirt, I used sandblasting.
The rust left traces in the metal, where I had nothing to do, but I also fixed it with a file and abrasive paper.The handles were easy to clean from dirt, after a short heat with the flame the matting was removed. to make sure you don't get attacked by rust, I decided to make it bluing steel .
Great job 👍 I liked the flame trick on the handles, made them look new again. Well done 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks bro 🙏🇦🇺
Nice job! I restored a pair of knipex diagonal cutters I bought at a yard sale for 2 bucks, they were not as rusty as yours but they were pretty bad, I restored then and got them functional, im satisfied with how they turned out but after seeing this, i wish I would of spent more time.
From rusted one to new one. Amazing.
Thanks :)
Excellent! Knipex makes such great tools, it would have been a shame for these pliers to die a rusty death. :) Really enjoy your work.
the price-quality ratio is excellent :)
Very quick and easy restoration, was enjoyable to watch 👍
Thanks :)
Fantastic Restoration!
Thanks 💪🙏
High quality work, congratulations friend.
Thanks 🤝🙏
Frumos lucrat, sculele de calitate merită restaurate ,bravo ,îmi place !!! 👍👍❤❤👌👌
Tot ce e marca Knipex sunt scule de calitate superioară , sunt și destul de scumpe . Se merita refăcute mai ales când este atât de ușor sa o faci 😇
Simple, efective I like a lot
Is einfach so entspannt anzusehen
Danke, das Tool stammt aus meinem eigenen Land :)
that good ideas
Thanks 😇
Amazing, love the hand tools restorations.
Thanks :)
Молодец отличная рестоврация
That's very well done. ❤️
Thanks
Nice restore mate. Keep going. 👌😊
thanks :)
It looks great!!
Enjoyed your video and I gave it a Thumbs Up for support
Thanks :)
Bravo 👏👏👌👍💪
Multumesc Zeule
Güzel çalışma oldu, tebrikler dostum.
teşekkür ederim
Congratulations!
Thanks 😇
Very well done job, not too much and not too little.
excellent job
Thanks 😇
Well done.
Thanks 🙏🤝🇦🇺
Bom trabalho 👏👏
Obrigado
A ieșit foarte bine, felicitări!
Mulțumesc 🤝
Great video
Thanks
Nice job.
Thanks :)
👍👍👍👍
🙏
Excellent👌!
thanks
@@GarageRestoration, you're welcome!
great job!
Thanks bro 🙏
Nice job :)
Nice Job :)
good job 🖖🏽
master golden handsssss
Thanks
Another good restoration mate👍 maybe next project a double bit axe if you could find one keep up the good work 👌
Thanks :)
KFC turned McDonalds 👍
Super tare
Mulțumesc 🙏
Very satisfying! What lacquer do you recommend to prevent rust build up on hand tools?
Edit I've seen you bluing can this be applied on already on non aluminum?
Honestly, you can't really stop the rust, aluminum doesn't rust, it oxidizes. blueing is good for steel
amazing job friend,
i have a question,
where to buy this big bottle of bluing ?
Amazon.de
Hi this was a great video but I have a quick question. Is there anyway you can remove the center pin of the pliers? Thanks
This rust looks recent and intentional.
Happy Easter
Thanks
These little hands genuinely make me anxious
Thanks :)
👍
🙏
💪💪
Mersi mr Vlad 🤝🙏💪
FAKE ROST!!! Das sieht man doch aus 10km Entfernung! Lest weiter, da erkläre ich warum:
Ne Quatsch, wer dazu Fake sagt ist zu oft auf den Kopf gefallen. 😀
Tolle Arbeit und die Griffe sind ja mal richtig gut geworden wegen dem Gasbrenner! Das Probier ich demnächst auch mal bei meinen alten Zangen aus.
Si la ruggine fai in modo di arrestare e nn perseguitare forse la ruggine nn viene più a nessuno buon lavoro
Salut..am și eu o întrebare.. soluția respectivă de bluing o găsești și în România..și dacă da unde..și dacă nu crezi că a-și putea găsi ceva asemănător in România?
Salut , eu nu am cumparat-o din România , am luat-o de pe Amazon . In România nu am găsit nici o soluție pentru ce am eu nevoie . Din ce știu ce știu sunt unele soluții de înnegrit pistoalele dar nu știu cât sunt de eficiente 🙏
@@GarageRestoration Ok am înțeles.. mulțumesc că mai lămurit 🙏🏻
Hello, this video is posted on tysy tube Facebook page, are you related with him?
Yes, I allowed him to post my promotional video :)
How did they taste?
What is that thing you used on the rubber handles?
Like fixed
Thanks
@@GarageRestoration :)
What did you do to it?
Ну хоть этот не стал пластик красить. А поступил правильно.
Стыдно батенька это не краска а холодное воронение
@@user-cy9nb5he2i я про ручки пластиковые
Un sfat: Sarea de lamaie e mai ok decat otetul. Nu miroase, ataca metalul mai putin decat otetul si poti face solutia de sare de lamaie cat de concentrata doresti.
Sincer nu am încercat nici o data , nici nu știam ca poți curată cu așa ceva , ideea cu oțetul a fost ca era foarte înțepenit și oțetul a eliminat rugina de ka bolt . Nu știu cum va reacționa publicul la sare de lămâie , și așa îmi s-ar in cap mulți ca oțetul este pentru murături nu pentru rugina 🙄😂😂😂
@@GarageRestoration cine iti sare in cap la faza cu otetul nu stie despre ce vorbeste. Orice acid merge impotriva ruginei, ba chiar mai mult acizii slabi ca otetul si sarea de lamaie nu ataca metalul atat de tare ca altele cum ar fi detartrantul (care are acid clorhidric sau sulfuric in el). Doar ca otetul pute spre deosebire de sarea de lamaie si dureaza la fel de mult sa elimine rugina.
Ideal ar fi sa folosesti ceva pe baza de agent de chelare gen evapo-rust fiindca ala chiar nu se atinge de metalul "virgin" si este refolosibil dar se gasesc greu la noi (de obicei sunt porcarii pe baza de acid fosforic cu "aditivi de chelare" adica EDTA (stabilizator)).
Evapo rust zici ? Ai idee cat costa :)) ? Clipurile astea au loato razna putin , ca sa faci vizualizari trebuie sa ti pasul cu cele mai bune canale , care baga mii de euro pentru o scula de 2 lei ......Sa ajuns sa se curete cu laserul rugina :)) ....inteleg ce spui tu , si atat otetul cat si sarea de lamaie sunt ok , dar dupa ce vad pe uni ca ia cu laser , uni mc 51 sau electroliza ....cand vine unul cu otet da x la pagina si se dezaboneaza :).
@@GarageRestoration omu se mira cat costa evapo-rust dar are ditamai sticla de solutie de bluing. :))
Multi au following pentru spectacol (lustruire oglinda, magia editarii clipurilor gen pocnesc din degete si o piesa murdara devine curata, unelte mai rare cum ar fi laserul, electroliza etc).
Pana la urma poti face ceva amuzant cum ar fi sa redenumesti substantele si uneltele altfel spre exemplu: in loc de "bluing solution", zici "didndu' nuffin' sauce" (nu zi asta, inseamna ca faci misto de negri) sau in loc de "polish" zici "shining mud".
Sticla aia de solutie a fost cam 50 euro , si fac deja de 1 an din ea si nu sa dus nici un sfert , pe cand evaporust trebuie comandat din USA si costa mai bine 50 euro litru , si cam 5 litri imi sunt necesari minim . Plus ca se uzeaza repede , o sa folosesc doar daca primesc o sponsorizare :))
Why aren’t you out hunting those turkeys in the background?… Tagged out already?
My neighbor has a small farm, it's very annoying sometimes :(
Knipex don't have these Ugly handles..! Maybe is a good Copy of "Facom" pliers...they have this style ,half Red and half Yellow...
www.lowes.com/pd/KNIPEX-6-55-in-Electrical-Flat-Nose-Pliers/1000679437
those with yellow are intended for electricity
3:56 it's fake rust and also fake knipex - real knipex is german made and does not rust
They do rust
maaan it's 20 bucks, just get a new pair... plus we all know you threw these in the sea yourself.
Its not about that, its about recycling and the process itself, jus tlike artist could just go buy a painting but chooses not to.
👎👎👎
For what 🤔