Ali, I've been following your channel for several years now, and it still brings a smile to my face that there's at least one RC CZcamsr out there that still heavily features helis *AND* gets excited about them. Love to see it. Peace from Ireland!
Man, those crashes were brutal! And that little heli just got up and flew as if nothing happened! I just got one of these and this video is very inspiring. I'm not going to try aerobatics yet, just normal flying is hard enough. But it's nice to watch what this little machine is capable of in the hands of an experienced pilot like yourself.
Xk 110s le meilleur helicopter 3d pour aprendre la 3d sans rien cassé valeur sur c’est le numéro 1 pour les débutant je suis comme un mome très facile à prendre en main et la version rtf franchement la radio x6 fait vraiment le taf
I have been flying this little helicopter for 9 months now. It takes a lot of abuse, but things brake now and then. The spur has the tendency to go lower on the shaft. You lose climbing power when thats the case. I have loctited a screw in the hollow shaft to prevent this. The spur will deform from the crashes. This will result in bad vibrations and make it fly very unstable. Some times you can straighten the spur and sometimes you need to replace it. The turning half of the swashplate has the tendency to separate from the stationary half in a crash. Sometimes you can push it back in and sometimes you need to replace the swashplate. The tailboom will split after a number of crashes. Recently the helicopter lost climbing power. The culprit were the servo’s that lost power over time. When applying collective, the cyclic servo’s were pushed down. Got them replaced and the problem is solved. Parts are very cheap, but i have to wait 2 or 3 weeks for them to arrive from china. So i stocked up on certain parts. When learning new moves i always take this heli because it crashes so well and saves me a lot of money. I saw Ali catch the heli in mid air. I did this a few times because the landing gear was broken. I don’t do that anymore, because the last time the blades hit my thumb and resulted in a deep cut. It’s more dangerous than you might think.
I noticed alot of people saying the k110 didnt have a brushless motor. Because it did habe a brushless motor. I believe the tail was brushed. The k110s tail motor is coreless. The k110 did in fact have a brushless motor. So maybe its a more powerful brushless motor now. The servos are much better now. Have a good one bro
Guys this or the K110 is the best heli you can get for learning 3D without breaking the bank trust me I've tried many many brands and spent thousands of dollars on brand names and I still stick to my K110 and OMP M1
# Im 100 in Likes & about 400 times crashing the 110 Blast. Pick it back up , get the vegetation off & send it again. They are that good & nearly indestructibles. Good review as always amigo , on this great & affordable Micro.
Right on. A new tutorial to set it up with TX16S is coming soon. right now resting at home mostly with 4 hairline fractured ribs. I found sneezing is the most painful thing in the world when you have fractured ribs 🤣
ah no worries it happens. it was a blind spot turn. both car driver and I could not see each other and it was too late when we did. anyways, good news is before yesterday I even flew my Electric paramotor :D when a man has the passion to fly, nothing stops him. still living with the pain but it will heal in time
bigger is better but XK K110S will save you lots of time and money in terms of when you are crashing it. it won't break and also having no GPS you will learn faster.
@@alishanmao Thanks, bro how many K110S tail motors must I buy for replacement. So you think I should buy a 450 size heli plus K110S too Be grateful if you can recommend on the 450 model to buy 😂
@@alishanmao Hi Ali ! I've seen yours videos, there are all your setups except the gyro rate ! What is your 3D gyro seting between 0 and 30 ? Thanks James
@@alishanmao On this video czcams.com/video/wpxRwv6O6ZU/video.html you say to don't change original settings. So when I look at model n°4 on my XK X6 transmitter at 3D gyro setting is 25. Do you confirm it's your's ?
Ali, I've been following your channel for several years now, and it still brings a smile to my face that there's at least one RC CZcamsr out there that still heavily features helis *AND* gets excited about them. Love to see it. Peace from Ireland!
Thank you for your continued support buddy. more helicopter action coming soon.
Man, those crashes were brutal! And that little heli just got up and flew as if nothing happened! I just got one of these and this video is very inspiring. I'm not going to try aerobatics yet, just normal flying is hard enough. But it's nice to watch what this little machine is capable of in the hands of an experienced pilot like yourself.
good choice, this is really a tough heli. and to be honest its still alive and kicking
Xk 110s le meilleur helicopter 3d pour aprendre la 3d sans rien cassé valeur sur c’est le numéro 1 pour les débutant je suis comme un mome très facile à prendre en main et la version rtf franchement la radio x6 fait vraiment le taf
good :)
@@alishanmao monsieur saurez vous combien de kv est le moteur sans Balé du rotor ?
Et combien pour celui de l’arrière à charbon ?
I have been flying this little helicopter for 9 months now. It takes a lot of abuse, but things brake now and then. The spur has the tendency to go lower on the shaft. You lose climbing power when thats the case. I have loctited a screw in the hollow shaft to prevent this. The spur will deform from the crashes. This will result in bad vibrations and make it fly very unstable. Some times you can straighten the spur and sometimes you need to replace it. The turning half of the swashplate has the tendency to separate from the stationary half in a crash. Sometimes you can push it back in and sometimes you need to replace the swashplate. The tailboom will split after a number of crashes. Recently the helicopter lost climbing power. The culprit were the servo’s that lost power over time. When applying collective, the cyclic servo’s were pushed down. Got them replaced and the problem is solved. Parts are very cheap, but i have to wait 2 or 3 weeks for them to arrive from china. So i stocked up on certain parts.
When learning new moves i always take this heli because it crashes so well and saves me a lot of money. I saw Ali catch the heli in mid air. I did this a few times because the landing gear was broken. I don’t do that anymore, because the last time the blades hit my thumb and resulted in a deep cut. It’s more dangerous than you might think.
Thanks for sharing
The first version had a brushless motor as well. 🚁
Man, I'm jealous of your rc flying skills! 👍😲
Thanks 👍 buddy. don't be. my skills are really bad now
Oh No! Now I really gotta go and get me another XK 110 (S this time)! Thanks for the Video!!! :)
You should! these are sure keepers
I noticed alot of people saying the k110 didnt have a brushless motor. Because it did habe a brushless motor. I believe the tail was brushed. The k110s tail motor is coreless. The k110 did in fact have a brushless motor. So maybe its a more powerful brushless motor now. The servos are much better now. Have a good one bro
thanks :)
What a great helicopter, this helicopter will be great for me to learn 3D .
it sure is
Guys this or the K110 is the best heli you can get for learning 3D without breaking the bank trust me I've tried many many brands and spent thousands of dollars on brand names and I still stick to my K110 and OMP M1
agreed :) 100%
Yes it is.........
# Im 100 in Likes & about 400 times crashing the 110 Blast. Pick it back up , get the vegetation off & send it again. They are that good & nearly indestructibles. Good review as always amigo , on this great & affordable Micro.
Right on. A new tutorial to set it up with TX16S is coming soon. right now resting at home mostly with 4 hairline fractured ribs. I found sneezing is the most painful thing in the world when you have fractured ribs 🤣
@@alishanmaoIm sorry to hear that , refrain from laughing althou it can be hard & slow down , have an xray done and get some needed rest.
ah no worries it happens. it was a blind spot turn. both car driver and I could not see each other and it was too late when we did. anyways, good news is before yesterday I even flew my Electric paramotor :D when a man has the passion to fly, nothing stops him. still living with the pain but it will heal in time
Hello need a video about this k110s setup with the xk x6 transmitter video
watch it on my channel. i already posted it
waalaikumsalam sir..nice heli support
Esse helicóptero e show irmão! Top!!!
Thanks you brother. Where is your hobby shop
I enjoyed your video and your personality is refreshing. Would you recommend a beginner to learn step by step with a XK K110S? Thanks
yes if you do not want flight simulators. XK K110s i best because its really very crash resistant and durable
What's the name and model of the scooter you use to go to the park to enjoy your RC toys?
It looks really sophisticated.
DuoTork 13X
onlyflyingmachines.com/product-category/emobo/
Amazing content. Hope you keep raw nature of your channel up. We have enough of marketing and unboxing channels.
That's the plan! More content coming soon. thank you for your support to my work
Wkakje
Multiplex eat your heart out.
NIIICE 🔥👍✌️
Seems to me that this has more control authority than the previous gps heli.
Pssst its the skills :D
bro better to buy XK K110S or Flywing FW 450 for beginner trying to learn 3D or should there be other models to consider ...
bigger is better but XK K110S will save you lots of time and money in terms of when you are crashing it. it won't break and also having no GPS you will learn faster.
@@alishanmao Thanks, bro
how many K110S tail motors must I buy for replacement.
So you think I should buy a 450 size heli plus K110S too
Be grateful if you can recommend on the 450 model to buy 😂
Passando aqui para prestigiar o canal forte abraço..
thanks buddy
want to ask: how do you activate the 3D mode on this T14SG transmitter? please hint
T14SG automatically assigns and set the flight modes. if I remember its the switch on the left. SG or SE
banggood states its exactly the same components as the 110 just a different canopy ?
LOL really :)
Hello, your K110S seems to be very stable in 3D mode, what are your gyro settings between 0 to 30 in 3D mode please ?
I have posted my setup in a how to video on my channel. please watch
@@alishanmao Hi Ali !
I've seen yours videos, there are all your setups except the gyro rate !
What is your 3D gyro seting between 0 and 30 ?
Thanks James
@@dpsj28 with opentx i just keep it +100 and -100
@@alishanmao
On this video czcams.com/video/wpxRwv6O6ZU/video.html you say to don't change original settings. So when I look at model n°4 on my XK X6 transmitter at 3D gyro setting is 25. Do you confirm it's your's ?
Nice Sir 👍
Thanks and welcome
Assalamualaikumm
wassalam
Alhamdulillah
WHY DONT YOU EVER TRY AN EHANG 216 BRO ???
LOL no, I wanna stay away from that death trap
@@alishanmao WHY DONT THEY ATTACH PROP GUARD BRO ??
Helli bro what price in INR
check with online currency converter :D
noooooooo- not the crash word.
Crash is the best :D
its a pity dey wont allow to send to my country
find a way around. don't give up
YOU LOOK OLDER NOW BRO 😂🙏
everyone gets old
?dk대성사동화산알시헬ㄹ기