Running Out Of Time On Our 190E DTM Tribute - Widebody, Cage, & Throwback Livery | Golden Era Ep.4
Vložit
- čas přidán 5. 07. 2024
- ► A race car’s wild flares, wings, and splitters are just as memorable as the sounds they make and how they drive. Our Golden Era Project needed to emulate those late-90s DTM cars as best as possible, and there was no better way to do that than with a period-correct widebody kit replicating the original championship-winning Mercedes 190E. However, a three-month-long ordeal bringing over the body kit from Europe has put the team on the back foot as they scramble to get the 190E 2.0-16 ready for Gridlife Circuit Legends.
While waiting for the EVO II body kit to arrive from Germany, the 190E has been down at JPC Fabrication getting its roll cage installed along with various other supports and braces fabbed up for final assembly. Once Nate arrives with the Evo 2 panels, there’s little time to trim, fit, and finish the bodywork before the looming Gridlife deadline. Watch along as our 190E goes from simple sedan to winged wonder, thanks to the help of a couple of dedicated shops and a team of expert wrappers, right here on Episode 4 of the Golden Era Project.
Shop Parts On FCP Euro - www.fcpeuro.com/?...
Learn More About The Golden Era Project Here - info.fcpeuro.com/goldenera?ut...
Shop All Schaeffler Parts - www.fcpeuro.com/INA-parts/?ut...
Shop all Hengst Filtration Products - www.fcpeuro.com/Hengst-parts/...
00:00 - Intro
00:35 - Evo2 History & Body Panels
02:27 - Roll Cage & Custom work at JPC Fabrication
06:31 - Off to the Body Shop
09:06 - Time for a Livery
14:22 - GridLife Reveal
SUBSCRIBE: czcams.com/users/fcpeuro?sub_c...
Get free parts from FCP Euro:
www.fcpeuro.com/page/lifetime...
Follow FCP Euro on:
/ fcpeuro
/ fcpeuro
/ fcpeuro
www.fcpeuro.com/ - Auta a dopravní prostředky
Tune in next Thursday for a Live Q&A with the team as they finish up wiring the engine harness and try to get the car running!
Where i can buy that body kit?
Ohhh what would I give just to see someone make an Alfa Romeo 155 DTM project car like this one. It was a killer and a real nightmare for germans on the track.
This is another dimension against this project. A lot of those parts are not at all available any more and it was another era of DTM
On insta there is a guy with such a replica
This is hands down my dream car. Amazing work and creative vision.
Pretty nice project ,love the engine choice.
I’m currently building a e36 DTM tribute or replica…
I’m using a m42b18 ,turbocharged,pushrod suspension and so on.
Those are the projects that I love the most.
Congratulations,good job!
This is a fantastic series... really well made and I really like the style of the history, video, & narration combination. I'd love to see more of this, great work!
I am really excited to see this build completed. I really hope it encourages more builds like this on the channel using different chassis, drivetrains, built to pay homage to cars raced in different eras. I don't remember the car but maybe the first that red AMG Mercedes sedan, some Porsche 911s (air cooled first choice) even a 996 since they don't gfet much love but done right could be really nice, and then maybe a BMW 2002 or 635. A 2002 or÷sr 635 could be really cool since people mostly build different generations of the M3. Or if you took a kit car and assembled it using the parts you offer for a very close replica of what was raced in period.
Can't wait to see more of this!!
Achingly gorgeous car…my god😍😍😍😍😍. I don’t think I’ll have ever wanted anything more in my life than this car when you guys are finished….just pure perfection.
I’m honestly not sure a more desirable car could possibly exist in my opinion…..you can have your Gunther works and Singer museum cars, this is a real race car!!!
Ok with the livery is beautiful BUT hear me out... the all white was like a secret project version and looked so dope!! Love the wheel spec too!
Now you're talkin' ... Measurable distance to the "Finish line." Cannot wait.. Thanks for the update.
You know it Kiss Kiss - the team is cranking away to get this car up and running!
One of the most amazing build I have seen!
Thanks Andrew, we are glad you're finding it amazing!
Trumendesss outcome 👏👏👏👏.. speechless.. can't wait to see the performance
2 of my top 20 cars ever ; 190e Evo and BMW M3 e30, absolute legends
I am loving this project ❤️
Thanks Phillip
the voiceover is ... out of this world.
amazing.
everything else is also top notch.
congrats.
Kudos to all involved... espically with the livery design. A period-correct aesthetic with a nonoverbearing modern twist. That's not easy to pull off, and this is a job well done.
We couldnt agree more WheelPrice , it was an enjoyable creative process working through the livery with 8380 Industries!
Remember the 2.5l that ran this car amazing engine both the inline4 and v6 versions were so good man dtm in 90s was special
Reason why we called this project "Golden Era" there was nothing like it!
When was there a v6 w201?
@@Pg-xs4tr there wasn’t lol I think he means inline 6
@@peakperformance8960 wait, you mean 6 cylinders aren't all V6? Damn /jk
M104 is way more solid.
New subscriber here i just cant get enough of the 190
This is so awesome, my favorite series from FCP Euro so far!!
Really glad you're enjoying it BIMMER ZEIT, slowly but steadily we are figuring out this Build series thing 😂
That car looks the BOSS!!
MORE PLEASE ASAP!!
Live Q&A next Thursday Ian!
I got the 1986 190E 2.3. It’s was the awesome little Benz that love to carve the canyon road. I modified my car with Bilstien sport shocks and H&R springs.
What an awesome series. I wish you guys a put your AmG GT4 builds and race prep on CZcams as well. You have a very talented team.
That build quality...👍👍
☺Thanks tetchan, we are happy with how this build is progressing
Im excited to see how the front knuckle setup works in the end. Hoping to do that on my own car so I can easily run w204 brakes & struts.
Awesome build and editing/voiceover & videography well done guys 👍🏽
Thanks Mr Sam , the team is hard at work on this project as a whole!
Fantastic car build
Looks amazing!!!😍
Thanks Matt's Garage!
One of my favorite mercs
Thanks Hyper #8 - we think you'll love it even more once its done.
Awesome project fellas 🤩
Nice job on this series!
Glad you enjoy it!
This is gonna be amazing
We hope so Victor!
Incredible build any Mercedes enthusiasts dream
That was the goal 😁
I believe the way the engine oil distribution can be registered to the level of performance that the car is built for a real race team sure will be a good security of long lived engine open track fun .
I Saw another 190E there
You Will make videos of it?
*Can't wait to see this project finished
Nice nice I like it.
I was there loved the car great job guys
Thanks Antonion, glad you got to see it in person!
Great project FCP. Could you guys explain the effects to ackerman when you changed the steering setup.
Amazing build, who did you order the body kit from in germany?
E30 m3 is a nice car, the 190 Evo 2 tho😍😍😍
Can't go wrong with either, but the 190e was in need of some more spotlight!
I Love your work ! You are awesome ! Please give me more from this 190e 2.0l Turbo. I biuld in my litte Garage an 190e 2.3 Kompressor. Its Difficult to get a licence for the roads in Germany
Nice, I only wish I could hear it roar :)
Great video guys. What was the part number in the end for the ball joint in the front arm? Best wishes from the UK 🇬🇧
Did you full on weld up the sunroof or fiberglass it up just so it has the right look. If they were able to fit that body kit and everything else going on with that in that super tight time line DAMN!!! Impressive, if not it's understandable that it was done quickly to get the car finished to go back and weld it it.
Top 👍
Is there a chance, when you finish the build you could produce a longer version all exclusive of the build with a build list? I have an 85 500sel and kind of hot rodding her. I would love to watch the whole build.
Roger it is in the plans once we wrap up to make a single longer video recapping the entire build!
The kit looks sick! May I ask where you ordered the kit? I used to ask a Germany kit shop one year ago but they told me they only ship within EU.
What are the rotiform wheel specs with offset to clear your coilovers and big brakes?
Can you do a smaller wheel? I got 22's on my car, but these look wild to me... LOL
Currently in the works of a 190 Evo kit on my 190e…
needs the front lip.Great project.
How many hours was it for fitting the body kit prep and paint?
Great! think I would keep it white :P
I'm so excited to do my 190E like this. God I can't wait, I just bought my 1990 190E though I wanna put a M104 engine in it though I wanna keep the OG leather seats but I'm thinking about going with a digital dash and have some ambient lighting like a newer Mercedes. Still not sure if I wanna turbo the M104 in the cause I don't want crazy stupid power I think 500 horsepower would be alright, but I'm not sure in RWD car. Any tips guys?
I’m gonna swap my 190d with a om606 I want big numbers but it’s prolly gonna take awhile it would be a good race
The M104 is an amazing engine with a lot of potential. It handles boost extremely well because of its forged internals and can handle your 500hp on a stock block any day of the week. If you go standalone (which you should) you can always make multiple maps with lower power for street us and rain if you want, but its almost a shame NOT to boost these things
@@kenmeri5832 I definitely want to be able to just enjoy cruising in the car so definitely would be a good idea and I know I'd want to have a povy rear dif too
@@kenmeri5832 Also what liter M104 is the best, cause I was thinking of getting a 3.2 liter, but another guy said make sure i get one with low compression
@@543nickb There is not too much of a mechanical difference between the 2.8 and the 3.2 as far as im aware, only that the 3.2 has a longer stroke and thus different power/torque charactaristics. Either way the compression ratio can be changed with a thicker gasket, shorter rods or pistons, its not something to worry too much about if you run under lets say 600 hp and even if you do go higher, you need to change rods anyway so might as well get short rods then. One thing to keep in mind however is that apparently there was a CR difference between engines that specifically came out of a W124, which was maybe what the guy was going for
Hy guys, nice work!
Did you see the 190E From fueltech too? They are making of a tributo from Ayrton Senna
► A race car’s wild flares, wings, and splitters are just as memorable as the sounds they make and how they drive. Our Golden Era Project needed to emulate those late-90s DTM cars as best as possible, and there was no better way to do that than with a period-correct widebody kit replicating the original championship-winning Mercedes 190E. However, a three-month-long ordeal bringing over the body kit from Europe has put the team on the back foot as they scramble to get the 190E 2.0-16 ready for Gridlife Circuit Legends.
This is such a cool build. Really love it.
Considering how much work those guys did in the body shop, it makes me wonder why there is a paint run on the fender at 14:35. I would loose my mind if i got that back like that.
They were not stoked on where things ended up but given what they turned around in 5 days (had not originally planned to do the work) we basically said do what you can to make it work, they want to still take the car back and refine anything they were not happy with. For the scope and turnaround, we were stoked with the work they did.
@@fcpeuro of course the timeframe was short, which does explain everything well.
Great that they will fix any blemishes that might be there, hard to find decent body Shops this day.
Building my dream car
Pretty sure the front air dam needs to be a loooooooooooooot deeper, bringing it closer to the ground and sticking out in front about an inch or two more.
But damn that looks good! Great job.
We will br working on the splitter and bumper fitment Mo, no worries!
What company did u use in Europe for the body kit please?
Really cool build, its refleshing swatching americans with euro builds 👌
Who's body kit did you use?
Bad ass
Thanks Brandon - its coming along
I wonder who is manufacturer of this body kit?
What company is the body kit from please?
❤❤❤
What are the fender flares made out of.
I looks plastic
I want to hear what’s going on with that mini Cooper in the background that kit what he got it it everything through a video on that in my family we have two mini coopers
We will do some more on the MINI in the future - it's our producer's personal race car it has been pieced together with fiberglass bits from a few different places. We'll have him talk more about it someday!
What company did yous use for the body kit????!
Its from Vuik Motorsport. Pesch makes one too tho.
Puikus wrap Dariau ;)
крутой проект ! но я ждал что по немецки будет рассказывать
Who was the body kit manufacturer?
shoutout to Darius Trinka he is from Lithuania, not from any masachusets
When are you guys wrapping Jacob’s Volvo wagon???
Once the car is finished up we will be putting a fresh wrap and livery on it!
Where did you guys get the Evo2 Kit?
Vuik Motorsport
15:10 shout out grant Anderson aka grit flanderson
8:17 somebody didn't watch the final edited master before distribution
Is this kit from Pesch Motorsport ? Amazing work .
Vuik Motorsport Theo Gi. Glad you're digging it
@@fcpeuro Vuik is in Netherlands not Germany
"right here" "right now" "up here" "hair" "here"
What company is the bodykit from?
interested too
What brand is the bodykit
Vuik Motorsport
I'm inspired to build my Benz's to their full potential! DANG!🤩
Should have bought a Göckel bodykit which is almost plug and play ...
We had looked at our options and went with the Vuik Motorsport kid but it certainly took some work.
@8:18...🤔 I think you should analyze the frames😋
Oof we know... big miss on the final export. Hate to see it, but the editors been fired.😅
so was the producer who checked it before it went out 🤣🤣
@@fcpeuro 🤣🤣🤣
Portuguese Evo II
💪💪💪💪👍👍👍👍✊🔥🔥🔥🔥
👍👏🇹🇷
New frames need analyzing; click Analyze.
Good job, very well done, craftsmanship, etc.. but I would never do something like this (butchering) to one of the most beautiful cars ever made. It is hard to find a nice clean e190 and you guys just destroyed it.
FCP Mercedes Sponsored by Larsen's Biscuits and Peniston Oil
I laughed way harder than I shouldve reading that
@@lukekindred1999 Took us a minute but we remembered....
So its a roller. I hope you guys actually finish it and dont push it in a corner and leave it
We've been working on it daily since. Live Q&A next week as we work through the wiring
We just finish the proces of production of the first - easy and good fitting body kit for EVO II. On the world's market there is one - bad template that is copied and copied by young amateurs of car-racing that are fascinated by fiberglass. We also manufacture MB w201 190 EVO II Replicas here in Gdansk Poland and when we tried to fit this dramaticaly non-fitting set (from Austria) we decided that over 130 of expensive working-hours that we had to sacrifice to fit it cannot be waisted and repeated. These 'aftermarket' sets do not fit, has no holders and mounts on both bumpers - also they have no closing arches along the tire line - why?, the screws glued in on the side arches are Dramaticaly not in their correct places, side skirts on doors - what do we do with them - glue them with kilograms of glue?? - they also must have bolts to fit them nice and easy. Our set is free of those problems but much more expensive - but still cheap. Also available in a demanded color so easier to paint or leave it like this. First 2 kits on March 2023 - Nr 1 on my private 300bhp 420Nm 190E 199 Schwarz-Blau with 2.0 M111 Engine :-), The story on my fb.
if you guys don't know, this car doesnt drive anything close to a regular 190e, the suspension geometry is completely whack, yes the work is amazing, but it simply doesnt work.
Love this project. But wheels are too big. May be 1-2 inch less wold be better. Good luck
The final forged wheels being made still are going to be 18's Vagif - these were to get the car back on the ground for the time being!
LoL
Big League of Legends fan?
This project is progressing slow
Oof... whats the suggested time frame dare2scheme? We are trying!
@@fcpeuro as a content creator and a vehicle parts distributor, I would say 1 season. But look back at this series and see how many updates and episodes you produced over what span of time...
Just unsubscribed. The commentary is unbearable.
'Ya hate to hear it. We'll miss you Christopher.
What ball joint did you guys used to work with front spindle from c63?
Hi Jurcic, we ended up using a MB GL Balljoint! www.fcpeuro.com/products/mercedes-suspension-ball-joint-1643520327
@@fcpeurohow did you fit it into the knuckle? Did you ream out the knuckle mounting hole? What’s the taper? Deets please 😊