Kumiko how to: Japanese woodworking asa no ha
Vložit
- čas přidán 29. 08. 2024
- In this video I share my process of how I go about making the Kumiko pattern known as Asa No Ha. I demonstrate making the accompanying jigs as well as making a small sample. If you feel up to it, give my method a try, its not as hard as it looks.
Tip Jar... / mikefarrington
After reading several articles and watching other videos, this is exactly what I’ve been looking for! I built a few jigs yesterday and cut some strips to start with before seeing this video. But discovered that you covered everything I had questions on before asking. I can now see myself becoming obsessed with the meticulousness of this addictive style of wood working. Very well done and hope to see your future videos.
Thats great to hear. I thought I would get board of kumiko, but as I do it more I find myself more interested. I have more videos in the works, stay tuned.
You are totally right about your sharpening regime. I have a Tormak and other jigs for diamond stone on grinder (for wood turning tools) and I never use them. I have two large and expensive diamond blocks (fine and super fine) and all my LN plane blades are sharpened quickly on them. I hate the idea of taking steel off my LN blades with a machine! Love your stuff man.
Thank you very much.
It's real finnicky to get the pieces to fit seamlessly but by the looks of it, you did it! Well done and thanks for sharing! :)
Thank you! 😊
Yes!!!!! Thank you 13 minutes in!! You may man are one of the first to confirm for me that you use a band Sander to effectively produce al lot of good strips!! I watched more then a 300 hours of CZcams read about 10 books about kumiko and have been making it kumiko ror the last year. And hands down the hardest part of it all is making those dame stips so consistent in thinknes.!!! Straight of the saw or with a planning jig takes ages. Really you are perhaps the first one confirming that a band Sander is the way to go if you want to bulk produce Stips! THANK YOU!!!! i am buying one right now! 🎉🎉
My pleasure. I have used a few methods for making strips. I can get pretty good parts right off the table saw, but a drum or wide belt will get the job done as well.
Well, this video was one that CZcams recommended because, as a keen amateur woodworker I watch such things, and I not only watched until the last frame but immediately clicked on ‘subscribe’. The quality of the shooting and sound, along with the timbre of your lovely, warm voice, plus the superb level of expertise, jig-making and end result, have all combined into what is, for me, the perfect example of a ‘how-to’ video. I am now going to watch your other videos and, even if I don’t actually try making this style of project, the information I now possess about methodology may well inform my own work at some point.
Thank you for taking such time and care over this and I await the lamp tutorials with great anticipation 😀
Wow, thank you very much. Its been fun to try and improve my videos each time and I think its starting to pay off. I'm happy you enjoyed the video.
Good lord, this is sheer madness when I am trying to think repeating this process for few hundred times for a standard size panel.
Dude, you are really a dying breed of carpenters, having this much patience.
I was thinking of more streamlining it by bavel cutting the shorter piece of wood blocks first and then cutting the strips.
Thank you. There are a few ways to speed things up. This version is the most basic way of doing it.
What a pleasant video. Lighting perfect. Editing.... just great.
Subject matter.... tops.
Skill and patience... brill.
Narration a pleasure to listen to. End product...... WOW !
Thank you very much. Happy to hear you enjoyed it.
Couldn't agree more with every word! Thank you Mike!
I think guys like Mike Farrington's videos, they're the woodworking equivalent of listening to music. It's relaxing.
@Fester Blats you must have a shoe in your head not a brain
@@josheh4 Girls like it too you ding dong.
Aloha Mike and way to go ! Disabled now and been woodworking for 40 years , making the most of my 'unplugged woodworking' , your Kumiko is just the thing to hone those skills ! Comes to me at the right time . Mahalo , Mark Baker
Hi Mark. Kumiko is perfect for an unplugged workshop. Also, its great because it take very little material to get started so its fairly inexpensive to give it a try.
The 'Jointmaker Pro' is how I might be productive with the grills for the current door at the shop . It is prefect for me ,since my 24/7 vertigo keeps me sitting and walking about a workshop with 1 or 2 canes is not safe for anyone , but the boss is so great ! He has held my position since this vertigo put my in a permanent spin cycle .
Inspired by you, I made 3 of these lamps, different sizes, including one as a wedding present for my niece. Thanks a lot for your help, she was thrilled by the present. The last one I did was a bit different, a ceiling lampshade in an octagonal design, also quite effective.
Thank you. Sounds like you're making some really nice projects, well done.
Beautiful job ; Here is an idea for accurate adjusting of your sliding strips in the angle blocks :-
1 ; a small slot at the back end, 2 ; A pin to slide in it. 3 ; A screw arrangement below with a small wingnut-
The complete idea being ; the thread used will have a known constant, accurate incremetal push or slide forwards, per angular turn of wingnut, & therefore by observing/noting the final req'd wing position, ie; optimal point for your first ideal fit, then the repeat pieces would all be made equal & much quicker. Hope you like it.
Thank you. That is a very good idea and would add a great deal of control. For me I have never taken the jigs any farther because they worked well enough. Next time around I may add this feature.
Your most welcome Mike- I was a designer for 55yrs-& spot such things in a jiffy.I'll look out for your future posts. Kind regards.
I watched it all... and no, I’ll never be trying this... I might watch the video again, while having a beer. Seriously dude, I love your videos and your talent.
Ha! Thank you. Maybe I should try watching with a beet as well.
I can totally respect the blurb at the beginning. So many dudes will put up a video like "How to make handmade 2x4 shims" and then immediately whip out a cnc router so you never know if a how to is gonna be an actual how to. Great video too.
Thank you. Happy to hear you appreciated the opening blurb. Really I was just trying to set expectations and be honest with what was to come.
WOW ! made it the end, and yes i would give it a go one of this days, month, years.....Great video
Thank you.
Thank you! Your method helped me a lot! I was frustrated trying to trim with a chisel and saw your technique using a hand plane. That removed my frustration and made it fun. Your tips about getting the length right was a big help, too.
Glad it helped!
This is absolutely exceptional work.
What a GENUINE pleasure to see this!
Thank you very much Mark.
Thanks Mike. I made my first Asa No Ha by hand with planes, saws, and chisels. I followed the Tashio Odate method. I especially like your jigs. I think I may upgrade my jigs now too. Thanks again.
Thank you. If you can make these by hand you are an accomplished woodworker. Well done you. Happy to hear you may have picked up a tip.
Excellent presentation and instruction Mike. I've made some kumiko in the past also, and I am going to remake a few of the jigs based on yours. Thanks for putting this together!
Thank you Guy. I took a look at your channel, impressive.
My daughter asked me to make her some kumikos.
I knew nothing about it and was wondering how to do it. Started to search around on youtube, but didn't find what I was looking for, untill this video.
Wonderfull tutorial, I now feel like I may be able to do it. At least I'll try :-)
Tks a lot for sharing you tips.
Thank you. Let me know how it goes.
@@MikeFarrington may I ask you what kind of wood you use for kumikos ? Maybe you say it at the beginning, but I'm not english and couldn't clearly understand what you said at this moment.
I did a 1st one with pear wood, I'm quite happy with it, but it was really hard to make thin 2 mm strips. I think I'll try a new one with a thickness of 3 mm.
@@astree214 I normally use maple, and basswood, but really anything will work. Something slightly softer is better. 3mm is easier for sure.
The Japanese lamp was cool indeed. I can't imagine doing all that with hand made tools only
Thank you. Yes, it would take a long time.
Precision in woodworking is a step by step process, and the best sequence produces the best results.
Thank you. I totally agree. One step leads to the next.
Wow never heard of Kumiko before. Very interesting . I appreciate your style of presentation. As layed back as the art itself.
Thank you Bryan.
Bonjour Mike
Quel travail de patience et de précision:
- les gabarits
- les pièces
Un grand, grand BRAVO !
Le résultat est... magnifique !...
Thank you very much.
I love your Kumiko videos. I would love to see the lamp.
I really liked your approach to making the jigs.
Thank you. I will get to work on a lamp build video.
Second that. Would LOVE to see the lamp video. Did you ever post that?
Its on the way. I am almost done with the build portion, then editing. Should be another couple weeks. Stay tuned.
Mike, that was amazing. Being a fairly decent hobbyist, I shudder at thinking of being that precise...But you’ve given me a good explanation and confidence! Yes, yes, yes on the lamp build! I’d love to adapt this to a useable piece. Thanks for your time and generosity!
haha I am SO not going to give this a try! but WOW! I have never heard of this before. It looks beautiful! Great job! I think the snowflakey looking ones in the last shot would make beautiful Christmas ornaments. haha.
I just had to comment and tell you that you are amazing!
Thank you. I have a couple snowflakey ones that hang from my Christmas tree when its up. At some point I need to sit down and make a bunch and try to sell them.
@@MikeFarrington Perhaps the Shop Apprentice ?
@@elan3studio765 Good idea, he can start paying his own way.
Very helpful instruction for beginning kumiko. Excellent editing with just enough information to clearly demonstrate each point, and no more. Great inspiration for me to begin this technique I’ve admired for years. Many thanks for your time and careful attention to producing this useful lesson.
Thank you very much. Give it a shot, let me know how it goes.
Really enjoyed watching this. Thank you!
My pleasure.
Ancient Technology
Hi Mike, i just made the kumiko jigs, the planing jig and the table saw jig for the grid. It turned out great ! A few very minor gaps. Im so chuffed with how the asa-no-ha turned out. A big thanks for taking the time to make the video . Cheers from Australia 👍
That is really great to hear. Thank you for sharing.
Holy shit.Sorry can't think of anything else to say.That is fantastic.Would love to try it but not sure I would live long enough to finish it.
Thank you John. I think you underestimate yourself. If you give it a try you will find it easier than it looks.
Lol
Right up there with the best kumiko instructions on the web. Thanks for putting it out there!
Thank you for the kind words.
Mike, this is really very cool and professional work, very useful video!! Thank you! Looking forward the next videos))) hello from Moscow)))
Thank you very much! I hope to visit Moscow one day and I hope its during the summer!
Thank you for taking the time to explain how to make the tools to do this. I have always been interested in Japanese woodworking skills like this and of course the Japanese joinery. I will for sure try this out when I get to the point of having my own home shop. Living in an apartment isn't fun when you are interested in woodworking.
Thank you. Let me know how it goes.
It's like that thing where you need a scissor to cut open a new scissor package. Lol
Ha! Thats not a fun position to be in.
Headed to the shop now to give it a try thanks for the detailed instruction made a difficult looking job easy!!
Glad it helped
God damn I love your work!
Thank you.
Excellent video!! Just like you I have a tremendous respect for those who can do it without power tools.. I will definitely try this.
Thank you. I hope one day to have enough free time to be able to teach myself that type of hand skill.
Excellent video! Looking forward to giving this a try soon. Can I ask, what brand/model block plane are you using in the video with the jigs? Thanks, and looking forward to more videos!
Thank you John. The block plane is a Lie Nielsen low angle adjustable mouth. Its costly, but worth it. Stay tuned, I have more videos in process.
Yes your method does work better than the original . My work is much more ease yer and a lot more accurate . Thank for your posting .
Thank you. That is great to hear.
I'll be listing this video in the bonus reference of tomorrows (2-18-18) WW'nTip-of-Day video. If you want to leave a comment informing people of anything you are working on I'll pin it to the top.
Thank you. Feel free to link to the video.
Patience of the zen master! Have built a few shoji door systems and ranma...still gathering the courage to move up to the challenge of asanoha-type kumikos, but your video helps make it attainable! Thank you!
Thank you. Give it a go.
First of all, thanks for sharing your knowledge.
Second, not sure if this was addressed, but try spraying some hair spray on the part of you Lie-Nielsen chisel handle that goes into the socket of the blade portion. Then firmly tap the butt end of the chisel handle into the socket. This should seat the handle well.
Thank you. Good tip.
Never heard of this woodworking art form before. The way that you have presented it is excellent. If this doesn't inspire people to have a go then I don't know. Upscaling for garden screens would be an idea. The lamp that you made is beautiful. Thanks for making the video.
Thank you very much.
Excellent video Mike! Every time I have seen these kinds of projects I have never thought I would be able to do something like this, but this video definitely gives me hope.
Thank you Josh, a few sharp tools is all it takes. Give it a go!
I got so absorbed I forgot what we were making. Amazed by your precision.
Thank you.
Wow, just came across this one and, having watched about a stupidillion different videoes, I honestly loved seeing someone finally showing a solid manual approach to woodworking. I love the, should I say, usual way to do things, but there is a soft spot in me for the more crafty manual way of doing things. Thank you for sharing, sir :-)
Thank you for watching, happy to hear you enjoyed my approach.
why do people need to watch anything but this to relax? beautiful. nice work, ill be making some jigs soon
Thank you very much.
Mike ... thats beautiful... kumiko is a great expression of ones patience, and you have shown that you are a very patient man !!
God bless to you & your family & thank you for making us (ME !!) a better carpenter .. and , I hope, a better person too....
From the Emerald Isle
😎👍☘️🍺
Very informative. Wanted to try but didn't know where to start. Thank you
Glad it was helpful!
I vote yes on the build video initiative. No glue on these, eh? Makes sense, but makes one wonder about the delicate nature of these. Hope it will survive the grandson. Great job again, Mike!
Thank you.
Very good video. Just been making jigs today for thin strips of wood. Like your jigs with the adjustment and mitres. Will make something similar to yours as they look really good. Thanks for your time. From over the pond on the north East coast England.
Thank you! Let me know how things turn out. England is beautiful.
You make it look really easy the trick of the master bravo
Thank you.
Best beginner video about jigs and overall instruction I have seen! This is definitely on my to do list! Thank you!!!
Thank you very much. Give it a go!
I have seen examples of this before but never actually how it is done. Fascinating to say the least and I did watch it all the way through so I will be having a go, will let you know how I get on. By the way one of the best presentations I have seen.
Thank you very much Dennis. I'd love to hear how it goes.
I am going to try this; great patience and techniques
Have fun!
No idea what you are doing, but i love it
Thank you.
when I was in the carpenter's union , my work started with historical restorations that needed hand tools . Later , I ran shop to keep the crews supplied in the field work of base housing contracts . The most satisfying works all involved 'hand tools' ,from Spiral Stair Cases to Hawaiian Koa Furniture . The shops were as big as acres in size under their roof . Now mostly puttering about happens on uneven ground , on the yard of home . 3 legged benches work great in this outside shop scene , they self-level .
There is a certain zen when using hand tools.
Absolutely stunning work. Excellent video, brilliant craftsmanship, fantastic explanations of all the steps involved. And modesty. Mike, I have to try this.
Thank you. Give it a try and let me know how it turns out.
Excellent video. Especially the section on making the thicknessing track/box. Thanks for making this.
Thank you Andrew.
Hi, Mike. Well, I finished my first Kumiko panel using your technique. Overall, I think it went pretty well with a few missteps. Planes: I had an old Stanley (my grandfather’s) which was too big. I bought 2 planes at HD ($8 and $12) and sharpened the heck out of them using sandpaper and an old 2-sided stone. Also bought a 1”x6”x4’ of Maple, a 2”x2” and a 1”x2” of Poplar. Took me 2 days to do the jigs and a full day to do the kumiko skeleton. Hardest part was getting the slats to the right thickness. I probably made 30 different pieces before I realized I could file out the kerf to get the pieces to fit. Today I put it together without too much trouble. I tried to use the little Buck plane, but the $12, 2” Buck plane worked way better. I was going to send you a picture but that doesn’t seem to be something I can do on CZcams. Mine does, however, look just like yours! 😎
BTW, I’m originally from Grand Junction, went to DU and CU and 5 years in the Springs while in the AF. You’re a lucky man to be able to live in Denver and get to do what you love.
Steve
Thank you for the feedback. Yes, Getting the slats to the right thickness is by far the hardest and most important part. Also, using a high quality plane makes the job a little easier, sounds like you were able to make the cost effective planes work. Staying sharp really helps. Happy to hear it turned out well. You can send pictures via my website email listed at the beginning of each video. Good to hear from another CO guy. It is a great place to live, especially in spring time.
@@MikeFarrington Do you see any issues with making a wider jig and use a jack plane instead of a block plane? I'm wanting to plane multiple slats at once.
@@zeppelin8806 Not at all. I have considered making a wider jig, I just haven't had the time.
Very nice piece of work. I think I might try it. You have an easy voice to listen to! And thanks for no music!
Thank you. Give it a go!
just spotted this, and must say it's very nicely done, and yes, I'll be giving this a try. There is a slight problem with not being able to show you the results. Thanks for the easy to follow instructions.
Thank you. Yes! Give it a go.
Best kumiko video out there !
Wow, thanks!
Bravo MIKE !
C'est SUPERBE de précision et de patience...
Et QUEL résultat !
J'adore...
Thank you very much.
You have the best woodworking channel by far on CZcams, and I’ve watched a shit-ton of different channels/videos. Thanks for the content!
Wow, thanks!
Brilliant workmanship
Thank you!
Exceptional presentation Mr Farrington. I can hardly throw a bandsaw box together. But even the jigs are inspirational. Alas, my ambition writes cheques my skills cant cash. one day..... one day...
Thank you very much. Its easier than it looks once you get going.
When I first saw these they were WAY out of my capability. Your video has brought them a lot closer, thanks for making the video and showing your jigs.
Thank you, that is really great to hear.
I’ve been making small boxes and looking for a nice way to add something to the lids. This is perfect! Thank you so much for the excellent video and taking the time to show how you make your jigs.
Agreed. Kumiko tops off a box nicely.
Mike Farrington Since you asked for comments......I’ve been having trouble figuring out the length for the 2nd pieces (67.5/22.5 degrees). The 45 degree ones are easier to size down but getting close on the middle ones is not very easy. Any tips? The rest of the video is great!
Yup, cut the 67.5 first, get that looking nice. Make sure the piece is long. Next move to the 22.5 jig. Set the stop long, cut the angle on two pieces and see that they don't come together in the middle nicely. Shorten the stop a little, check fit. Slowly you will see the pieces come together to a perfect fit. Cut all the pieces needed at this setting. Next flip the piece over, shorten the stop a little and cut the other side. Then work on the final piece. Hope this helps.
No heavy metal "music" no BS just art....thanks !
Thanks Mark.
Someone doesn't like Bobby Duke?
Though I have no desire to attempt this, I did enjoy watching your process from start to finish and found it to be both refreshing and relaxing. Very nicely done and thanks for sharing your methods.
Thank you. I fully realize that this type of woodworking is not for everyone. It is very specialized. Thank you for sharing your thoughts.
Beautiful work! And a very pleasant and relaxing watch as well
Thank you very much!
Excellent , I've wanted to try this, I learnt a lot from this video, I think I can now give it a go, thankyou
Thank you very much. Best of luck.
asa no ha.
asa =Linen (hemp)
no =of
ha =Leaf
asa no ha = leaf of Linen
Your Kumiko . It is so beautiful .
Good info. Thank you.
Awesome job, great video. Makes me believe I could do this. Great demonstrations, comprehensive instruction. Thank you!
Glad it was helpful!
I will not be attempting this. But I love watching you make it.
Thank you.
Holy moly Mike, that’s awesome! I have not heard of this before now and have great respect for what you achieved there. Despite having a full woodworking shop, I know this isn’t for me. Whilst having the strength (?) of perfectionism, otherwise known as a smattering of OCD, I’m also sabotaged by ADHD becoming easily distracted and excited by the next ..ooo, look! Yuh, that’s pretty much how it goes. ☺️
Sooo, I’ll stick to watching the master at work for now. Great video, thanks.
Ha, this is a really well written comment. Thank you. Stay tuned, more on the way.
wow....incredible art... wonderful accuracy and precision
thanks mike
Thank you.
Thank you very much! not only I understood how, but also I've got the will to try!
Thank you. Thats great to hear. Let me know how it turns out.
Do you have an Instagram?
I really like the simplicity of the jig method and your method for getting the hinge pieces to the right size. One thing I'm going to try doing in the future is changing the registration key into a piece of metal because the thin hardwood key is not very durable after several projects in my experience
That's a great idea!
Your method is great. The only thing I did differently was have two jigs for the 67.5 degree. One for the 1/3 and another for the 2/3 so there’s no need to move the stop.
Great tip!
Yes. a very pleasant video and inspiration to develop patience.
Thank you.
Kumiko is one of my favorite things to do in the shop. I use traditional Japanese hand tools and methods but it's interesting to see how power tools are incorporated. Really great video.
I especially like the way you make your jigs (rebate and and a shorter side). I finally wore mine out so I'm going to use that method for my new ones. If you are ever so inclined, pick up a small (~40mm wide blade) kanna. I find pulling the plane when using the jigs makes things a ton easier than pushing using a traditional western plane. The inexpensive ones found on Amazon are perfectly suited for this task
This great news. I have considered purchasing a cheap kanna off amazon just to play around. I think I'll give it a go. Thank you.
Outstanding presentation. Very clear and informative. Thank you.
Thank you.
Hey Mike,
Just ran across this....must've been meant to be as I'm getting ready to take the kumiko plunge for some door inserts.
My thing is furniture with a Japanese element in it, tansu etc using contrasting hardwoods.
If you haven't already, I'd love to see a vid about the andon you made. Kumiko in its western 90 degree form is called ships hatch. Huge heavy thick panels were made to cover cargo hold openings. Also as a retired cameraman/editor, your production quality is very good. Anyway, I gotta go make those jigs.
Domo arigato!
Just found your andon vid. Amazing what a channel search will turn up.
Thank you for the info, good stuff. If you check out my channel, I have a video on building two lanterns.
I would love to see more! Definitely build videos with the kumiko influence! Great work, you have inspired me to try my hand at kumiko! Thank you!
Go for it! Good luck. I will put together some more videos soon.
Awesome work Mike.. I was doing this with tongue depression sticks using my mitre on my sander.. early works resembled outcomes that appeared to be done by Homer Simpson.. but now I’ve worked thru most of my errors. Your method would be perfect to use as a inlay frame for a table top.. thanks for revealing the mystery of this art form.. keep it up..
I like the idea of tongue depression sticks.
They work great in my opinion. And they are fairly cheap at Walmart and Hobby Lobby.
I have started making a veneer from my patterns. I’ve been filling in the spaces with rare woods like red heart and walnut and even ebony. Using epoxy in lieu of wood glue, I can shave off a 2-3mm layer and make several pieces to use instead of just making tons of work pieces.
It's Amazing watching the Artisans who do this woodworking by hand in the traditional way and it is telling of your character that you pay homage to said artisans! Excellent vid Sir! Fun, Interesting, Crafty, Humorous (nailed it), well edited and Narrated!
11/10 :)
Thank you.
best youtube tip i ever got: Hairspray on socket chisels, works really well!
Yup thats a good tip, I do the same for motorcycle hand grips.
So , just for fun I bought a ton of pop sickle stick Nd have been doing various things .. because I like to do that sort of stuff, bird houses and cellphone holders Nd things of that nature , my nieces are coming to visit so I’m looking for cool uncle stuff to do with them and maybe get them interested in wood working , crafting , so I remembered this vid because I love it , you can guess where I’m going here, yup tried kumiko with popsicle sticks .. for an average person to look at it it came out looking interesting , but for the skilled person inside of me I was chuckling at myself , to skinny for stuff like this but I can already see the process Nd how pain staking it is to create anything like this , patience is defenatly a venture when doing this , which I have , but when you get to the point of the project ( don’t know if you ever have gotten to this point ) where you relive what your doing isn’t going well you kinda just finish for the sake of finishing knowing this is prolly summer bbq grill starter wood lol , much more respect for you lol , I’m getting a cam ASAP and starting a Chanel . And I’m goi no to tell everyone who doesn’t know about mike Farmington , you u better know ! Anyway you are an inspiration bro you know I been following you for a long time and will continue , thanks for wha you do. Have a great day ! Talk soon , would love to email you when I get all set up to maybe talk more in depth about creating vids and editing stuff if you wouldn’t mind , not really a big fan of posting my real email and stuff publicly but I don’t think you would attract the type of crowd who would spam me with a bunch of nonsense so maybe when the time comes I’ll post a throw away email and you could email me ? Anyway back to work .
Good luck with your channel. Its a lot of work, but also lots of fun. Keep me updated on how things going. Feel free to email me via my website.
Very impressed wit the great tuition will look forward to giving it a go. Love the Japanese style of woodworking.
Thank you Andy.
It's really awesome....! It looks so soothing to be able to do this. Love this video.
Thank you.
Very nice project. Loved the results. I will definitely try it out. I'm more into woodturning and this will add to my learned know how for future hobby projects. Excellent work! Thank you for sharing.
Thank you.
I love this video! It shows exactly what you need to make and how to s tart.
Thank you.
@@MikeFarrington And thank you! with this crazy going on these days, I can make all of these tools with cheap pallet wood and get started playing with it!
Great love it, Japanese wood work is one of my favored..
Thank you. Good stuff for sure.
Nice video. I’m gonna give this a try this winter sometime. Great instruction.
Good luck, I think you'll enjoy it.
Great video mate, thank you.
Really invaluable to have this information so clearly and concisely laid out.
Thank you. I do my best to make videos that are as clear and concise as possible.
The first thing which comes to mind is is you studied under Mr Miyagi and you mastered the art of Wax on -Wax off as the patience for something like this (by hand) is amazing! Suggestions you ask, its called a CNC (or CO2 Laser) or even a 3D printed version! I am going to give it a try and thanks for the inspiration! You do some amazing work Mike!
Thank you very much. I would be interested to see how accurately a CNC or laser could reproduce this. I don't know enough about them.
Surprised you you don't have a big 4x8 unit for all the cabinets you do. I designed up a version of the asa no ha in InkScape so I have an SVG of it (really couldn't find a copyright free version on the internet) and will post it on Thingiverse along with an STL file for free use.
I have considered a large CNC. In studying the time it would save me, I have come to the conclusion that I don't cut enough panels each month to make it worth while. I would love to see what you come up with.
You are a giant in the wood art
Thank you.
Nicely done, Mike. You do some beautiful work. Thanks for posting.
Thank you!
Great video Mike. Def something I'd like to tackle some day. You make it look easy... at least understandable.
Thank you. Give it a go!