How to Change Your Fork Oil - Fork Oil Change for Right Side Up Damping Rod Forks
Vložit
- čas přidán 12. 09. 2024
- In this video we'll show how to change your fork oil. This video specifically looks at the procedure for replacing fork oil in right side up forks that use damping rods.
Step by step written instructions will follow soon.
After watching several confusing half hour vids this one summed it up in 3mins.
A couple unorthodox techniques but I now am aware of the inner workings
Loosen damping rod bolt before you take out of bike ,it helps a lot , great video mate 👍
Do you also hose out your engine every time you change that oil too?
😆
water to clean out forks.. I don't think so
Oof
noob!its not water.its DEGREASER.its color just like water but its not water.you dont even know whats the use of degreaser.
No it is water listen to what he says degreaser and rinse out with water and turn upside down to dry ..it's very clear
You take that bolt out or loosen it when it's in the bike .
Loooll
running water through your forks is moronic
How come?
@@Travis-Antonissen rust
I also would not recomment that. Let them leak out.
@@LividAxis Rust? Buy a quality product.
You make it sound so easy. If that lower bolt has been in there a while, it will fight you the whole way and the spring will not hold the damping rod enough. You will need to fabricate a tool to hold the rod.
You really need to make it clear that a rear paddock stand is needed. Using a triple tree clamp stand without the paddock stand is never going to end well. I did see you use one in your video.
So you measure the level without the spring in?
Yes definitely mate .
thank you
i was trying to workout how to undo the bolt at the bottom.
I know this is nothing to do with the video but do you happen to have any instruction on how tighten the right switchgear please. I have tried to adjust the large screw under switch but it doesn't seam to be tightening so maybe its broke. can you please do a video on this as I haven't noticed one on CZcams.
The Allen bolt is not coming out how to remove it?
How many ml of oil to pour into a z400 into a fork???Thank you
Thanks for sharing. Nice advice.
What bike is this for
Haw to frount shoks upgrade for extra soft and jumping 10 inch
How often?
every 3000 miles
Honda aviator oil seal repairing
What's the blue liquid used for? What's the name?
i guess its called locktight. its like glue for bolts to make sure they stay on tight
@@stevenhiltunen6282 thanks mate, I found out some info and there are all kinds of grease to know, different functions.
Don't use the RED
@@stuartbear922 lol liquid weld 😂
Seems like you didn't need to remove the fork to do that
Hi bro
how many oil need to put in?
6 many oils
It's in your manual don't just put 125 in as mine is 115 yes it's only 10mm but it's not right . some have 95 ... check your manual
50 many oil
@@jimmycakes7158 much oil
How much oil in ml 200 or 250
Depends on the bike. Get a service manual. You can download one.
@@lundyracing thanks bro I find manual online you are the best
225ml
I felt dirty watching this...
TuthHurts911411 Don’t forget to pump your fork 😂
ur face is much dirty fyi
This was a train wreck,,