Video není dostupné.
Omlouváme se.

2018 Ford Explorer Cabin Air Filter Replacement - Hidden Glove Compartment Clip - Airflow Down!

Sdílet
Vložit
  • čas přidán 14. 08. 2024
  • After changing the filter in mt 2011 Taurus and seeing how dirty it was, I decided to also do it in my Explorer. When I went to remove the clove compartment door, I found that it was not easy to remove and had two hidden clips that needed to be popped out from underneath with a screwdriver!! One I figured that out, it was easy.
    ***NOTE - The airflow direction through the filter is DOWN. There are many videos that show the filter with the arrow pointing up...this is incorrect! The airflow is DOWN. I tested it to be sure.
    The filter I used can be found here and fits 2011-20 Ford Explorer and 2009-19 Taurus.
    PureFlow Cabin Air Filter PC4068X: amzn.to/3mT8tFp
    As an Amazon Associate, I earn from qualifying purchases
    Subscribe for more: / @krizakoni
    0:00 | Introduction
    0:22 | Description
    0:50 | Process
    1:12 | Clips
    2:45 | Filter Door
    3:54 | New Filter
    Gear I used in this video - As an Amazon Associate, I earn from qualifying purchases:
    My camera gear: Selfie Stick: amzn.to/3qd95qP
    Ultra-Pod: amzn.to/39qfhC6
    Anker PowerCore 20100mAh : amzn.to/2WdYtd8
    Anker PowerCore 13000: amzn.to/3gK2gIE
    Canon M50 Camera: amzn.to/341QKQM
    Rode Video Micro: amzn.to/3rudqW1
    Lens Polarizer Kit: amzn.to/2Ys0yCJ
    SIRUI 3T-35 Video Tripod (best camera selfie stick): amzn.to/2LA4Na6
    Cantina Blues - Take the Lead by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
    Source: incompetech.com...
    Artist: incompetech.com/
    #nosmallcreator #fordtaurus #diyrepairs

Komentáře • 28

  • @KrizAkoni
    @KrizAkoni  Před 3 lety +8

    ***NOTE - The airflow direction through the filter is DOWN. There are many videos that show the filter with the arrow pointing up...this is incorrect! The airflow is DOWN. I tested it to be sure...

  • @deniskholev8568
    @deniskholev8568 Před 18 dny +1

    Thank you! Great video

  • @antonjones9744
    @antonjones9744 Před rokem +2

    Thank you! Everyone is saying everything EXCEPT his to get these pins out. I guess their trucks don't have the pins reinstalled. Mine sure did because the box wouldn't drop down low enough to pull the filter. Again thank you sir. Happy 2023!

  • @jmrandom194
    @jmrandom194 Před 2 lety +2

    Great video and thanks for showing the detail on how to fully remove and reinsert the white tabs!

    • @KrizAkoni
      @KrizAkoni  Před 2 lety

      Thanks, I’m glad you found it useful! 🤓

  • @gnez28
    @gnez28 Před rokem

    Thanks for your video, I just fixed my glove box and replaced the cabin filter, just by following your video..great help.

  • @MrKickback104
    @MrKickback104 Před rokem +1

    You sir get a like and sub. You found out the easy method

  • @rickm1054
    @rickm1054 Před 9 měsíci +1

    Thanks for the detailed explanation & good video. Made it simple. Kinda

  • @hoborosser1785
    @hoborosser1785 Před 3 lety +3

    What was ford thinking its a bear to get those white clips back in. For the record you can leave them out.

    • @KrizAkoni
      @KrizAkoni  Před 3 lety

      I have no idea what they were thinking! Yes, thank you for pointing out that you can leave these out… 😎

    • @tonybarbieri2597
      @tonybarbieri2597 Před 2 lety +1

      @@KrizAkoni I was flipping out because one of mine is damage and was stuck in and the glove box part that attaches was cracked. my glove box was crooked and always wondered why lol. removed the stuck white plastic pin crap and it's better. thx

    • @Ron-h4l
      @Ron-h4l Před rokem

      Agree just change mine and the idiots send me the wrong filter size from Amazon

  • @richardross7219
    @richardross7219 Před 3 lety +1

    That looks easier than my 96 Taurus. I have to do a transmission filter change soon. Good Luck, Rick

    • @KrizAkoni
      @KrizAkoni  Před 3 lety +1

      Ew...dropping that pan is never any fun. 🧐

  • @zigarten
    @zigarten Před 2 lety +1

    I just unclipped the elastic from the right side. Released the “stops” to allow the door to drop and reached through. 15 minutes? Tops

    • @KrizAkoni
      @KrizAkoni  Před 2 lety

      Mine also only took a few minutes. Even with the elastic and stops released, the door on mine world not drop without pulling the pins. Thanks for commenting! 🤓

  • @SimplyCE3
    @SimplyCE3 Před rokem +1

    I am having hell getting the white tabs to line up. Is there a trick?

    • @KrizAkoni
      @KrizAkoni  Před rokem

      I had trouble as well…just keep at it and you’ll eventually get it back in.

    • @SimplyCE3
      @SimplyCE3 Před rokem +1

      @@KrizAkoni Thanks man. It is a piss poor design.

  • @HikeLife
    @HikeLife Před 3 lety +1

    Look at the amount of pollen. Oh my ...

    • @KrizAkoni
      @KrizAkoni  Před 3 lety +1

      You can almost shovel it here in Maryland, 🤣

  • @craigbetts1586
    @craigbetts1586 Před 3 lety +1

    good to change it did look dirty

    • @KrizAkoni
      @KrizAkoni  Před 3 lety

      After seeing the 1st one I had to do this one.