Traffic Signal Management and Control System based on density of vehicles and emergency vehicles
Vložit
- čas přidán 14. 08. 2021
- Thanks for watching, please do subscribe!!
watch full video carefully
hi every one, this video, will deal with a smart traffic management system utilizing sensor data, communication and automated algorithms is to be developed to keep traffic owing more smoothly. The aim is to optimally control the duration of green or red light for a specific traffic light at an intersection. The traffic signals should not ash the same stretch of green or red all the time, but should depend on the number of cars present. When traffic is heavy in one direction, the green lights should stay on longer; less traffic should mean the red lights should be on for longer time interval. This solution is expected to eliminate inefficiencies at intersections and minimize the cost of commuting and pollution.
Important instructions: 1. keep any object infront of ultrasonic sonir away atleast 20 cm far
2. after swiping rfid card wait for 30 seconds
3. check circuit connections carefully
Components Used
1. Solderless Breadboard
2. Arduino mega 2560
3. Arduino nano
4. HC SR04 Ultrasonic sensor 4 Nos
5. RFID RC522 module
6. RFID Tags 4 Nos
7. Red, Green, Orange, LED 4 Each
8. 220 Ohm Resistors 4Nos
9. Signal light Module PCB
10. 12V DC power supply
11. Connecing wires
OUR Other popular videos
1. How to make pcb board, studio.czcams.com/users/videoj142...
2. DC Motor Speed Control using Arduino and L298 with 3 Push buttons
• How To Make a DC Motor...
3. Arduino Robot car with Horn, Front & Back Lights using Arduino UNO
• How To Make Arduino Ro...
4. Automaterd #Car #Parking System Using #Arduino Uno R3
• Completly Explained Au...
5.IOT Based Smart+Automatic Irrigation System with Node MCU(ESP8266)
• IOT Based Smart+Automa...
hrbembedded & craft will make arduino projects and crafts uploads regularly
Subscribe us For More Videos
click for MEGA code :
drive.google.com/file/d/1bPkg...
click for Nano Code : drive.google.com/file/d/1rRoD...
click for circuit : drive.google.com/file/d/14wi5...
subscribe to my channel czcams.com/channels/sxt.html...
Follw on facebook : profile.php?...
Follow on Instagram : / bhadrappahr - Věda a technologie
Excellent explanation sir ❤
If i will substitute the ir sensor to ultrasonic that what changes i ll have to do in codes?
Hi
I need your help about traffic lights system
Osam 💥🤩sir
In place to Arduino mega. We can use ARDUINO nano. Or. Not. ?
1st view 😁
Why doesn't it classify the thread by image processing instead we have to swipe the rfid card then it has no effect, it's not automatic anymore
Sir which one install the library sir
The Ultrasonic is not reading I mean it cannot send To LED
nice project
but lack of mega
Peace be upon you, Professor. Thank you for your effort. I want to make your project for my graduation certificate, but I want both corresponding signals to work together😢😢
I didn't get
Is it possible to develop a project without an Arduino UNO and RFID Rc522?
Rfid is used as a switch, of course you can but mega is required to generate time to switch led's
what is the code for arduino nano? code_2 only uses the ultrasonic sensors
Did you get the code?
its available
@@hrbembedded_craftwhere is at sir
@@lekhanargowda8474 there is a link in description
hello sir I want to buy this project , Do you ship this ???
Hi, can i use arduino uno instead of arduino mega?
No, this project requires more no of input output than in arduino uno
Please code share kar do
can you please chare code
Arduino program
Bro im from iraq can i call you plase ?
I need a wiring diagram for this project's connection card.
Given in description
sir from where we can get these tiny cars,can u suggest any websites or anything .
Fancy stores
hi sir, can you provide the code for the serial communication between the arduino nano and the arduino mega?
thank you for suggestion i will upload new video for this
You don't use image processing to determine vehicle density?
No,
what if without emergency vehicles? does the code remain the same?
no need to remoove nano and RFID
Is this possible on 8051 microcontroller?
Yes of course
@@hrbembedded_craft ok thanks! ❤
Please share the code please because the one in the discription box is empty
Now u can try
@@hrbembedded_craft1:13
Sir. Cost of ARDUINO MEGA IS MORE ,,,CAN WE USE ARDUINO UNO in place of mega.....??
Mega because of no input output are more
Why do you use arduino nano although arduino mega have enough pins for RFID module?
Mega is works with round robin system, nano is used to give signal
Is TimerOne hardware needed to be installed before coding?
#include timerOne library is included in arduino boards
@@hrbembedded_craftwhat type of RFID cards did you use, the 125kHz or the 13.56MHz?
13.56 MHz
@@hrbembedded_craftthe lights are not switching, it only keeps the green light in one module and the rest are red, what should I do?
Please provide the code in another format. We are unable to open the code
Open with arduino ide
Hiw much wires used?
as shown in circuit diagram
The code is not working sir there's a problem about the LED and the sensor connection is not working and I think the code of the sensor is not connected to LED
Did you solve the problem?
Ya i too am having the same prblm did urs get resolved
Sir my ultrasonic sensors are not working
Check connection and supply
Hello sir
Hii can you upload tutorial of this project
Sir In codes there are so many mistakes can you correct the code because my project date I tomorrow
Can I know from Where u got the code
Source code is empty
sir how to contact you as i cannot contact you through the phone
Your phone number is not working
whattsapp 9036828801
Sir my ultrasonic sensors are not working
is the code okay ?
@@hrbembedded_craft
@@ritiksinghbisht1808 100% it is, remove any object infront of sensor 20cm away, or check connection
Sir can you please provide code for this project
link in discription
What will be the cost of this project if i wanted to make
Contact to WhatsUp no
Good work sir... Can you please share with me the code?
Check description
@@hrbembedded_craft sir please the code with RFID
Sir minimum cost kitna thak pada gayi ge
12K
Share code of this project pls
Given in description
how much for this project ....i want to buy it for $2000
U r fm?
Total price to make
13k
hi sir i want to do project how i cantact u
Check description
RFID not work nhi kar rha hai 30 seconds ka delay bhi nhi lag rha hai
same here
Please share code
CAN YOU PLEASE SHARE YOUR CODE SIR THIS IS A GREAT WORK
Check description
@@hrbembedded_craft there is no code in the description box
Sir plz send the this project code link sir
Given
can i get the whole code please
given
Bang butuh flowchart nyaa
Sir I have almost done this project but I have face compelling error
What I can do please tell me...?
Type of error ?
Can you shared the coad plzz
did you get code bro?
How to buy all these components sir...
May be near Electronics components store or amazon
hi sir , tum kahoge utna payment send Karu ga ,aap muje iska code de sakte ho ?
Contact me through phone
@@hrbembedded_craft please share your what's up no
aap ko code mila kya
@@nidhia3809 nahi
Share the code please
available in discription
Rfid sensor u have facked
No i have given 30 seconds time for each rfid card
@@hrbembedded_craft so a car comes near the sensor. The signal changes for next 30 seconds?
This code system works in round robin format
Any card you swipe it should complete one cycle
@@hrbembedded_crafthow to contact to you?
How do you Beg other people to help do your OWN project. ???
Do your own thing.
Pathetic.
Nothing is happening as itself, at least guidelines is required for students
please reply I already tried to connect with you on fb insta but not got into touch
Wattsapp no
I want contact you pls 🙏
Thank you, sir. I am a trainee and about to graduate. I will write it in my graduation project. Can you give me your email?
whattsup number is available