Can-Am Ryker Front Fender Sequential LED Reflectors
Vložit
- čas přidán 24. 07. 2024
- Ryker LED Front Fender Kits are available at SlingMods.com here: www.slingmods.com/canam-ryker...
Introducing our Ryker Front Fender Amber LED Reflector kit. These amber LED fender lights feature a DOT style reflectors, as well as a row of amber LED's that act as both daytime running lights and sequential turn signals. We like to keep things simple, so we've sourced OE style connectors for a true Plug N Play installation. In addition to the Amber Daytime Running Lights and Sequential Blinkers.. we've also designed a custom molded Red LED Reflector "Add On" Kit that mounts to the backside of the front fenders and replaces the silly sticker that comes from the factory. This add on LED kit illuminates as a RED LED daytime running light and also features a turn signal that runs in conjunction with the Amber LED kit on the topside of the fender. When purchasing the optional RED LED Kit, you'll receive a Plug N' Play 1:2 "Y" splitter that plugs directly into the Amber lighting kit for an easy and scalable upgrade that will drastically increase your likeliness of being seen while out on the open road! - Auta a dopravní prostředky
I got today the parts .. the complet set. Super delivery to belgium. Parts are super nice en compleet. Great shop❤
FYI for those doing this install. My Ryker 900 wiring of front lights was tucked into the fender and didn't allow me to pull them out enough to disconnect. I had to use a small screwdriver from underside of fender to hit the disconnect on the harness. After the lights were out of the fender i was able to pull the wiring thru the fender side to get more slack on it. If you pull to hard on the lights to get them out far enough to disconnect them you run the risk of breaking them like i did. My wiring pulled out of the harness on one side. I was able to put it back together but i got lucky with minimal damage.
This just happened to me today while installing the harness extensions for more less and lighting, idk what I can do now because it pulled out completely. My boyfriend is trying to get it figured out for me. My right side fender did perfect and works great with the new headlight but my left side pulled the pins out 😢
@@haleymoonan1323 did your wires pull out of the metal terminals or did the terminals pull out of the plastic connectors? It's been a while so I'm trying to remember your options. You can try getting a cheap soldering iron and connecting the wires back to the terminals. Might require stripping more of the wire to get metal on metal connection. If the terminals pulled out of the plastic like mine you can shove them back in all the way so the make connection with the other plug and super glue them in from the backside or just to wrapping with electrical tape.
@@mleachx1 they pulled out of the plastic connector with the metal terminals still attached to the wiring harness
@@mleachx1 my boyfriend tried repinning it and they’re not staying in or staying connected and my headlight and marker lights are not working
Great product. Got mine put on yesterday. I do most of my driving at night for work. These things are way brighter than you can tell in the video. Took me roughly 2 hours to install by myself. Thanks for the video
After several month's having these lights. I have never installed them until today. They look good but have a very small issue. One of the leds double face tape isn't sticking on the upper tip area. The area has been cleaned very well. I will be trying a few things to help. May have to renew the double side tape with 3m auto extreme tape if I have to. Also when I finished the install. The same led light didn't want to stay on. The turn signal worked but it wasn't staying on. I fixed that issue by making sure the wire was plugged in all the way. I must say though. These lights with the amber lights do bring out my ryker more. The brightness of these lights are amazing. I love them. Thanks guys. Next step is finding vinyl wrap for my ryker. The florida sun is toasting the hell out of my fenders....lol.
Installed mine today and I want to give some update/clarification. I have a late 2020 rally. After removing the fender there's a zip tie that holds the wire to the fender very tightly and very short. You're going to want to cut that to get some room to work, just replace later. I laid a towel over the A arm's and maneuvered the fender to get above the A arm and steering arm. The front turn signal doesn't just pull right out. The fender needs to be bent down in front and the front sides to release the tabs, then you can pull it out. I did not have enough slack in that TS wire to get to the plug because the wire was pinched between the inner and outer fender. I gently pried them apart until I could get enough wire to disconnect. My kit came with an OE style connector so there was no exposed prongs and shrink tubing, great! If you're doing the rear fender marker at the same time just go ahead and connect the splitter first so you don't have to fish the wires later.
Nice bright LEDs , nice!
Hey, Thanks for sharing Vincent. I'm sure your installation tips will be useful to others!
Wow! That looks dope. You guys just keep coming up with great stuff!
Thx William!
Just got ours, love them!
You guys are killing it for the ryker!!!!!👍 I cant wait to get mine so I can start modding it with all these awesome parts that I’m buying from you guys😁
EXACTLY my thought too!
Yeah killing my wallet have you seen their prices J.C!!!
Just what I need I order those yesterday
great company and clear instructions thank you all looks great i order all thanks
Mine are ordered :-) Can't wait!
Well I just submitted my pre order. I cant wait to get these in and installed.
Thanks for the support! You'll dig em'!
@@Slingmods I wish yall supplied the polymer pry tool with this kit.
@@fattywithafirearm We only have the metal ones on our site. Happy to throw one in for ya.. what's your order#?
Amazing... you're the best !!!
Thx Bryan.. glad you like em!
I like this!!!
Oh yes I am going to need that
Merci pour ses vidéos
Très intéressantes
Vous êtes les bienvenus, merci d'avoir regardé!
Ok so I installed the whole light kit yesterday it looks great but wasn't a fun install lol. The wires on the factory fender indicator are indeed short. However you can easily gain some slack by unraveling the wires from inner fender well and pushing them up into the opening for the turn signal recess. Making sure when your done tidy up the wires you disturb. (I assume if you have no slack your bike was put together correctly to factory spec, if you have excess slack you may have issues with tires making contact hence the recalls about this area from can-am. Don't be in a hurry, give yourself 3 to 4 hours and good luck👍🤙
Great feedback. Thank you!
Why go with the exposed pins and heat shrink instead of a matching male connector?
Darn the little splitters are missing from the package. Oh well. I emailed your support team. So far it took me 5 hours. with some interruptions. The hardest thing for my particular Ryker was to remove the front lights, very hard. Also it's cold today so the plastic tabs are very hard, they don't bend that easy. The left front light had very little wire so it took me a while to pull it out. Thank you again for the great video.
Valerio, oh dang! Our support team will take good care of you. Glad to hear you powered through it.
@@Slingmods Thank you so much. It ended up raining this weekend so hey I don't ride in the rain :). No time lost! Thank you for the response, on a Saturday, this is cool.
@@valerioventura Of course. 😁
@@Slingmods Just so everyone knows how quickly Slingmods responded to my issue. The parts left yesterday morning and will be here soon! :)
Parts arrived! Thank you. Looks awesome
Easy install...IF your wiring to the tip lights are long enough to pull out, which mine weren’t. I had a helluva time! Looks great though now that I am finished and took some Advil!
Lol. Glad you got it worked out Rick! I'm sure they look amazing.
With the wiring access... Can you install both these sets replacing the reflectors with the light kit that you already have out... The LED strip lighting for the inside of the fender? Is there enough connections to put them all together
Hey Dave, that has not been tested by us or the MFG and would not recommend that.
Thank you for the video, but a couple of things really need clarification. @3:55, my tabs under the light DO NOT come off that easily. I ended up almost breaking the plastic using the method you show here and scratched the top plastic. My tab was at the front of the light and can only be release with a FLATHEAD SCREWDRIVER. Second - there is NO SLACK in the wiring when pulling out the front light, so little slack that I ended up accidentally damaging and stripping the wiring from the housing trying to remove the light using your method @3:57. Not sure how much $$ that will be to replace.
will the reflector stucky goo side hold on a hot muggy day in florida hitting bumps?
Yes, it's 3M VHB tape. Just make sure to clean thoroughly and use the included adhesion promoter primer stick and install between 70-110 degrees.
Are you guys working on some lights for the rear of the bike? It needs a lot of love IMO
Yes, we are.. coming very soon!
Ok we got the lights that go under seat lights brakes and i don't see any video for that so i need help for them please. Thanks
Hello Kim, that video is on the production list and is not yet complete. Here is the written instructions for the "underseat lighting" strips: www.slingmods.com/pdf/can-am-ryker-underseat-running-turning-brake-light-strip.pdf
How about maybe coming out with the smoked version for the same bikes but also coming out with one for the slingshot
Hello Jason, we have a bunch of new lighting coming soon for the Slingshot including all new sequential lighting options! Stay tuned...
Can the red reflector light be wired to function just as a running light, but not as a turn signal?
Not without altering the power harness. The harness has been prewired to run as both a running light and turn signal.
Perhaps in the future you can make smoked versions of the reflectors
Hello Amrik, we will not be making a "smoked" version of these.. but there is Lens Tint, offered by Rust-Oleum... that would allow you to smoke em" out before you install them as a DIY project, if that interests you.
@@Slingmods exactly what I was going to suggest
I don't know if it's because I have a 2019 Ryker Ace, is it different than the 2020? Got the turn signal out a little further, still stuck on something. Maybe I'll give up and send the kit back.
Hello Robert, my apologies that you're experiencing issues with the installation. All the front fenders are the same on the Ryker's. We also have the 2019 model Ryker's here at the shop. The video should give you a pretty clear walk through of the installation process. You can also send pictures to our support team of where you're held up and we're happy to reach out to the MFG for further assistance. You can open a support ticket here: www.slingmods.com/index.php?route=information/contact
@@Slingmods Well I got the right one together but the left one is even harder. Even less wire to connect to and the connection has a loose wire I can't get at to solder it back on much less connect the y wire to. I'm going to see if I can get more wire pulled up somehow.
Do these also work along side the front an rear A-arm lights/turn signals?
Hello Chulo, yes they will. As long as you have our 1:2 Front Fender Power Harness here: www.slingmods.com/canam-ryker-front-fender-power-harness & our 1:4 splitter here: www.slingmods.com/canam-ryker-dual-color-led-expansion-kit-tricled Once those are both installed you can simply plug in the Front & Rear Facing A-Arm Strips.
I guess the rear indicators will be a problem for EU? (= orange blinkers) Or do you have a solution? :)
Can I install these and the Dual Color A-Arm Lights with no hassle?
Both of those will work on the same Ryker without issue! 👍
Will the new Fender Power Harness work with the Sequential LED Turn signals kit and the RED “add on” Reflectors LED turn signals? If so, how do you connect them both to the Fender Power Harness?
Yes it is compatible. The 1:2 fender power harness can pull power from the white tip light plug shown here: czcams.com/video/Lj9ErraMDPo/video.html
Thanks. Which one do you connect first to the white tip light plug, the splitter from the power Harness or the harness from the Sequential LED kit.
@@rykerryd3r59 It doesn't matter. You're just tapping power off the white tip light for both mods.
Thank you. I will purchase the new Fender Power Harness and the Sequential LED Turn signals kit with the RED “add on” Reflectors LED turn signals so I don’t have to purchase the Replacement Amber Reflectors. I also have the Front Fender Running Light Strips and the Front Grille LED Running Lights. I need to connect all 4 Lighting mods to the Fender Power Harness. Is this doable?
@@rykerryd3r59 Yes it is.. but you will need our 1:4 power splitter here: www.slingmods.com/canam-ryker-dual-color-led-expansion-kit-tricled since you're running more than one lighting mod.
Can these be fitted as well as the split colour fender LEDs on the same bike..?
Yes absolutely.
@@Slingmods sweet appreciate the reply 👍🏼
How long approximately does this take?
Hello Shelia, I'd allow a few hours for installation on these. Thank you!
Put them on then I got 2 miles from my house and all the sudden vvs fault died on me . Why is that?
Hello Drew, please contact our customer service team here: www.slingmods.com/index.php?route=information/contact so we can work to diagnose the issue for you. Thank you!
could you use the red ones on the rear fender?
Really good question!!!! I want to be able to do that too👍
We have a rear fender light coming next month! Stay tuned!
What is the "primary tube" ?
Hello David, not 100% sure what you mean by that?
Hey guys, when are going to be back in stock?
Hello Petr123, these actually sell faster than we can make them. We're getting in batches every few weeks.. but it's generally just enough to fulfill back orders. I'd highly encourage a pre-order if you'd like these as we ship in the order received. Thank you!
Great product however the installation is not as easy as made seem. Once removing the tip light the wiring does not have as much slack as it appears in the video be very careful when removing so that you do not pull apart any electrical wiring
My chaser light will not turn off ?
Did you get the problem resolved woffordadam?
Yes thanks Slingmods and Triled helped very much they work great now
Hola podría suminitrame un juego luces como esa para mi rt sea-to-sky del 2023
Gracias
Sí, están disponibles aquí: www.slingmods.com/canam-spyder-secuencial-front-fender-led-reflectors-spyderfenderz-tricled-2019-up
I ordered these for my wife ryker in May and they're still on backorder 😭
Yes sir, regretfully. We do have a shipment on the way. Hopefully it's enough to clear out all the back orders. Apologies for the delay on this one. This is an overseas product and the importation of goods since COVID has been unbelievably delayed. We will ship in the order received. Thanks for your patience.
@@Slingmods thanks for the update.
@@johnnyh1948 Sure thing.
These are far from plug’n’play on the Oz version of the Ryker. If you have the ‘eyeball’ lights and indicator stalks there needs to be wiring mods done in a main harness.
Make the amber light clear and it would create a bigger footprint at night.
True but the amber light would be good if there is fog or bad rain👍
It's extremely bright.. the video does not do it justice. We also went amber as most states require an "amber" turn signal.
These LEDs are super bright a must have, check my Ryker channel
I don’t know why I have to tell a parts business that it is COMPLETELY UNACCEPTABLE to send out a replacement part ordered Monday to arrive A WEEK LATER the following Monday. The original item itself arrived in a fraction of the time. This makes ZERO SENSE. Why do I have to suffer because of an inferior connector sent with the sequential led ryker kit? Does anyone at slingmods care or do you enjoy trying to frustrate customers with their bikes in pieces over a week due to a faulty wiring harness. Not cool.
I can understand your frustration. So that you know.. we don't make the product, nor do we have individual parts. We sell the product in "completed kits" that are normally "not" faulty. When an issue arises we have to contact the MFG on your behalf to get you taken care of. If you submitted a ticket with us or have spoken with one of our customer service reps.. I can assure you that the problem is being resolved. The MFG of this product is TricLED and was at Daytona Bike Week last week and is currently playing catch up this week. I'd guess that's where the delay may be in your replacement part.. but it will be handled. We are a customer service based business.. but unfortunately we live in a perfectly, imperfect world. All we can do is work to fix a problem, when a problem occurs. Thanks for your patience!
Very complicated... too much modification... ..
Yeah Rich.. it's a bit more involved than some other mods.. that's why we created the video. 😁