Tips and tricks - CHEAPEST Airless - Vevor x6 similar to Graco magnum x5
Vložit
- čas přidán 30. 06. 2024
- Coupon code VVMH5%OFF
SPRAY RIG From VEVOR DEAL s.vevor.com/bfQOrw
50ft spray line and extra gun not a bad deal s.vevor.com/bfQPug
Filters Used in this video amzn.to/4cFr40a
Pickup tube that could probably be modified to use on this Vevor airless unit amzn.to/3zsaumj
Tip filter for cone filter housing amzn.to/4cpkNWT
Cone filter housing amzn.to/3L72BFj
Graco white washers amzn.to/3zr4dao
11/16 flat tip housing amzn.to/3W3Xoo8
11/16 to 7/8 adapters for cone filter and reversa tip
11/16 reversa tip gaurd (no adapter needed) amzn.to/4clZBkv
Bedford flat tips amzn.to/4eJSRyq - Auta a dopravní prostředky
paintsprayersunlimited.com/ if you want all these parts cheaper. it is a bit hard to navigate but they have all the parts I listed on amazon much cheaper.
Vevor was incredibly supportive and helpful to me. When I opened the box I found they had gone out of their way to place not 1 but 2 PERMANENT kinks in the pick-up tube. Instead of packing the tube in a coil, they packed it in an S and made sure to stuff it down as hard as they could. What came out of the box was a Z shape.
Thanks, Vevor. I feel special. Mike only got 1 kink.
OK, getting serious, thanks, Mike. This is my first venture into airless; got a new length of picket fence and 130' to paint. Both sides. You not only saved me money on DIY but also gave me the tips to fix the shortcomings. Much appreciated. Next up; pergola and deck, then the neighborhood and beyond! 🤓
Thanks Mike great video I was going to roll it but now I will spray !!
I have a Graco X5. The same pump as this Vevor. I cannot believe how long it has lasted me. I kid you not I've done atleast 20 full exteriors. Stained an insane amount of fences for a bunch of duplexes back to back. Painted several boat docks, I've even sprayed several sets of cabinets, the entire exterior and interior of my personal house. It is still working like a charm. I truly can't believe it. I also run 75 ft of hose on it which the guy at Sherwin who sold it to me said was too much hose lol.
for 150 you cant go wrong with this one.
@@mikethepainter no joke
Mike I kid you not, that thing is a work horse, people sleep on these pumps
Excelente video y muy bien explicando.
Tengo un Vevor igual,he visto gente que lo limpia con amoniaco diluido en agua por el circuito, que le parece?
Yo lo limpio con agua
Que tal te salió el vevor x6 acabo de comprar uno por q tengo q pintar unas bardas espero q si jale bien 😅
Unfortunately i cant buy the flat tips in europe. Would have been great! Great mod.
Let me know if those links I put in the video work in Europe. I have no way of knowing.
In Canada a guy was saying he could not get them either and finally was able to get them there. They are the old way and are probably available somewhere.
I tried the links but they don't work. Unfortunately. In the booth i spray with hvlp and air assisted with the g40 gun flat tips also. So your setup would have been nice for jobs on location. But I'll have to stick with airless or my hvlp turbine. Somehow i just like the airless setup more for location work.