Teach Me, GP2040-CE! Updating Haute42 Products to GP2040-CE 0.7.6
Vložit
- čas přidán 10. 01. 2024
- In this episode of Teach Me, GP2040-CE I'll show you how to upgrade the Haute42 products (G, T, S, M, and Mini series) to 0.7.6 from previous 0.7.x versions. You'll just need a USB cable that supports data (not just charge).
UPDATE: You can go from 0.7.5 and previous to 0.7.7, just replace the 0.7.6 references in this video with 0.7.7. If you updated to 0.7.6, you shouldn't need to flash nuke; just flash the Haute42 variant of 0.7.7 over 0.7.6.
NOTE: DO NOT connect your Haute42 product to your computer via the USB-A port! Only use the USB-C port. For the G-Series, only use ONE of the USB-C ports, never both.
GP2040-CE Releases page: github.com/OpenStickCommunity...
Haute42: www.haute42.com - Hry
![[Prism] Setup / Getting Started](http://i.ytimg.com/vi/yLihKsd3h_s/mqdefault.jpg)
UPDATE: There's a newer video that covers upgrading to 0.7.8! Check my channel.
Hi all, I'm glad folks are finding this walkthrough useful. Stay tuned for more Teach Me, GP2040-CE! episodes.
Some things I missed:
A little commentary on the Mini, since it doesn't have LEDs or the status screen: The only way you can tell that you're in webconfig mode is to try going to 192.168.7.1 in your web browser; if it loads, then you're in webconfig mode. Similarly, the way to confirm you're in Bootsel mode is to see if the RPI-RP2 drive is present.
Any series (really, any GP2040-CE product): If you go into webconfig mode and 192.168.7.1 won't load, you may have some security software blocking access to local web addresses (or your network uses 192.168.7.* and it may be already taken elsewhere). In that case, you'll need to allow an exception (or temporarily disable this). Also, make sure you're not entering before it (it's plain ).
Also, I've been doing review videos for a partner channel, website at: thearcadestick.com/
hi 1-how to map one button to do macros ? 2- how to switch and map the extra buttons on top or bottom to do drive parry or drive rush ?
Hi Zaveros! Since you have the T16 as well. Is there any way in the web configurator to set the L3. and Up buttons that do not appear on the 'stickless' layout of the LED customizer? I cannot find a way to. This would be the WASD W/up, and the button directly left of the stickless Up. Thanks in advance!
@@leviathenx7531 I don't think they appear in the current firmware; they're supposed to show up in future releases though.
@@Zevaeros My haute 42 S16 won’t cut on anymore I did it all wrong I downloaded the files and then straight up tried to drop them into the RP1-RP2 and it kept automatically disconnecting my haute 42 s16 from my Mac laptop every time I tried dropping the files in it and my laptop kept saying that I’m unplugging it wrong and so I kept trying and eventually my haute 42 s16 stopped working it’s not cutting on when I plug it into my laptop anymore and the lights won’t cut on either is there any way I can fix this ?
@@DarthZuk See my newer video on how to upgrade to 0.7.8; use the flash nuke method described there. The S16 should have a pinhole on the back you can stick something in to press while you plug in to get it into bootsel mode, then flash nuke, then use the H42-Cosmox firmware variant.
If that doesn't work, jump on the Haute42 Discord and post a support thread.
Thank you for making this video. I had a bunch of anxiety before watching this, but you made the whole experience stress free.
OMG！ I just found this from discord group， I did't notice that you did an amazing work about this!!Thanks so much,buddy,this video is far more intuitive than the thred I post，haha
Wats their disorder
Have a T13 and G13 arriving tomorrow and have been dreading doing the updates. Thank you so much for this. Perfectly clear 👍🏻👍🏻👍🏻
Love to see more GP2040-CE tutorial content! This video is very simple and clear, I will point my customers your way if I get questions on firmware updates :)
Sure thing. This is the first in a series I'm planning on doing, sort of a "pilot episode".
Got my G16 Today and THIS video was EXCATLY what i was looking for! Here Take my sub!
yooo you fixed my board w this video thanks a mil def subbing to this guy!
Thank you, I got the g16 as my first hitbox style controller ever. This was helpful.
I got the firmware on my brother's Haute42 Mini upgraded, thank you!! Now I can order another one for my sis.
pfffff what a GOAT .... such a good video , clear and very understandable even for none english speaking ! thanks boss
thank you for pronouncing "haute" correctly. Not a single other video i've seen has been able to accomplish this monumental feat.
I have a review video in the works and I wanted to get it right 😆
Great vid. Just got a 42 M series today and needed help updating. this outlined it perfectly. Now I just need to reassign buttons better. thanks again.
Sure thing. I have a video on how to remap buttons out there as well.
nice and thorough explanation
Thanks for the content man
Thank you ! Really nice guide !
This was a huge help getting the firmware on my Haute Board Mini upgraded.Thanks for this!
awesome video! thanks for the help!
Is there any chance you could make a brief tutorial on the Haute42 G13 series LED parameters and it’s functions indicated by the manual? I struggle finding elaborate information about the leds on those pads and how the functions on those pads work!
Either way thanks so much for this informative video I feel way more confident updating and moving stuff around now!
Thanks for the video sir. 👍👍👍👍👍
thank you so much!
thank you!
Thank you.
easy peasy thanks!
thank you
Subbed.
god bless you
Hi Zevaeros, great video, keep them coming. I have the Haute42 T16. It's configured to stickless mode. How do you get the 4 additional buttons to light up? In webconfig it doesn't show those additional buttons so I cannot assign an LED . I have updated to version 0.77 firmware. Also the display doesn't show the additional buttons either.
For getting the other LEDs to work: Enable custom LED layout, then try assigning LED colors to the option buttons. I forget exactly what does what (touchpad is something?) but they will let you light up the extra L3 and the extra up. I predict the custom LED setup will change in the near future.
For the status display, the main 0.7.7 currently doesn't support these right now -- there is a custom variant available on the H42 Discord that should add the extended display.
Thanks will try that, really appreciate your feedback!!!
Do you have video that fixes 8 min connectivity issues when connected to PS5? Thanks for the awesome videos and cool stuff.
Not...yet but it's in the works. I plan to cover all the ways to connect (built-in, in-line adapters, passthrough, and PS4 files method).
@@Zevaeros excited for that video. Thanks for all the good work your doing.
THANKS BRO
@zevaeros could you make a guide on how to edit the display? For example I remapped my rb lb buttons but the stock input display still shows button presses as they were prior to remapping , how would I flip the rb lb on the display
really cool video, helped a lot. thank you! i have the haute42 m16 and my custom LED is not working at all. any idea what i could be doing wrong?
Just to confirm, do you mean the green status LED, your button LED settings, or the little status display?
custom button led's. for every single button in a custom colour in each state (std and pressed)
@@senX Hm. I've found that trying to restore that sometimes doesn't work right - not sure if it's a known issue for 0.7.7 to 0.7.8 right now.
Sanity check the custom RGB feature is turned on in add-ons first. You may need to use the hotkey to cycle through color themes to get it to work after that. gp2040-ce.info/rgb-leds/
Your the best dude wow lol
where did you get your cord? mine came with the cheap white one or can I purchase any usb-c to usb-a cord and itll work?
You can use any USB C to C or A to C cable as long as it supports data transfer. Usually I'll get C-to-C and some C-to-A adapters. Amazon and AliExpress are generally where I go.
Hi. I just got my T16. Would you have a guide on how to map buttons? I'm totally new at this and I find resources online a bit hard to understand. Thanks
I'll definitely add it to the list and I've noticed others on the H42 Discord keep having that issue too.
@@Zevaeros You are a god sir!!! Will definitely wait up for it
I just got my haute 42 S16 and I think I broke it or something it won’t turn on anymore every time I try to plug it in the lights won’t cut on at all
hi 1-how to map one button to do macros ? 2- how to switch and map the extra buttons on top or bottom to do drive parry or drive rush ?
See my remapping buttons tutorial: czcams.com/video/yn4zcgG8VxA/video.html
W
I reach the part when I connect the hitbox on bootsel and then see the page of 192.168.7.1, but once i'm there it doesn't show me anything on the explorer file, when it's supposed to be the old drives of the hitbox. I don't know what's the problem.
I released a newer guide that goes into more detail for updating to 0.7.8; check that.
If I import my PS4 key, PEM, and signature files in 0.7.5. Do I need to reupload them again after I update to 0.7.6?
As you need to flash nuke which will clear everything, I'd assume you'll need to reimport those key files.
Man even after watching this, I think my mini is bricked. It won’t let me go to the link page, it won’t do anything. I could be missing something but I broke down and bought a Junkfood micro. I have to say the micro is way easier to manage. Still I want my haute mini to work!
The H42s should have a bootsel button in the back; use that to flash nuke, then load the Haute42 variant of GP2040-CE.
Mine was a lemon. Got it switched out for a couple different Haute 42’s can’t beat em for that price
Why does my pin mapping screen looks different. Its more simple and i do not have all the pins. Do i need an update or something
Go to the Home tab to see what version you have loaded.
I followed the steps but my G16 is now stuck on splash screen, I can get into webconfig mode but can't use the controller, it stays on HAUTE42 with the buttons in red
OMG this completely bricked my G16, now the screen won't even turn on. I did just as the video said, and I tried two times (nuked then install fw). I tried going from 0.7.4 to 0.7.7. I had the same result twice (stuck on splash screen when booting in controller mode). Then I went into webconfig and tried nuking and reverting to 0.7.5 (with the old non-haute specific fw), but that made it froze and now it won't turn on, no drive appears when pressing the physical boot button on the device and connecting.
EDIT: I completely panicked lol, I tried with a different computer and I was able to do it pressing the physical boot button and nuking and using the 0.7.7 fw. I may have had issues because I was using a Macbook first, with a USB-A to USB-C adapter, maybe using adapters can mess with the process, just be careful, I used another Mac that had native USB-A input.
@@MVergaraQ OK, phew. I had heard that some H42s had some issue that was similar, but glad you got it to work.
just got my new g16 and holding start seems to do nothing which is weird, the start button works when im in a game
Sanity check: The controller should be unplugged as you hold start. Keep holding start as you plug it in. You're doing this, right?
@Zevaeros I realised this yes, it works now!
My leds light and oled screen don’t work anymore after I hit danger zone a day ago.
If you go through the nuke to flash process again it should restore default settings.
Hey, do You know why mine does not turn on the rgb and the little screen, it works fine but it usted to have those features
What model? What firmware do you have on there now? Did you try flashing already or did it just stop working?
@@Zevaeros i got the 0.7.7 and o flash it already but the screen and rgb still don't work
@@LuisLoquendo. Come over to the Haute42 Discord and check the support threads. This may just need a re-nuke and flash. discord.gg/838mnGgq (good for 7 days)
is it compatible for sky 2040 i lost my control button in tekken8
If it uses GP2040-CE then it should. Check to see if the manufacturer has their own variant and instructions for updating.
Is drag and drop the same as copy and pasting the file?
Yes, either way will work.
does it have too be turned on for the boot mode button ?
See 8:05 - 8:42 for how to use that. Hold the button, then plug it in, and you'll be in Bootsel mode.
@@Zevaeros oh i see thanks
the web config is not loading for me even after holding start and plugging into my PC
Sanity check a few things:
1. The controller boots and connects in regular controller mode
2. The start button works in regular mode
If #1 fails, try different cables and PC ports. If #2 fails, you either remapped start or it may not be working. In Windows, use joy.cpl to make sure things are working.
@@Zevaeros thank you! That works for me
@@Dtzeo503 Okay, if both work, that's good.
Next sanity check, are you holding Start as you plug in? (you seemed to indicate yes) When you do this, what does your status screen (on the controller) show?
If you open a command prompt and use ipconfig, does your IPv4 address start with 192.168.7?
Can anyone help me out, I did everything like u did, and my t13 just doesnt turn on
OK, let's sanity check:
1. Do you have a known good cable that supports data transfer?
2. Can you get into Bootsel mode (use the button method) and see the RPI-RP2 drive?
If you can get the bootsel mode to work you can flash nuke and then use the 0.7.8 Haute42-COSMOX variant to flash.
the lights dont even turn on when I connect the cable but I hear the sound connecting to the pc
@@joaofonseca6228 that's fine for bootsel mode. Do you have the 0.7.8 flash nuke and Haute42-COSMOX firmware downloaded?
@@Zevaeros I went to the discord and someone helped me, but thanks for the help
@@joaofonseca6228 Alright, good to know it wasn't toast.
Where can I purchase these boards?
Amazon and AliExpress carry them.
what if the website does not open?
First, make sure you're actually getting into webconfig mode (the display should tell you).
Second, make sure your network isn't using 192.168.7.* (otherwise you may need to disconnect first).
Next, make sure no security software is preventing you from loading local websites.
The website didn't load up for me
Are you using Windows, Mac, or Linux?
but how do i download the app to begin with
Download what app?
@@Zevaeros never mind I found out it was on the web and not a downloadable app
The ip link isnt working for me.
Make sure you are in webconfig mode and using 192.168.7.1 (https often gets inserted)
@@Zevaeros Their USB-C was the problem I just switched the cable and it worked.
How to connect it to ps5?
I'm working on that as my next video, but you'll want to get a Magicboots for PS4 1.1. Plug that into your USB-A port and toggle to PS4 mode, then you should be set.
Hey whats up. so mine is showing Current: v0.7.7-5-gf220e54-dirty and I see Latest: v0.7.8. where can I find this version? the website only shows "Choose this version：GP2040-CE_0.7.7_Haute42.uf2"
Appreciate the step by step in the video :)
Website is a little behind; get
GP2040-CE_0.7.8_Haute42COSMOX.uf2 from the releases page.
I have a newer video on upgrading to 0.7.8 that is probably a little more detailed. The "dirty" version was included with shipped units and you can use the fast method to upgrade to 0.7.8.
thank you
Hi. I just got my T16. Would you have a guide on how to map buttons? I'm totally new at this and I find resources online a bit hard to understand. Thanks
Coming very soon...
Hi, Im having problems, I updated my controller to 0.7.7 and after I dragged the file the explorer automatically closed and my controller display isnt showing, any help?
Redownload the flash nuke and GP2040 for Haute42 files (possibly try another directory, you may want to do a disk scan). Use the bootsel button and try flash nuking then updating again.
File explorer will usually close if you select a drive that gets disconnected, so if you don't drag and drop that's normal behavior.