Programming High Feed End Mills: In The Loupe TV Ep. 6
Vložit
- čas přidán 8. 09. 2022
- As a follow-up to In The Loupe TV episode 5, Don Grandt takes a deeper dive into programming and optimizing your Helical Solutions High Feed End Mills. Learn how to fully optimize your high feed end mill to get the best possible performance from your tool. Join the Cutting Tool Counselor in episode 6 of In The Loupe TV to learn more about High Feed End Mills!
Episode 5: • Introduction To High F...
In The Loupe Blog: www.harveyperformance.com/in-...
Harvey Performance Company: www.harveyperformance.com/
Harvey Tool: www.harveytool.com/
Helical Solutions: www.helicaltool.com/
Micro 100: www.micro100.com/
Titan USA: www.titancuttingtools.com/
CoreHog: corehog.com/
Great video
Much appreciated, ctc
Butter on a cat? Lands on its side, but in the toaster of course.
🤣
Great video. I use mastercam and use dynamic as much as possible with hem cutters. Sometimes i use dynamic with high feeds, im aware of cutting air, sometimes just cuts great when other conditions exist. When high feed milling i try to stick to simple contouring, area mill, helical ramping and pocketing with true spiral. Spiral does cut a little air if you are picking out corners but it is very smooth.
Thanks for the tip. I will have to try the True spiral path. Ctc
Thanks
I never take Spring Passes. It Dulls the Endmill.
In a real cam system, IE: Siemens NX, you can define this tool exactly. No compromise
That is great to know David..
The profiles and tool libraries for these are available on Helical's site, no defining needed. I was surprised to see this wasn't mentioned in the video.
@@ugccrawl6850 You are correct, we do carry SIM Files ( DXF) for all of our tools that can be downloaded and used for programming. Great comment and insight UGC!
NX is the best. Mastercam has a lot of problem with feed mill simulations.