The ULTIMATE Manual Transmission. Tick Performance builds a dream T56 Magnum
Vložit
- čas přidán 2. 05. 2024
- Massive thanks to all the guys at Tick Performance for making this possible. This transmission is what we all dream of. Flat shifting, straight cut teeth screaming, all out racing. The gearset, shifter and gear selector in it is from PPG and features a 1:1 6th gear. So its built to party hard
T-Shirts: www.dahmracing.com/collection...
Patreon for Build Videos: bit.ly/2koiw8G
Instagram: bit.ly/RobDahmIG
Subscribe to Rob Dahm: bit.ly/1OAN9yi
AWD 4 Rotor Video Series: bit.ly/2QiFduE
Music:
------------------------------
Summer Rain by Filo Starquez / filo-starquez
Creative Commons - Attribution - NoDerivs 3.0 Unported - CC BY-ND 3.0
Free Download / Stream: bit.ly/3Plx7Ok
Music promoted by Audio Library bit.ly/3PJWUQD
------------------------------ - Auta a dopravní prostředky
This arc of the channel is like.. when you're playing an MMO and your alt becomes your main.. then you end up learning the game from a whole new perspective and when you finally go back to your main, you're a completely different animal.
Could also be like when you go New Game + if you think about it. He has ALL the assets of his previous win, now, he's starting the game again with all the nice weapons, all his achievements, all his points and he's given extra points to put into newly unlocked stats.
Nerd
Perfect analogy considering Rob was a fellow WoW nerd, probably had a few Alts turn into mains in his day
You lost me at "being a virgin" lmao jk
reddit tier comment
Bro went into the bathroom with ear protection... It's not even Taco Tuesday
Yea but it was a girls bathroom.
Rob Dahm would make a bad ass Wolverine
Somebody get this guy in Disney's think department
Lollll facts
Until hes fighting someone and stops cus he sees a cool car and starts nerding out about it lol
Hes is from Michigan, home of the wolverine
Rob: "This is the ultimate T56 sequential."
Joel: "Smells good!"
😂😂😁😁😂😂
Ngl for a second I thought Rob got sponsored by a door handle company 😂😂😂 I was like what a random sponsor
I almost thought the same, then I realized I seen it on Instagram 1st 😂
@@dubiousf00d I’m just glad I wasn’t the only one lmao
We run a Tick Performance TR6060 in our small tire Z32 and it has been an amazing unit for the last 4 years. Can't go wrong with Tick 🤘🔥
How did u win it raffle giveaway? U have a channel or ig w ur content. Wud love to see the Z32….
@@BigDipper907 No, it was purchased. My late father & I started the build in 2015 & I've steadily upgraded it since. We do a lot of street work up here in the northeast so I don't really like putting it out there too much. Seen a lot of guys get burned with reckless posts. Tho I've been asked to start a channel numerous times lol. Almost every Import Faceoff or Import V Domestic I go to I get that comment.
@@jdmmike7225 oh misread I thought it said won lol. Def bet it’s fun. Yea I get that tho for sure. Especially these days lately smh. I used to have a 84 z31 n/a then a 85 turbo. They were fun but soo many electrical problems especially up here in Alaska w all the snow
I'm an old guy who does not wrench and never has.I am not built that way but I love watching you throughout the years and your progress
When you hear that accent, you know that they know everything about going fast.
Literally my first thought haha
I love seeing all the different sides of the automotive industry coming together to help rob accomplish a very tough goal of getting a car ready for pike's peak, the support shows and we are all here to see you run up that mountain!
Our prayers be with you on your run, for safety, for good conditions, for a great experience, and good times ...
That is one of the best endings that I have seen on this channel!
It’s one of the only real endings on this channel.
@@flabreque No more blue balls...
That transmission is worth more than both of my project cars…I’m jealous
Don't be man. Be happy for papa Dahm. Not like you could've used it properly even if you had it. Not unless you plan to do exactly what he's doing. Which is what... a fraction of a fraction of the car world. He's the nutty guy we all follow to see where the limit is.
Tick is a great company and their parts are well thought out. Customer service is one of the best in the small space of manual transmissions. Well done Rob having them on your video!
Nice bathroom sign.. lol.
Love the Australian products PPG for the win 🏆
Imagine if Americans did that?
“I love pulling a long rod” 😂 8:00
I learn so much from Rob's videos, the signal to noise ratio on his content is stunning.
My thanks to you and your team.
straight cut gears, barrel selector. strain gauge linkage, gear indicator - all normal (performance) motorbike stuff!
Lol I know that's all stuff I got on my kawasaki or ktm
except on a bike its a real sequential. Dog rings.
Motorbikes won't be making 600+ lb-ft of torque LOL
My Triumph has it too.
@@spdcrzy Yeah, because you don't need it. That's kinda like having your boots on while getting in bed. Besides, a stock haya with proper tires and a good rider will outrun a car even at those torque levels. So... torque means nothing in the bike world.
💪🏿 another reason why manual transmissions will always to me be superior.
Nice buy with the door handle. I like the way you think Rob. Especially when the workshop is very noisy. You're a problem solver Rob. Even the little things. i like that 👍
19:32 That looks Dahm happy 😁
I hear you have to be careful when removing Ticks. If you don't get all the teeth out it can get infected.
Sorry, couldn't resist.
Boomer
I watched one Barry it self in my chest after an attempt of getting it off of me I literally never got the rest of it out ! Lime disease talk about worried. That was almost 16 or more years ago.
This is why I love this channel, I get to learn so much from it. Unfortunately I probably won’t ever be able to use this knowledge but none the less I have it 😂
"I love pulling a long rod"
- Rob Dahm, 2024
Isaiah has a huge grin! 😜
In today's episode: Rob messes with the lock in the women's bathroom....
This is what mad scientist looks like... endlessly looking for the next advancement... It's wild, keep it up Rob
Stoked to see the 3 rotor transformation
Is that like the 12 rotor?
I've been in this industry here down under for 35 years. I can tell you that this brand is really good for business and it's the one I've had to do the most 'maintenance' on. Wish you all the best with yours. The other two brands very rarely. Make of that what you will.
I really need to get involved into racing . So many of the techniques and thought processes behind them come so natural to me. Every time I watch one of these videos rob talks about something he’s learning to go faster or be faster and it’s something I’ve already been thinking in my head or doing on sim . Eye opening and makes me want to get serious
Came for the sequential, stayed for the door handle content 😂
That door knob is a must, should add shift light too
So cool to see a sequential going into the rx7 it deserves it after all these years, I can't wait to see the next big chunk of progress can be much metalwork left now! ❤
Love that door handle
also the women plaque on the door 😆
Love this! Rob always doing the best stuff!!
Love seeing Ethan get better and better with CAD work!
Can't wait to see the paddle shifter in use. And of course the NOISE>!
Thank you Rob for all your videos you do. Cant wait to see all your hard work pay off when you run pikes peak .
Congrats on the door handle
"I just love slamming through the gears..." Isaiah is not even in the frame but he still gets mentioned, relationship goals
When your transmission is bigger then your engine you need more ROTORS...
Matt is so chill and knowledgeable I could listen to him all day lol
That is one big rod 😳
IVE NEVER CLICKED ON A VIDEO SO FAST
😂😂😂😂 bro I swear I almost dropped my phone
Another day watching our boy enjoy his little slice of gearhead heaven.
This is how exotic cars are conceived. Many Robs together!
proper bit of kit
I’m so stoked for this project. Eager to see you ripping the hillclimb
Sunday morning cyber slacking in Diamond Creek Australia with a fresh cup of coffee and a new Rob Dahm video, perfect!
Oddly enough, watching this video this morning before i head to a car show wearing my red Damn tshirt.
Love your vid man
Wicked stuff👍👍👍
I've got a Tick TR6060 in my twin turbo Coyote powered '65 Mustang. Tick cam/valvetrain/clutch/hydraulic setup in my Gen V LT4 Aston Martin. Active Team Tick member as well. They've always been great to deal with, awesome company.
LT4 Aston Martin?!
@@Berm_Blaster yep. Like Rob, I enjoy making bad decisions.
Yep I agree, hands on the wheel the whole time is important, that pneumatic system will be good!
Let’s go another rob dahm video
You guys should do a collaboration with Roadkill. They're going to recreate their Mazdarati (mid-engined '74 Mazda mini-truck) again and this time are contemplating putting a 4 rotor in it instead of the original v8. What a cool video series that would be.
Would be amazing if rob did a interview with nobuhiro tajima aka monster aka the man behind the escuda pikes peak ect and the first to go sub 10 on pikes before being completely paved. Watching his race videos going up pikes peak are insane. Makes you really appreciate how fast and how close to the edge these guys drive.
When you take a manual transmission so far it becomes an automatic transmission
You should make a "In Use" sticker for the car's door handles
Joel missed a big opportunity to used the "nice" meme there! :D
1:44 laughed my butt off at the amidships mod on the gearbox. Man, they really had to squeeeze that in. :)) Nice.
I built the very first prototypes for ppg and and in partnership with one of the undisclosed 8 elite tremec reps about 8 years ago. Very cool to see where they are today, shit the ppg gear set alone was i think a little under 20,000... cool shit
Almost nutted over the new trans! Working on a 350z build using your nemesis LS 5.3 build. But the trans would be a sick way to go!! I would still trade cars though! LS is a great motor to turbo , coyotes rev ti the moon and sound sick but that Mazda has all others beat when it comes to the pure sound ! Love it Rob I can’t wait!! So excited to see how you do !!! Pikes Peak brother damn !!!!!!!!!!!!
8:03 that got me good 😂😂
That hall effect VSS is pretty cool, I'll need to look into that. I wonder what sort of mad scientist stuff Rob is going to do with that strain gauge. Cool stuff.
It will be fun I personally am a fan of the low helix gear sets. Think helical gears but with less helix most famous being th Muncie m22 "rockcrusher" 4 speed.
Btw the m22 makes more noise because it has roughly a third the helix angle of a ppg helical gearset.
Finally going paddle shift is the big game changer.
Hope you'll not struggle with vibrations
Can't wait to hear those straight cute gears sounds
the 3-rotor is turning into my favorite car
What maximum speed are you expecting to hit on the mountain? I've gone for pretty long (relatively) gearing in my sequential, but she won't be at PPIHC for another two years or so. Max out at ~170mph @8000rpm
That is an awesome transmission! And 1:1 - 6 gear is impressively amazing ... now Rob.... quit going in the women's restroom! LoL
6th gear direct drive is fucking WILD dude.
its the little things
That thing is sweet! Great job.
Man all the time & money invested you better beat the around stock Tesla Plaids up there.
Rob likes to enter women's bathrooms without knocking 😂
YES
darn, i liked the fact the 4 rotor was built to win, including a seequential transmission, but i liked the 3 rotor having a dog box h pattern even more. h patterns are awesome. i get that if you want the car to be as fast as possible sequential is a no brainer though. but h pattern was just so much more baddass.
Sheeesh I've never been this early.
*looks up the price* , *faints*
Yeah baby 😘
I wonder when someone will create a whole electric servo mechanism for seq. shifters. I know pnuematic is popular, but no way it could be lighter or faster or more accurate than the right electric servos.
One day I’ll be able to work my way to being able to visit this shop, and take surely the most cherished photo of my natural life with none other than
Rob Dahm’s bathroom’s incredible door handle.
Is it me or does the transmission mechanic look like Dr.TuneEmAll
LETS GOOOO
I am now coming here for the door handles 🙂
Such a fucken nerd. I love that. Seeing people really hyper focus into what they want and making it happen and sharing all the stuff that went into that decision
$25K for that transmission. I want one now!
THATS WHAT SHE SAID😂😂😂
Looks like Rob's corvettes caught up to him with that grey hair.
RD can finally shift, hooray! lolz
Getting the Jay Leno treatment with auto parts
I think you'll really need the pneumatic option with that close of gear ratios between gears.
Cheese and rice that is beautiful
20:25 - I guess we know why Rob has been hanging out with Hert. It's Simple Seat Time.
My socially awkward ass felt that ending...
I started following them on CZcams when cleetus started using their stuff for leroy 😂
Rob "Clearly has a handle on it" Dahm
Rob, for cooling, try looking up what Mercedes AMG F1 are doing with Reaction Engines.
I think, if you could replicate what they're doing, it could lead to some major weight savings + performance gains over stock cooling methods.
Rob gets hard for data feedback
Loved to see any of your rotary’s ran up against what mazzei formula’s got going on…on an auto cross track of course where true form and function can be tested…because let’s admit it straight line cars get boring after awhile
Gear whine is indeed an intoxicating sound.
12 rotor? Dropping everything