Forging Knife From Ball Chain And 52100 Steel
Vložit
- čas přidán 16. 11. 2023
- Can I forge a knife from nickel plated ball chain and some 52100 high carbon steel?
firecreekforge.com
/ firecreekforge
Shirts, Mugs, Decor and more: firecreekmercantile.etsy.com
#knife #blacksmith #forging
holy beardless batman!
I actually really like that lighter contrast quite a bit. Also the pattern for that matter looks really interesting.
You are truly a professional 👍👍
I'm viewing a completely different person who would normally be on this channel!!! 😉😉😂😂👏👏
AMAZING MAESTRO LOVELY COMPARISON OF STEEL
that shirt has more character now lol
Good times nicely done 👍
Thank you
Please make another!
Well it was looking great
Yeah, too many issues to finish it out!
Another great project/video Elijah! If you never break any of your projects your not pushing yourself or your craft! Thanks again!
Looks like it already had a crack at the spine.good thing you tested it.
I see the discoloration that you're probably referencing, it does look that way however just didn't get cleaned out of the etch well enough. That stress point I created at the edge just took the blade apart.
I was cringing with the final test 😮 it was a beautiful piece then 2 beautiful pieces.
Yes but too many defects to finish out. Thanks for watching!
Don’t worry, you’re not the only one to to set yourself on fire that way.
I only had a t shirt on when I did it
Love the pattern and look at your baby face. Looks like your FiF days
cool experiment!
Ball chain also used as the pull string for the single overhead lights in a house.
Yep good point
Pretty neat pattern, to bad it broke though. Be safe and God bless
Thanks! Yeah it didn't meet the standard
Educational and entertaining. I was just telling someone the other day that is why your videos are among the best on CZcams
I've set myself on fire doing the exact same thing. Mine was a flannel. It was the 90's
you should do barbed wire in a canister with powdered steel to get the contrast and maybe do an edge bar or do what you did with the O1 and bearings in the flat canister thing but with the barbed wire.
I’ve been there so many times, perfectly good shirt then it starts as one little burn hole, then the hole snags on everything and by the end of the day the shirt is in the garbage 🤣
Yes sir, that is the story
It's been a while since u last post missed u man can't wait to see what u do in this one
Thanks! I have a few videos in the last month that were pretty fun if you haven't seen those.
@@FireCreekForge no I thought you went off the radar
Weld er up! Oh Honey, look what I made you for the kitchen!🤭 Happy Belated Thanksgiving, Elijah
Was !!! A really nice shirt 😂
That pattern is cool, it looks like the patterns in agatized dinosaur bones!! Awesome video!!😍👍😎👻🌶️
Thanks glad you like it!
I hated to see it break it was beautiful but i did learn something.
We now have matching shirts, for the same reason! BTW I liked your process better than the "other guy on CZcams" and hadn't thought that those beads are hollow. I suppose mashing them in a press before putting them in a canister would work, but man, that's a lot of work. Thanks for sharing your experiment.
An idea for a canister I got from your "contained non canister, canister" where you drilled and added roller bearings: take rods of different shades of steel, place them each specifically in its own spot, creating a dot matrix/pixel art type pattern. Can't be much more time consuming than welding, cutting, grinding, stacking, rewelding, cutting, regrinding, restacking over and over again for some of these mosaics they come up with. Could copy any photo, in black and white style to any project. For bigger parts of a picture, could use water jet cut shapes.
Which gives me another idea: possibly use water jet, dot matrix comb I ned for the pattern of a touchmark billet, mild steel powder, etch end to depth desired for imprint.
Might work!
Can’t tell you how many times I caught myself on fire😂
Cool pattern though
Nice work. Up until it snapped I thought the blade did well against that rod. What you did is basically machining in the end, well, once you make the blade a bit more robust and work out work holding.
That was cool, almost always sad to see something break though lol
the leopard skin pattern is very cool but yes the steel cutting is a problem.....
I wonder if a much wider canoe cannister might help or maybe forging the chain into blocks before you put it in with the 52100
either way thankyou for sharing, I like that you share stuff like this....definitely a thoughtful learning experience
I thought the buck knife was hammered through a railroad spike, but my memory isn't what it used to be.
Very cool build! I hate the jacket didn’t turn out like you wanted. Very cool build
Good idea. I'm wondering if crushing the ball chain before putting it into the canoe would have had a different result.
Yes I believe it would. I thought of that, after the fact.
@FireCreekForge in light of Dr. Thomas' findings that nickel and 1095 had the best testing results for the Damascus steel, crush the chain, and then just add 1095 powder. Just an idea I just had.
Awesome to see such a hefty test. Few blades will survive it well. Next time, ball bearings again? :)
Thanks! I have a different idea planned!
The Buck pocket knives hammered through steel was legit. I know they would hammer through nails. And there was no nicks in the pocket knife blades. Might have been bolts as well but not for sure. This was back when they were using 440 and 425M steels. Not the 420 steels that they use today.
Yes the Buck knives used to be pretty hard. I found this out the hard way when I snapped the tip off of my Buck 110 Hunter.
Check out your face 👍
Very interesting Video, not often you see makers cut anything really heavy duty. That blade was a beast 👍
Got a challenge: What about a blade made from keys & bike rims???
👏👏👏🤜🤛
Maybe folding the metal would push out more of the impurities - might result in fewer cracks and voids.
Who is that beradless dude?...lol I liked the pattern on the blade.
You shaved!
Is that one of Alex steells hammers from a couple of years ago
No it's one I forged.
Leather apron bro
Haha, yes I have one but the only work if you put them on
So when you end up destroying a blade like in this video whether its for destruction testing or a mistake of some sort what do you end up doing with the steel? Do you repurpose it an throw it into another damascus billet down the road or just toss it out with the garbage? Lastly ive been curious as to where you purchase your steel from because you have some sizes of stock ive been considering wanting to pick up. Thanks
If a blade doesn't make the cut it just goes in the scrap bin. Most of my steel comes from New Jersey Steel Baron.
It'd be interesting if you have some extra time for you to do a scrap-mascus build with your scrap bin leftovers. Maybe do a raffle or giveaway item if you were inclined to do, I know some of those can be a lot of work and not always worth the squeeze it's just a thought. I mostly would just like to see something interesting/successful made from failed/destroyed items. Anyways thanks for sharing I always enjoy seeing what you are making. I live in northern idaho about an hour away from where you used to be.
How much for that “fire” creek forge shirt!!! 😂🔥
Эй! А куда борода пропала?))
Woahhhh you shaved
Wait, you shaved your beard right before winter? You're gonna be cold
He covered that in his q&a video a few days ago, said he was having trouble with his grinding mask
I don't understand why you did that.
Most of the jacketing was ground off and I stilI couldn't get all the inclusions out of the blade. The blade was not something I was going to finish out into a knife. Rather than having a blade I wasn't satisfied with sitting around, I decided to turn it into a test blade.
Oh NOOOOOO!!!!! Not your favorite canadian tuxedooooooo!!!!!!!!!!!
I know!!
Why did you shave your long beard man???
Trying to figure out a respirator issue.
Whoooooo first again lol I'm getting good at this lol
Yeah its easy to twist if you dont know how to center your hammer blows...and you set yourself on fire... Why would you do that knowing what a grinder does.? You do know, right?
hi