Kappsäge gerade bestellt. Hoffentlich qualitativ so gut, wie alle meinen anderen FEIN-Werkzeuge. Ich habe dem Namen vertraut, den ich schon seit über 40 Jahren kenne.
@@marste1125 Die Maschine ist ihr Geld wert. Sie ist ja wirklich nicht sehr teuer und ich habe den Kauf nicht bereut. Allerdings habe ich nur selten was für die Maschine zu tun - aber wenn, dann will ich nicht mehr mit der Hand sägen.
Schönes Projekt und erfreulich unaufgeregt geschnitten. Habe es meiner jahrzehntealten Fein Zweihandbohrmaschine gezeigt. Sie sagt, die MKAS darf hier einziehen.
Hi @timobachinger1700, was meinst du damit? In unserem Video, siehst du das Projekt von Mats mit dem Waschtisch und unserer Metallkappsäge MKAS 355. Gruss dein FEIN-Team
Für eben solche langen Rohre wäre es viel besser der Kopf der Maschine liesse sich im Winkel verstellen, so muß man ggf. laufend den Lagerbock umsetzen und mit dem Rohr rumfuhrwerken, ist nicht sehr angenehm.
Why does every single chopsaw on the market, look identical? It seems like all the big tool companies just paint it in the company colors and slap their stickers on... The only exception is the Evolution S355MCS. The ONLY metal chop saw on the market where the designers actually spent more than 10 minuttes on the design. I think there is several issues with the FEIN (and all the other clones) "design". 1. Way too much slack in the vice. 2. The vice should be fixed and the SAW should be able to rotate 45 degrees in each direction. For better material support and the tubing etc. is always "in line" with the saw. That way the saw can be placed up against a wall and in/outfeed support rollers could be manufactured... 3. Missing variable speed (for stainless steel etc.) 4. Price!!! Way too expensive for what you get... I would spend my money on a good bandsaw. You'll get a lot more flexibility and joy out of that...
Hi caspermaul7583, The fact that most machines look similar has to do with the fact that the quality has proven itself and therefore they are built similarly. 1. the adjustable fence plate can be fixed by means of a clamping lever and therefore does not allow any play. 2. our machine can be turned in one direction up to 45°. 3. a variable speed adjustment is not necessary, as this is determined by the thickness of the blade, number of teeth and geometry. 4. the price of our machine is adjusted to market. Your FEIN-Team
Stark. Ich liebe meine Fein´s. 25 Jahre alt und laufen wie am ersten Tag.
Richtig cooles Video! Man sieht richtig wie viel Mühe und Liebe darin steckt. Bitte mehr davon! 😃
Super Projekt! Ich glaube ich brauche jetzt auch so einen Waschtisch - und natürlich eine Metallkappsäge
Kappsäge gerade bestellt. Hoffentlich qualitativ so gut, wie alle meinen anderen FEIN-Werkzeuge. Ich habe dem Namen vertraut, den ich schon seit über 40 Jahren kenne.
Hallo, ich wollte mal nachfragen, wie sich die Maschine so macht nach ner Weile?
Danke!
@@marste1125 Die Maschine ist ihr Geld wert. Sie ist ja wirklich nicht sehr teuer und ich habe den Kauf nicht bereut. Allerdings habe ich nur selten was für die Maschine zu tun - aber wenn, dann will ich nicht mehr mit der Hand sägen.
Stark! 💪🏼
Fein für feine Handwerker
🔥🔥
Schönes Projekt und erfreulich unaufgeregt geschnitten. Habe es meiner jahrzehntealten Fein Zweihandbohrmaschine gezeigt. Sie sagt, die MKAS darf hier einziehen.
würde mich über eine Bandsäge von Fein freuen
Nices Teil... Weldas, 3M und Engelbert Strauss haben sich auch gleich in das Video reingekauft?🤣
Passt bei der Maschine auch die Winkeleinstellung oder gibt es Korrekturmöglichkeiten?
Wie sieht es denn bei der Drehzahl aus , beim trennen von Edelstahlrohren , hier z.b 1.4301 ? Gibt es eine Drehzahl Regulierung ? Danke !
Bin auch gerade so Überlegen, diese Maschine zu kaufen....
Bei Werkzeug darf man nicht überlegen
Immer kaufen du musst es haben
schönes Video, gibt es eigentlich eine Arretierung für den Gehrungsanschlag auf 45° ? das kann man leider im Video nicht so gut erkennen.
Wieso hat fein nicht mehr werkzeug zur verfügung gestellt
Hi @timobachinger1700, was meinst du damit? In unserem Video, siehst du das Projekt von Mats mit dem Waschtisch und unserer Metallkappsäge MKAS 355. Gruss dein FEIN-Team
Für eben solche langen Rohre wäre es viel besser der Kopf der Maschine liesse sich im Winkel verstellen, so muß man ggf. laufend den Lagerbock umsetzen und mit dem Rohr rumfuhrwerken, ist nicht sehr angenehm.
Why does every single chopsaw on the market, look identical? It seems like all the big tool companies just paint it in the company colors and slap their stickers on... The only exception is the Evolution S355MCS. The ONLY metal chop saw on the market where the designers actually spent more than 10 minuttes on the design.
I think there is several issues with the FEIN (and all the other clones) "design".
1. Way too much slack in the vice.
2. The vice should be fixed and the SAW should be able to rotate 45 degrees in each direction. For better material support and the tubing etc. is always "in line" with the saw. That way the saw can be placed up against a wall and in/outfeed support rollers could be manufactured...
3. Missing variable speed (for stainless steel etc.)
4. Price!!! Way too expensive for what you get...
I would spend my money on a good bandsaw. You'll get a lot more flexibility and joy out of that...
Hi caspermaul7583,
The fact that most machines look similar has to do with the fact that the quality has proven itself and therefore they are built similarly.
1. the adjustable fence plate can be fixed by means of a clamping lever and therefore does not allow any play.
2. our machine can be turned in one direction up to 45°.
3. a variable speed adjustment is not necessary, as this is determined by the thickness of the blade, number of teeth and geometry.
4. the price of our machine is adjusted to market.
Your FEIN-Team
made in China/Taiwan? oder?
ja, und das ist auch gut so. Oder auf was willst du hinaus?
Made in Taiwan wenn ich das richtig gesehen habe im Video. Könnt ihr was dazu, wo welche Geräte produziert werden und warum.
@@FEINGermany Vielen Dank 👍
Für 750 Euro bekommt man noch nicht mal eine vernünftige Kaltkreisäge. Aber für dicke U Stähle oder T Träger ist das nix.