Swing LIBRA RS EN-C 2-Liner - explanation of the risers
Vložit
- čas přidán 26. 08. 2024
- LIBRA RS
...the game-changer!
Based on the successful and proven genes of our SPHERA RS, the LIBRA RS is a semi-light and easier-to-pilot version of our high-performance glider.
With an aspect ratio of 6.9 and a canopy weight starting from 3.7 kg, the LIBRA RS is one of the finest gliders in the new EN-C 2-Liner class. Despite our initial disbelief while reviewing the test flight results, due to them being so good, it is important to note that the LIBRA RS is designed for experienced Pilots who seek the highest performance levels in their flying equipment.
The Risers:
The LIBRA RS riser features two main risers, each of which is divided. The split A-riser makes it easier to put on and take off your ears, while the BIII-trunk line is separately suspended through a run-through system, which provides:
A more stable outer wing during accelerated flight.
More effective pitch control through the rear risers.
This is accomplished by the differentiation of the outer B-stem line, which causes the BIII to convert only half of the input during both acceleration and when pulling on the B-risers. The ergonomically shaped T-bar, designed specifically for the LIBRA RS, enables maximum control of the canopy through the rear risers and can be easily disassembled if needed.
my first paraglider was the swing Arcus in 2000. Boy how things have changed performance wise
This is very interesting. I'd like more explanation, a video or a technical sketch. If I understand correctly, the outer A line (A3) is not pulled differentially to A3 and A1 during accelerator engagement. This is what i find strange. I understand that the B3 being pulled down with accelerator means that the increased AOA in the tips is still achieved, but i thought this differential done with the A3 being pulled less instead, was giving a better ability to respect the arc of the wing inducing the tips to move back compared to the center of the wing...
Looks amazing! 🙌
Bravo!! I am thinking to buy it!!
The riser of the Sphera is slightly different. Is it possible to change it to the Riser of the Libra? If yes: would you suggest it?
Double it and give it to the next one
😅