Multipick Flip-It Plug Spinner Review
Vložit
- čas přidán 7. 02. 2020
- I finally get my hands on a plug spinner! One of those tools that when you need one, you wish you had one! 😁 let me know what you think of this one from Multipick in the comments 😃👍
shop.multipick.com/en/opening...
Remember: only pick locks that are yours and that are not in use! Keep locksport legal!
Contact me at: locknoobcontact@gmail.com
Disclaimer: This set was sent to me for review by Multipick and so under the The Committee of Advertising Practice (CAP U.K.) rules, this counts as sponsored content. This is not an advert. I do not accept money to do reviews and and there is no expectation for me to review an item positively or even at all. I do not profit from the sales of this item. The opinions expressed are my own. I do provide designs and consultation to multiple lock pick manufacturers, including Multipick, Sparrows Lock Picks and Wendt. As I only like to show and review items on my channel that I think have some merit, if I don’t like something, I generally don’t tend to do a review and I feed any issues back to the supplier.
T-shirts and merch:
shop.spreadshirt.co.uk/LockNoob
Lock Noob lock holder for 3D printers:
www.thingiverse.com/thing:288...
Lock Noob pinning tray for 3D printers:
www.thingiverse.com/thing:286...
![[6] How to use a Plug Spinner](http://i.ytimg.com/vi/9zRbrMPJArY/mqdefault.jpg)
I finally get my hands on a plug spinner! One of those tools that when you need one, you wish you had one! 😁 let me know what you think of this one from Multipick in the comments 😃👍
Honestly the design is nice to the eye but sh*t to use... Why did they make the front part round?!?!? You can hardly tension that thing... Why didn´t they put some kind of jimping on it? The rubber rings do nothing.... I love Multipick, but everyone telling me that this is easy to use as a locksmith is a fkking Fanboy! Especially when WD40 comes into play...
Small correction, perhaps: It seems to rotate by 90°, not 180°, which does make more sense, if you think about it. It's hard to tell on this small screen, so please correct me if I'm wrong. That said, it's an excellent idea, so thank-you for the demonstration.
@@RWBHere When the trigger is pushed, it rotates a full 180 degrees, not 90 degrees.
@@clintsingleton3846 what i´ve meant is slippery greasy stuff in general... if you have slippery fingers this thing is a pain in the a$$ to twist and tension...
Great explanation of how a plug spinner works and what it’s used are. I’ve never used one before and I never really knew what they were used for. It looks like a very well built and designed tool.
Thanks 🙏
A fantastic review on this beautifully made plug spinning, thanks for the great demo, Have a great weekend.
You too Daz!
This is a really great tool to have, I like it a lot.. Maybe one day I'll get one. Thanks for the great review! Have a great weekend my friend
Thanks you too!
Another premium german multipick product , definitely glad its there when you need it :)
For sure !
Fantastic review!
Quite a handy little device -- I've been meaning to pick one up for a while now. Great review / tutorial video! Cheers and have a great weekend. 😁👍
Thanks 🙏
That is a nicely engineered piece of kit, if i was to get one that would it, great vid thanks for sharing, thumbs up.
Thanks 🙏
This is a beautiful tool to have in your bag,in case you need to swap open your lock to be open
Fantastic review ash my friend. Multipick make beautiful and very useful equipment. 👍🤘🖖🍻
👍👍👍 sure do DALP!
Beautiful tool! I like the trap pin application!!
Great review!
🐈👍🐈👏🐾
Thanks 🙏
They surely know how to make great quality products, very cool and great review and demo.✌😎
Thanks 🙏
At 7:26 when you flipped the core 180 degrees, the only pins that catch the core are the driver pins. the core pins are tucked into the core. All you have to do is stick the flat side of the pick into the core and push them back down flush to turn it. no picking or flipping needed.
Multipick makes some very nice looking quality tools. Have not had a need for one of these yet but might add one someday to my kit.
Thanks for watching 🙏
I can highly recommend this gadget. It's just as nice as it looks.
It does look good!
That's got to be the best of the best in plug spinners.
Certainly the best looking!
Nice tool I need to add one to my tool kit
Very informative video
Thanks 😊
I use one Myself , luvly to use well Machined .. Nicknamed ThunderBird 1 because of its Shape 👍..nice Info Vid
Thanks 🙏
Got to have one
It’s lovely 😊
Great video. I couldn't tell from the unboxing if the spinner comes with differently sized tips. Thanks for letting us know! Take care.
No you just get the one tip, or at least that's all that came with mine which I got from multipick about a year ago which is about 4mm across
@@JohnDoe-ee6qs Thanks! I appreciate your time. Take care.
@@webfox1 no problem
Just one :-)
Cool demo--- never used one--- looks like a nice bit of kit
It is :-)
Yet again a quality product from Multipick. You can visibly see the effort that's gone into the design. I haven't used a plug spinner before but do understand the concept behind it. Great review and demos. I never thought of using one on a cross lock, I guess that's because I never thought that it would work on one. People say it's unrealistic to pick cross locks several times as it slows down the picking to get an open. Well, using one of these shows that you only need to pick it once and then let the plug spinner do the rest.
The design has it´s flaws... the rounded front part is pain in the ass to tension...
@@Mex_the_Fox I actually thought that when observing the tool being used. The larger back part looks ok to grip because of its shape. The smaller front piece is small and doesn't look like it gives much grip for the fingers.
The Multipick plug spinner looks like a solid tool and strong, not flimsy. That's what I meant by my comment. 😁
@@roysammons2445 that's what I wanted to say... I own it but I modified the front part. I removed the rubber rings and gave it two clean but deep finger grooves... Honestly, without that mod, I'd prefer any 15$ tool over this one...
Glad you like the review 👍😃
@@Mex_the_Fox You do have a very good point.
Looks like a great product &!!
I like it :-)
I absolutely love this tool! No plastic, no accidentally going off. You have to mean it.
- However; I wish they had milled a flat area (from the factory) to aid in charging this left or right with the aid of a wrench. This thing has a tight spring. Even lubed it up a few times thinking this might help. ..... Still, I wouldn't have any other plug spinner in my bag! Pick whichever direction you need, then go! Or of you have to turn a cylinder multiple times to open the mechanism, no problem!! Just Flip-It!
Yes, it is tight! 👍
Great review. Looking more useful now!
Thanks 🙏
Great review and demonstration on plug spinners. I have two different styles both Chinese built. They work Just fine but nothing like the MultiPick for style and ease of use.
Thanks 🙏
Very pretty. Much nicer than the one I made out of a mousetrap and a wiper insert. 😂
Hey, if it works!
Beautiful spinner, as much as I would love a multi-pick plug spinner, my $15 one will have to suffice. Great video, really liked how you showed the various ways it comes in handy 🔒🔓👍🔐
If it works it works :-)
I have a plug spinner that I keep with me while I am rekeying residential or anyplace. that is seriously cool. I do not even know if I would want to use that thing. It needs to be on my mantle in a little glass case with a turntable..
Very cool!!! I want one!!!!
Great Review!!!
Thanks 🙏
I've wanted a plug spinner for quite some time now, just to have. I like the look of the multi pick one. Only reason I haven't invested in one is mainly because of how little use it would see as a hobbyist picker. Good review, have a great weekend.
Thanks 🙏
@@LockNoob what's kind of ironic? Thursday I picked up a padlock, just a cheap one from princess auto, the bitting is pretty decent on it, what I liked the most is its surprisingly rekeyable with a shielded shackle. I can pick it backwards quickly, be darned if I can get it picked clockwise yet though. Hahaha. I guess I do in fact need a spinner in my collection now.
Great review Ash, no doubt about it's quality. Would be great for changing the shackle on padlocks like the Commando's. Take care and have a fantastic weekend.
Great idea Gazz!
very cool Ash mate great demo👍👊😊🇬🇧😎
Thanks Leon 👍
The poor man's version I found that works is to tape a rubber band to the end of a tension tool, pull the rubber band towards the direction you need while holding the pick, and then letting go of the pick, so it flings towards the direction you need it to go
Premier product, comprehensive review, looks like a useful tool, will have to get one
Thanks 🙏
They should give extra tips at those prices but extremely well made & a great tool to have no doubt. Good review Ash, have a great one.
Thanks friend you too!
Nicely done my friend great review. 😎
Thanks 🙏
I have one of these. I can’t say it is better than the less expensive ones but it does it in style. LOL
👍
Tubular lock plug spinners need to be a thing. Million dollar idea right there.
You could easily just make ends that use the existing threaded holes in that spinner. Imagine not having to pick the core six times for an open, then back.
That’s a good idea 👍
@@LockNoob
Not really since tubular lock picks exist.
Have one have to say the quality is excellent
👍👍👍👍
Very nice, but don't you know anything?🤬
NEVER press the red button.😁👍🏼👍🏼
What?
😆😆
@@NoobSharkey WHOOOoooooosh
@@MrWhitelines WHOOOO are you
Very 👍
👍
Is kronos a better epg than gd locks?
I think these are the best plug spinners on the market period ! Hopefully I soon be able to buy one..:-)
They are very nice!
Does it work on M1 or M5 ? I can only pick those CCW . My homemade spinner did not work on these magnum locks, so I bought one offline. It is strong, I almost have to use pliars to set it at full power. It also does not work on M1. Any thoughts? (Just noticed that between the spinner and the lock- - Unstoppable force meeting unmoveable object-- it bent the male stainless steel fitting that inserts into the female lock hole. )
if you mean padlocks, i guess so, but it's easier to just pick them clockwise
I'll be grabbing this one as soon as I can afford it. I'm way over my budget because Christ Mass and subsequent birthdays.
👍
Nice review, but it's still questionable how often common locksporter will use this tool? If you use it once in 40-50 locks, then it is better for that amount of money to buy a 5-6 different lock picks...
Obijanje Brave yeah, it’s one of those nice to have tools. As a locksmith it’s indispensable, as a locksporter maybe not as much. I’m glad that I have one though, for those scenarios where they are needed. I guess I pick a lot of locks though 🤷♂️😃
Waste of money in my opinion but some fellows may want it as another tool to play with - looks good I will give you that.
It does look great 👍
You can flip off some locks with it.
😁
Lovely looking tool - just like all multipick items
I have a cheap chinese version that I purchased not nearly as nice to look at but it does the job
When I win the lottery I can buy a better tool set - or if someone donates one to me - hint hint
Please keep doing your videos - love them all
If it works it works!
Great review great vid keep up the good work. :)
Thanks 🙏
Lock Noob what brand is that lock in your vise? i got one of those locks and dont know what brand it is.
Brian Grant it’s a Federal 200 body I think 🤔
@@LockNoob i was talking about the first one, the euro cylinder one.. i have that same lock, but mine is only a half cylinder...
It's also great for doors that have a deadbolt mechanism that gets engaged the second time you lock it. A lot of door locks in Europe work that way and normally you would have to pick it twice. With a plug spinner you can pick it once and then turn it for another time using the plug spinner. BTW. plug spinners can easily be improvised with rubber bands and torsion wrenches or 3D printed. But it doesn't look this good, admitted.
Good comment, thanks 🙏
Can this unlock my side door
No
they are Au$117
Is this going to be in a draw soon? 😉
Nope! I’m keeping this one 😁😁😁
This Multipick spinner I bought in March/2020 from an Australia seller does not have that steel pin you mentioned at 2:36. I surmise Multipick removed the pin because it's been causing some reliability problems. It seems to work just fine without the pin and does not to seem to cause noticeable wear on the notch.
One thing I'd personally prefer is if it used deep cutouts (like those found on the handle top) instead of three flimsy rubber o-rings on the lower barrel to provide friction when charging the spring because the spring is exceedingly strong and the friction provided by the rubber o-rings is just barely sufficient. If there is a bit of body oil, grease, or WD40 residual on the o-rings, good luck trying to charge the spring without the barrel seriously slipping. Also the rubber ages or wears over time, it will become much harder to grip the lower portion during charging.
Interesting to know, thanks!
fact is, the only real reason you would want or need a plug spinner is to look cool because women love them.
woman "whats that bulge in your lockpick case"
locksmith " thats a plug spinner "
Sure.... 😆
You also must be a Gamer, only gamers type it as "Noob" and not "Newbie"
Hello you Noob! 😎👍
I am a gamer
Thank you lock noob u and lpl and bosinbill have inspired me to try this youtube stuff i made my 2nd video please check it out
I will!
@@LockNoob any suggestions
Why don't you get straight to the point?
Feel free to make your own 10 second videos 🤷♂️
@@LockNoob Well one thing, if I did do my own video it won't be as drawn out with waffle like this rubbish offering of yours!
@@fredcatcreedy980 which you watched. And commented on. Twice. 😂😂😂😂😂😂😂😂😂
@@LockNoob Yes in order to responsed to you ludacris remarks. Your channel is only slightly better than watching wet paint dry and I mean only slightly better! Did I mention also the numerous fake videos you polluted this service with!
Fred Creedy you watch paint dry? 🤷♂️