Btw for those needing to know how to make the tool 1) it’s a close hanger, use wire cutters or pliers to shape it 2) go to the end of the video when he takes the inside cover off and you’ll just have to visualize how to shape the hanger but basically it goes in the hole, then left and then down. Hope that helps.
Worked like a charm with our safe at work. Saved us some money after the batteries came loose and our backup key didn't work. To anyone having trouble, make sure the tool is bent to the left and then down. A good view of his tool is at 2:22. Once we got that it only took a minute to open it. Thank you!
Gracias compañero, me sirvio tu video, yo tengo una caja sentrySafe mod. T633 utilice un serchero de alambre porque es mas fuerte. Para los que pregunta la medida yo lo hice de 1ero. 10cm. El 2do. De 5cm el 3ero. 10cm. Aparte de eso utilice una camara endoscopica con cable para poder visualizar a donde tenia que presionar, pero el compañero muestra al final de video como va el mecanismo, cuando logre presionar el boton tuve que mantenerlo presionado y girar la palanca del exterior para que abriera. La verdad el que investiga lo puede abrir asi que son uso domestico estas cajas. Gracias nuevamente compañero por tu aporte. Desde Guatemala saludos
Worked like a charm, initially I thought the batteries died (and my wife said oh I lock the keys inside the safe ugggh) but after using your trick (about 10 minutes) I took the inside cover off and one of the connectors had actually popped off at the battery connection, I replaced the batteries reattached the wires and it’s all good, thanks, vacation in a few days and passports were in the safe.
My batteries were to low to open and I can't remember where i put the key. This worked and was so easy! Thank you! Now I need to get a safe that's more secure!
This video helped me a lot... it took me around 1hr to succeed... you may fail a lot of times at the beginning but it should work out at the end, just take a deep breath and keep repeating calmly. You will need the first length exactly 7cm and then bend it at 90 degrees. the second segment need to go inside 3 to 4 cm maximum while rotating it. hope this helps 😀
What were you saying at the beginning about applying 6 volts to? I have a power probe I can get 6v from but which wires do you apply it to, and what does it do?
Question, if you see this and might know the answer. I recently bought a similar safe, haven't messed with it yet. the Tc8-331 off of a guy. Don't have the code or key BUT the safe door is OPEN. Will just pushing the reset button inside reset the code so I can program a new one you think orr.. I don't know anything about safes.. yet. Thanks!
I’m so thankful for this video. I used a old metal coat hanger gave it a long solid handle and a long hook had to go inn deeper than this video shows. Worked awesome
Ended up knocking the lock through, I then used a jigsaw to enlarge the cutout for the wires and the lock and getting to the solenoid with my finger. Won't be buying another Sentry safe, they are quite weak from a security point of view. Without the dimensions for the wire it is impossible, I spent hours adjusting the wire to what I thought was the correct length. I also tried hot wiring the red and black wire with 6 volts to no avail. My safe was a T5-330. Took me 5 minutes to break into it with a lump hammer, large screwdriver and Ryobi jigsaw with three HSS blades.
Unfortunately this will not work with model Sentry Safe TC8-331. The door has an asbestos plate about an inch thick and there isn't enough room left to maneuver the wire for a left turn down to the lock release.
Buenas noches no sé si pueda traducir estás palabras pero tengo una caja sentry de esas mismas y necesito comprar ya sea por Ebay Amazon la pieza de los números de los códigos gracias Javier
I am trying this also and haven't had any luck! I snagged something on the battery pack when closing the door and didn't realize 2 batteries fell out. Have NO IDEA where the key is and may never. Now I am locked out and I have items in there that I need! :( I f I keep trying, do you think this will really work? One locksmith I called said all he could do would be to break the safe. I don't want to break it! My husband is out town and he is going to be ticked! :(
Could you help me with the following, I have this model and I have had no battery and the key is inside, but I know the code, is there a way to give it power to enter the code?
i have a scentry safe the door is open but the bars are out i cant close it my stupid husband forgot code i have sll the other codes need to reset passcode please help
Alright, let's unpack a few things here. 1. The guy who made/posted this video isn't responsible for your robbery. 2. If you buy literally the LOWEST quality safe on the market you can hardly complain about your shit getting stolen. 3. You should've mounted it to the floor/wall like a normal person. That defeats the entire purpose of having a safe. 4. You don't downvote a video because it offends you. You downvote it because it's shit content, and this is not shit content 5. Protecting your home isn't limited to spending $200 at Home Depot and literally throwing it on the floor. Get some German Shepherds, firearms, home security system, better door locks, cameras, high-quality multi-lock safe secured to the floor, etc. and compound your security practices. 6. If the safe was taken away to the thieves den, for them to open at their convenience, they are not going to be watching youtube videos on how to open it. They already know how. And even if they don't, they would find a way in. These safes aren't exactly difficult to open either destructively or non-destructively. A child could do it. The lack of this video would not mean they'd be unable to open it. Trust me, it was open in 10 minutes with or without this method. 7. This video wasn't posted to instructed thieves. It was posted to show how weak Sentry is, to aid locksmiths and owners, and probably just for the fun of it. You have a LOT to learn about security. If you invested half as much energy into that as you do into throwing a tantrum on youtube, you'd instantly be twice as secure as you are right now.
Worked like a charm, initially I thought the batteries died (and my wife said oh I lock the keys inside the safe ugggh) but after using your trick (about 10 minutes) I took the inside cover off and one of the connectors had actually popped off at the battery connection, I replaced the batteries reattached the wires and it’s all good, thanks, vacation in a few days and passports were in the safe.
![[1020] SentrySafe Opened With a Coat Hanger!](http://i.ytimg.com/vi/i7g-TvczpSw/mqdefault.jpg)
I'm a locksmith and this information just helped me greatly to get somebody into their safe. I appreciate this video so much
Btw for those needing to know how to make the tool 1) it’s a close hanger, use wire cutters or pliers to shape it 2) go to the end of the video when he takes the inside cover off and you’ll just have to visualize how to shape the hanger but basically it goes in the hole, then left and then down. Hope that helps.
Worked like a charm with our safe at work. Saved us some money after the batteries came loose and our backup key didn't work. To anyone having trouble, make sure the tool is bent to the left and then down. A good view of his tool is at 2:22. Once we got that it only took a minute to open it. Thank you!
Gracias compañero, me sirvio tu video, yo tengo una caja sentrySafe mod. T633 utilice un serchero de alambre porque es mas fuerte. Para los que pregunta la medida yo lo hice de 1ero. 10cm. El 2do. De 5cm el 3ero. 10cm. Aparte de eso utilice una camara endoscopica con cable para poder visualizar a donde tenia que presionar, pero el compañero muestra al final de video como va el mecanismo, cuando logre presionar el boton tuve que mantenerlo presionado y girar la palanca del exterior para que abriera. La verdad el que investiga lo puede abrir asi que son uso domestico estas cajas.
Gracias nuevamente compañero por tu aporte. Desde Guatemala saludos
Worked like a charm, initially I thought the batteries died (and my wife said oh I lock the keys inside the safe ugggh) but after using your trick (about 10 minutes) I took the inside cover off and one of the connectors had actually popped off at the battery connection, I replaced the batteries reattached the wires and it’s all good, thanks, vacation in a few days and passports were in the safe.
Worked like a champ! Less than a minute to get in thanks
Just saved me a call to a locksmith. Thank you! Now if I could just figure out where I out the manual key. Is driving my OCD crazy.
My batteries were to low to open and I can't remember where i put the key. This worked and was so easy! Thank you! Now I need to get a safe that's more secure!
Thanks so much for this Video! It’s helped me so much and has cured the stress I was having about not being able to get into my safe. Many thanks!
Dude I can't believe this actually worked but it really did. Thanks a ton!!
Spot on!!!!! Thanks
This video helped me a lot... it took me around 1hr to succeed... you may fail a lot of times at the beginning but it should work out at the end, just take a deep breath and keep repeating calmly. You will need the first length exactly 7cm and then bend it at 90 degrees. the second segment need to go inside 3 to 4 cm maximum while rotating it. hope this helps 😀
What were you saying at the beginning about applying 6 volts to? I have a power probe I can get 6v from but which wires do you apply it to, and what does it do?
Question, if you see this and might know the answer. I recently bought a similar safe, haven't messed with it yet. the Tc8-331 off of a guy. Don't have the code or key BUT the safe door is OPEN. Will just pushing the reset button inside reset the code so I can program a new one you think orr.. I don't know anything about safes.. yet. Thanks!
I’m so thankful for this video. I used a old metal coat hanger gave it a long solid handle and a long hook had to go inn deeper than this video shows. Worked awesome
maybe there is a way to block the access to the solenoid?
Thanks man,, it’s working 👍
do you need the original combination to change to your combination or by pushing the read button will work with a new combination?
This is just crazy can't believe they'd miss this design flaw. Great now I'm gonna have to send mine back for a refund.
Ended up knocking the lock through, I then used a jigsaw to enlarge the cutout for the wires and the lock and getting to the solenoid with my finger. Won't be buying another Sentry safe, they are quite weak from a security point of view. Without the dimensions for the wire it is impossible, I spent hours adjusting the wire to what I thought was the correct length. I also tried hot wiring the red and black wire with 6 volts to no avail. My safe was a T5-330. Took me 5 minutes to break into it with a lump hammer, large screwdriver and Ryobi jigsaw with three HSS blades.
this video help me to open my safe which is locked for 3 year now i open it thanks
Unfortunately this will not work with model Sentry Safe TC8-331. The door has an asbestos plate about an inch thick and there isn't enough room left to maneuver the wire for a left turn down to the lock release.
Thanks. So for that safe it'll need jumper wires?
You are a god sent
I used this method to open a safe for a friend. Thanks!
Please tell me the dimensions of the wire arm. Thanks
Anyone know where I can buy a new keypad cable for the tc8-331 model or a new keypad if necessary
Awesome I opened it great thank you
Please tell me the dimensions of the wire arm. Thanks
it works, thank you
Awesome thanks
does this method still work on a Fire Resistant Sentry Safe TC8-331?
Any idea how to pick the lock?
Thanks mate you helping allots just on next video could you can put the measurements of the bends please . Thanks anyway
hey bro i Cant...You can make a tutorial on how to make your video tool please or create a pdf on how to make the tool? thanks!!!
Buenas noches no sé si pueda traducir estás palabras pero tengo una caja sentry de esas mismas y necesito comprar ya sea por Ebay Amazon la pieza de los números de los códigos gracias Javier
Works but now my safe doesnt want to close unless i push on the top. Do you know what the fix is?
I am trying this also and haven't had any luck! I snagged something on the battery pack when closing the door and didn't realize 2 batteries fell out. Have NO IDEA where the key is and may never. Now I am locked out and I have items in there that I need! :( I f I keep trying, do you think this will really work? One locksmith I called said all he could do would be to break the safe. I don't want to break it! My husband is out town and he is going to be ticked! :(
ANGELA CAGLE did you open it yet?
Am having a hard time with finding the thing you need to push
Could you help me with the following, I have this model and I have had no battery and the key is inside, but I know the code, is there a way to give it power to enter the code?
I have the same trouble :(. How you can resolve it?
I can not get it to work I have no idea once it’s in there
Yeah I've been trying this too and isn't working
it worked!
I can't get it to work either man
Please tell me the dimensions of the wire arm. Thanks.
My dimensions of the wire is 2.5 x 2.5 x 4.0 inches working fine. Thanks for video.
just saved me some $$.. thanks
Thx dude I stole all the gold from my parents safe
If your dumb parents were stupid enough to buy a sentry safe, they deserve to be robbed.
What did you use as the rod and how did you bend it?
bossmanzork the angles
Keep trying guys it will work I am female and opened it and did reset to my code yeah
Oh common i open this safe today in 5 seconds.kucky me!🤣
How to reset code? I have my factory code
It didn t work withvme, i tried so hard
i have a scentry safe the door is open but the bars are out i cant close it my stupid husband forgot code
i have sll the other codes need to reset passcode please help
Michele Figari watch the end of the video it shows u there's a reset button just click it
The factory code is literally printed on the inside of the safe. 4:26
Would anyone who has successfully done this put in How many inches or centimeters each bend was?
i need a vacation
SentryUnSafe
yo tengo una caja de esas y es una porqueria y tanto dinero que cuesta me costo 400 dolares
es una estafa lo que hacen con eso
Someone robbed my house and took this safe. Thanks for having a nice vid to show how easy it is to open up 👎
Alright, let's unpack a few things here.
1. The guy who made/posted this video isn't responsible for your robbery.
2. If you buy literally the LOWEST quality safe on the market you can hardly complain about your shit getting stolen.
3. You should've mounted it to the floor/wall like a normal person. That defeats the entire purpose of having a safe.
4. You don't downvote a video because it offends you. You downvote it because it's shit content, and this is not shit content
5. Protecting your home isn't limited to spending $200 at Home Depot and literally throwing it on the floor. Get some German Shepherds, firearms, home security system, better door locks, cameras, high-quality multi-lock safe secured to the floor, etc. and compound your security practices.
6. If the safe was taken away to the thieves den, for them to open at their convenience, they are not going to be watching youtube videos on how to open it. They already know how. And even if they don't, they would find a way in. These safes aren't exactly difficult to open either destructively or non-destructively. A child could do it. The lack of this video would not mean they'd be unable to open it. Trust me, it was open in 10 minutes with or without this method.
7. This video wasn't posted to instructed thieves. It was posted to show how weak Sentry is, to aid locksmiths and owners, and probably just for the fun of it.
You have a LOT to learn about security. If you invested half as much energy into that as you do into throwing a tantrum on youtube, you'd instantly be twice as secure as you are right now.
Oh, one more thing: If you are stupid enough to buy another sentry you deserve to be robbed.
I’m disgusted.
Worked like a charm, initially I thought the batteries died (and my wife said oh I lock the keys inside the safe ugggh) but after using your trick (about 10 minutes) I took the inside cover off and one of the connectors had actually popped off at the battery connection, I replaced the batteries reattached the wires and it’s all good, thanks, vacation in a few days and passports were in the safe.