MICROJIG GRRRIPPER REVIEW
Vložit
- čas přidán 20. 08. 2024
- AFFILIATE LINKS: Microjig Grr-ripper: amzn.to/2Y9mTZN
CAMERA: amzn.to/3nWORT7
24mm prime lens: amzn.to/3CBnKkN
35mm prime lens: amzn.to/39pIShr
50mm prime lens: amzn.to/39uiOBO
85mm prime lens: amzn.to/2XJDqUq
CFAST cards: amzn.to/3CBry5E
SD cards: amzn.to/2XDTvdI\
card reader SD/CFEXPRESS: amzn.to/39qI4sH
card reader SD/CFAST: amzn.to/3hZ1xFv
EDIT SOFTWARE: amzn.to/3hYYSLP
*These are affiliate links which, when you click on them, at no cost to you, will provide the channel with a small commission. In other words, "as an Amazon Associate I earn from qualifying purchases." Your support, should you choose to give it, is greatly appreciated....
PLEASE LIKE AND SUBSCRIBE: / @readiysteadiy
In this episode I give the Microjig Grr-ripper a go - a beginning woodworker's review of a fairly popular product. #readiysteadiy @Microjig #microjig
CHANNEL STATEMENT: This is a channel about my relationship with stuff. We all need to have a better relationship with the stuff in our lives - we have too much of it, and most of it’s junk. If nothing else I hope you take away with you an interest in the stuff in your life - a curiosity for how it’s made - why it’s good or bad - and perhaps even how build new stuff or fix what you’ve got. Having said that - the internet is a terrible place to learn anything. Unless you independently verify what you learn - you’ll never know if it was right or wrong or made up completely…. Unfortunately disinformation is both the currency and the bane of our era. I’m no expert in anything you’ll see here. I don’t want you to think that I am. Through my job I have access to people who are - and I’ve learned from them over the last couple of decades and become someone who is curious about stuff, brave about stuff , and foolish enough to try and make a youtube channel about my relationship with stuff all at the same time.
DISCLAIMER / PLEASE READ: In making this channel I will put more effort into making the content accurate, safe and correct than most - but that doesn’t mean I can’t be wrong. Accordingly I can’t guarantee or warranty any specific outcome for viewers should they attempt something similar to what they see on the channel. I encourage you not to copy projects you see here directly but build on them - discuss them with experts in your life, and make them better - make them work safely for you. We all need to figure out a better way to own stuff - this channel is meant to illustrate my experience with that, promote learning, have some fun, and challenge myself. Working with any tool or on any project can lead to unintended results - including injury and damage to property. Don’t work beyond your capability. In the same way I have to take complete responsibility for the outcome of my endeavours as recorded here, and my own safety and the safety of those around me - you have to do the same….. Use the information here at your own risk. Be safe, have fun, proceed with the appropriate caution for your situation….
Having your forearm over the blade allows you to apply downward force throughout the cut. Pushing from behind the blade with sticks invites the material to lift and possibly touch the rear of the blade resulting in kickback. I have hade several nasty kick backs in my 50+ years with a table saw. All were when using sticks to push. The long push shoe (J Heist style for one) is much safer. Never had a problem using this style but - when ripping narrow pieces there is the possibility of the piece tipping at the end of the cut and touching the back of the blade. And that is why I just ordered two Grrippers.
Great review, this is the best review of the Gripper I have seen on CZcams.
Thanks so much - I appreciate the comment!
I’m just learning and wanting to start using a table saw. The one that was just given to us does not have a blade guard. Hers a random thought in your 2nd concern about your forearm extending over the blade post cut. What if you stand to the left of the table, rather than behind it and feed the wood through, which elevates your arm being exposed. And you move with your push block to the left. Now your not exposed. 😄
I've been woodworking for 10-15 years now. I love my Grrripper. Seriously considering a 2nd one.
2 seems like a wise idea
Really good review. Subscribed!
Thanks very much!
Good video and thanks for sharing your thoughts. I’d forgotten that alcohol was a good cleaner to renew the grip so thanks for the reminder. I bought two of these after having a close call on the table saw. My finger touched the spinning blade and somehow I didn’t get cut more than a scratch. So very lucky! I like how the gripper puts a barrier of plastic between my fingers and the blade.
Wow that is close! Glad to hear you’re safe….
Some really good advice in this vid. :)
I'm also a new(ish) woodworker and got a table saw a couple of weeks ago and just had a gripper clone delivered today.
I didn't feel comfortable or confident with push sticks which is my reason for buying my gripper clone.
I totally get what you mean about having your forearm exposed above the blade, it is disconcerting to begin with for sure.
The very first cut with the gripper clone felt so good and came out so clean and straight.
One thing I did that you might want to think about is I made my on/off button much more accessable by mounting it to a small box that I made and fitted so that the button sits very close to the front edge of the bed so no more reaching down to hit it.
I might also add a larger hinged bit of wood that will allow me to press the off part of the button much more easily.
Hi. I’m where you are /where. I don’t use the table saw every day and keep the hairdryer on when I do . Been looking at this but could see how they can be worth £120 (full system here in uk) but I’ll keep looking as safety and confidence are vital . Thanks
I still thinking about getting one of these. At the price, you'd think it would at least be assembled. I might add, that selling accessary pieces and not including them with the initial purchase is a rip-off. And now, I understand you need two of them to cut long pieces..?
someone should invent a cut resistant arm guard/sleeve similar to cut resistant gloves that butchers often use!
I personally would not use a push stick and always use the Grr-Ripper (table saw, jointer and router table). Push sticks are dangerous and may cause off-centered pushes and increase the chances for kickback on a table saw IMHO. I like it so much, I got two. I do not use a blade guard, since so many cuts require its removal anyway. You need an out feed table with a saw table that small... gives the ability to move the workpiece all the way through and safely past the blade before you have to turn the saw off, as you reach over the cut.
...agreed on owning two Grr-Rippers - I think most folks buy a second if they like their first. While portability of 7485 is what attracted me to it - also agreed on the out feed table....
Are you that guy that used to show us all tech? You sound familiar.
Thanks for the info. Nice Video!
thanks for watching!
Thank You, great video, keep up the hard work, thnx
Thanks, will do!
hay can you tell me if the upgrade kit fits the 90 you have on yours. the parts in the upgrade kit dos not go together