How To Remove Surface Mount IC/smd IC - Learn 4 Neat Methods
Vložit
- čas přidán 23. 09. 2020
- See how to remove a surface mount IC / SMT IC using 4 great different methods with and without the use of a hot air rework station.
These 4 different methods for how to remove surface mount ic's can be carried out using a variety of standard tools so there is a method for everyone as I appreciate not all viewers will have a hot air rework station.
2 and 4 sided IC removal can be easily achieved by following these short tutorials on all 4 methods with clear guidance and tips throughout.
Please note if your IC's have a HEATPAD underneath the body you will need option 1 , the hot air pencil method.Also if you are using the 2 soldering iron method PLEASE make sure the board is not powered up when performing this option.
All these IC removal methods are proved and trusted and with some care you will easily achieve your IC removal successfully without a problem.
Finally if you found this video of use please consider my other CZcams soldering tutorials and be sure to not miss out on any future releases by subscribing and turning on the notification button.
Thank you for your time and good luck.
Mr SolderFix
#smdicremoval #icrework #icdesoldering - Věda a technologie
I'm just entering the soldering world and your tutorial really help me by a lot
Thanks for your hard works
Hi , thank you for watching the video and commenting , much appreciated . I hope you get on ok with all of your soldering projects . If my videos can help you a little then I'm happy . Thanks again and good luck 🤞
That 4th option is really genius
Hi . Thank you . The 4th option is my favourite also . It really is so easy to do this with 2 Soldering irons , and is really safe.
I love using 2 irons for lots of my rework , in fact I also have posted a video totally showing the uses of 2 soldering irons . Everyone should get a 2nd iron. Thanks again👍
I concur. I’ve been an EE for 20+ years and have never seen the 2-iron method. Well done.
Hi , thank you for your comment , much appreciated. 2 soldering irons is such a great option for some rework etc , in fact I love it so much I've posted a complete video on CZcams showing the benefits of using 2 irons in certain rework situations. Thanks again , take care 👍
Great video showing all the techniques. Appreciate it mate! for taking the time to make this video and helping others on the internet.
Hi , thank you for your comment much appreciated. Glad you enjoyed the video , if this helps a few people out it a bonus . Thank you for watching and I will be posting more videos when I get some time . Good luck 👍
Wow that 2 iron thing was a eye opener for me,never seen that before and it's just won you a new subscriber 👍👍👍
Hi . Thank you . I've done a complete video on the benefits of 2 irons (rework soldering video) , you should check it out , you'll be amazed on how good this method is . I've shown it to lots of people over the years and everyone loves it . Thanks again for your support 👍
Ditto.
Agree that alone got me to subscribe, going to look thru the video on the 2 irons right now.
Thanks much!
I used to have a gizmo for old DIP chips that did this from the other side of the board. It looked like a rows of staples that attached to your iron. You'd flip the board and heat from the bottom and the chip would fall out the other side.
If you have fast hands, you can do this with 1 iron and alternate, you got your second hand for a tweezer to remove the chip
The 2 iron method is just magic, nice and helpful methods, great work
Hi . Thank you . Glad you find the 2 iron method great . Like I always say to people , do the way you like best , but in my particular case I just love the 2 soldering iron method , that's why I made a complete video on the uses of 2 irons . If someone likes to use 1 soldering iron to remove components then that's fine by me. Thanks again for your time , much appreciated ,👍
Very nice videos and nice explanation in your channel! Very useful videos for learning soldering skills. Just about the solder wick I would say is better not to drag it on the pads but just tap it instead. In some cases, it could ruin the pads.
Some very good tips, having the right solder tip, flux, a steady hand and a microscope makes it look easy.
Hi , thank you for your comment , much appreciated. Hopefully this just shows people an option they can use with the tools they have available ( not everyone has a hot air gun ) . I'm glad you enjoyed the video , thanks again 👍
I just love the method 2. Thank you.
Hi . Thank you for watching the video, and your comment , glad you enjoyed it , much appreciated 👍
Brilliant. I’m working on replacing my first SMD when the parts come in. Thank you for the primer on the different removal processes
Hi , thank you for your comment , much appreciated. I hope you get on ok with your soldering projects , take care 👍
Very gracious of you pass on these very real skill that come experience in the field. Gold.
Hi . Thank you for your comment much appreciated. If I can help anyone then I'm happy 👍
This really helped thank you, I was trying to take ics off without a blower. This was a massive help
Thank you . Glad you found the video of use.
Brilliant. Straight up engineering skills.
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video and hopefully found it useful . Thanks again , take care 👍
I like your method #4!
Hi , thank you for watching the video and commenting , much appreciated . I'm glad you found the video useful , hopefully these methods can help a few people out . Thanks again , take care 👍
Good informative video
List of the methods shown
1. Hot air pencil
2. Cutting the IC pins
3. Lifting the individual pins one by one
4. Using two soldering irons
Hi , thank you for watching the video, very much appreciated 👍
I like how easy you make it look. I ordered a rework station and I'm going to start practicing for skill building exercise. There's plenty of throw away items to practice on. Lol
And another Great video Mate!!!Thank you so much!:) I love the 4th method!
Hi , thank you for your support , much appreciated. Glad you enjoyed the video , I use the 4th method quite a bit , as if done correctly it's perfectly safe and you can reuse the IC once cleaned up . The idea of this video was to show no matter what tools you have there's a choice to suit everyone . Thanks again 👍
Thanks for the demonstration
Hi , thank you for your comment , glad you enjoyed the video 👍
Thank you for a good and understandable video. Much appreciated!
Hi , thank you for your comment. I just wanted to show that no matter what equipment you have you are able to get this type of IC off . Thanks again 👍
Method no.2 is the one I’m going to try. Thanks.
Hi , thank you for watching the video . Good luck with all your soldering projects 👍
Thankyou very much for teaching us this skills...I dont go to an electronics school and i love electronics, and this videos are very apreciated to me. Gratings from Monterrey Mexico!
Hi , thank you for supporting my channel, very much appreciated. I'm very glad the videos have helped you , I will keep putting more videos on CZcams when I get some time . Thanks again and good luck with all of your soldering projects, take care 👍
Thanks for these methodes, very effectives, the last one is tricky 👍
Hi . Thank you for your comment , much appreciated . I love the last method and with a tiny bit of practice it's not to bad to master . Good luck 👍
Great tips every one of them, thanks for sharing.
Hi , thank you for all your support. I am glad you enjoy the videos, if they can help anyone then I'm happy. Thanks again 👍
Excellent video!! Thank you so much for sharing your knowledge!
Hi , thank you for your support of my channel and your comment , much appreciated 👍
Thanks for these tips. I hadn't considered two soldering irons before ☺
Hi , thank you for your comment, much appreciated. I like the 2 soldering iron method so much so that I posted a complete video on CZcams showing the benefits of using 2 irons. Maybe this video will be of interest to you ? Thanks again , take care 👍
Very instructive, bravo ! from France
Hi . Thank you for your comment . I'm glad you enjoyed the video , much appreciated 👍
This is a very helpful video. Thanks for posting.
Hi , thank you for your comment, I'm glad you found the video useful , take care and thanks again 👍
Amazing!!!!!!!! Thank you very much for this wonderfully informative video!!!!
Hi . Thank you , glad you found the video useful. There is actually a 5th method using a substance called Chip Quik . It's fairly expensive so that's why I didn't include it in this video , but if you want to see it used there's plenty of CZcams videos showing it. Thanks again , much appreciated 👍
Congratulations !!!! Excellent systems !!! Thank you !!!
Hi , thank you for your comment. Hopefully these methods can help a few people out with their soldering issues. Thanks again , take care 👍
Great techniques I learned a lot watching this
Hi , thank you for your support . I'm glad you found the video useful and hopefully it can help you out with your soldering projects in the future , thanks again and good luck 👍
Fantastic useful and generous. Highly professional Big thank you
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video . If I can help a few people with their soldering that's great , that's why I started my CZcams soldering channel. Thanks again and good luck with all your soldering projects 👍
Method 4 is probably going to help me thanks for the tip !
Hi . Thank you for watching . Method 4 is my favourite method and it works really well . I made a whole video on the benefits of 2 soldering irons that's how much I love this method. Thanks again , good luck 👍
1st and 4th methods are really good.Nice video
Hi , thank you for your comment, very much appreciated 👍
Thank you for these Genius ways to do this... WOW!!!
Hi , thank you. I'm glad you enjoyed the video and hopefully found it useful . Thanks again , take care 👍
Two soldering irons ! Genius !
Hi . Thanks for watching the video, much appreciated. I've done a complete video on CZcams showing the benefits of using 2 soldering irons , various examples are shown . It is the best method for lots of rework situations etc , all is shown in this video . Might be worth checking it out sometime . Thanks again 👍
You're helping me repair my Crosley. Sucks I plugged in the wrong adapter lol, but it has this same chip and it's blown. Thank you
Hi , thank you for watching the video . Glad you found it useful and hopefully it can help you out . Good luck and thanks again 👍
Great tips, thanks!
Hi . Thank you , glad you found the video useful 👍
That was very helpful thank you
Hi , thank you for your comment, I'm glad the video was of use to you . Take care 👍
very effective - and no chip quick low melt solder needed
Hi , thank you for your comment , very much appreciated . My favourite one , the 2 soldering iron method is really amazingly simple . So effective for lots of situations , in fact I've posted a complete video on CZcams showing the benefits and ease of 2 irons . Very safe Method if done correctly and no need for expensive chip quick + hot air rework stations . Thanks again and good luck 👍
Thanks for sharing. Every tip you provide is extremely helpful to us beginners. Thank You and stay safe and well Artie 👍
Hi . Thank you for your comment , I'm glad the videos are proving useful . I have plenty more soldering related videos to film and show yet , I will do some more when I get some spare time . You too stay safe and thank you again for your support 👍
@@mrsolderfix3996 thank you 😊
Hi , no problem , all the best 👍
Methods 1 and 4 are the most reasonable, I think. They're the most similar to the recomendations in the IPC 7711/7721. There are actually solder tips designed for this kind of removal as well. I wouldn't suggest using a blade near the board or putting your board through the stress of method 3.
Very very thankful I thought I need to buy a hot air gun so now i've seen your video so looks like good to me
Hi , thank you for your comment . Hopefully your soldering projects all go well , I'm sure they will . Good luck and thanks again 👍
Very good 4 way.
Hi , thank you for watching the video and for your comment , much appreciated 👍
Great video. My first experience doing this was with qfps in 1989. I was taught the "cut each leg" technique.
Hi , thank you for your comment and support of my channel , very kind of you . If my videos help a few people out then that's great . Thanks again , take care 👍
Never seen #3 or #4 before. Cool!
Hi . Thank you , glad you found the video useful 👍
nice..clean job. Thank you for such great tips.
Hi . Just wanted to share a few methods that I use myself and hopefully there's one that people can use themselves if they need to remove a similar IC. Thank you for your support , much appreciated 👍
Thank you so much!! Great video!!
Hi . Thank you . I'm glad you enjoyed the video and found it useful . Your comment is very much appreciated , thanks again👍
Great video, thanks for sharing with us.
Hi , thank you, glad you enjoyed the video 👍
Great video! Thank you!
Hi
Thank you . I'm glad you enjoyed the video and found it useful . I've tried to cover every option here so there's a method for everyone no matter what tools you have , and I've used all these methods myself so I know they all work well . Thanks again 👍
Good, best explanation, thanks for your hard work and sharing with us
Hi . Thank you for your comment, much appreciated . I'm glad you enjoyed the video and hopefully found it useful . I will post more videos when I get some time. Good luck with your projects and thanks again 👍
Very good work. Thanks sir
Hi , thank you. Hopefully there is a method there to suit everyone. Thank you for supporting my channel , very much appreciated 👍
Great vid. TYVM
Hi , thank you for watching the video and commenting , much appreciated 👍
Excellent videos
Hi , thank you for your comment, very much appreciated 👍
Great content. The hand of experience. Respect sir
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
4 was great!
Hi . Thank you for watching . Glad you found the video of use 👍
Very nice!
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video 👍
Thank you... brilliant... much appreciate the benefit of your experience
Hi , thank you for watching the video and commenting , your support is very much appreciated . Hopefully this video and the others on my channel can help a few people out with their soldering / desoldering issues . Thanks again , take care 👍
Solderers need 3 hands to exist in this world, but the 2 soldering iron method of removal is the best thing I've heard for a long time.
Many thanks for the idea!
Hi , thank you for your support , much appreciated. I love the 2 soldering iron method so much that I posted a complete video on CZcams showing some of the instances when 2 irons makes work so much easier . I have all the hot air stations etc needed to do soldering rework but at times 2 irons is so much better than a hot air station . Surrounding components for example can shift if your not careful when using hot air also plastic connectors can melt . Why protect all these when you can quickly rework with 2 irons . My best tip to anyone who solders is to get 2 irons . There are certain times when it's a godsend . Thanks again , good luck with all your soldering projects in the future 👍
Good stuff, thanks!
Hi . Glad you enjoyed the video , thanks for watching 👍
dude you’re f***ing awesome!!!
Hi , thank you for your comment , much appreciated . If I can help anyone then I'm happy . Good luck with your projects and thanks again , it means a lot 👍
Very useful
Awesome vid - a true pro
Hi , thank you for your support , much appreciated. I'm glad you enjoyed the video and hopefully found it useful . Good luck with your soldering projects and thanks again 👍
I like the 4th method :)
Hi . Thank you . I've done a complete video on the benefits of using 2 soldering irons. It's a great method that I love . Thanks again for watching much appreciated 👍
So e great ideas, thank you!
Hi , thank you for your comment, much appreciated . Glad you enjoyed the video 👍
Another interesting method we were taught in the 90's was as follows:-
1: Run a fine gauge wire down the back of one side of the IC pack and the inner facet of its pins - similar to the way a shuttle cock runs inside threads in a weaving loom.
2: Solder the tip of the wire to the last pin on the run.
3: Take the free end of the wire and while heating the pins, gently tease the wire outward and upwards.
4: Repeat this "teasing" movement along the length of one side of the IC package until all pins on the one side are free of the pads.
5: Repeat this same process for the other side of the IC pack.
6: Clean and prepare PCB accordingly for the new device.
Hi , thank you for your comment , much appreciated. It's always good to hear of other methods , the more options people can see or hear about the better in my opinion . Thanks again 👍
Good work. Thanks.
Hi . Glad you enjoyed the video , thank you for watching 👍
Perfect and usefull. Thanks you.
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video and found it useful 👍
Thanks a lot. The switch on the board of my dishwasher was broken so I had to remove it. Yet I just couldn’t remove it.
Thanks to you, I swapped it with a new one and I don’t have to deal with the damn dishes anymore.
Hi , thank you for your comment. I'm glad the video was of use to you , it's great you fixed your dishwasher .
I will always add more soldering videos to my channel when I can .
Thanks again , well done 👍
Thank you very much 💐💐💐
Hi , thank you for your comment , glad you enjoyed the video. Good luck with your soldering projects 👍
I do Marine repair and restore Muscle cars and I have done a ton of wiring, trying to learn electronics , I got one of those Radio Shack electronic kits to learn on. You my man just got a new subscriber that was totally cool and very well done you taught me a lot from one tech to another well done my man
Hi , thank you for your support of my channel , very much appreciated. I'm glad you enjoy the videos , hopefully they can help people out a little. Good luck with all your soldering projects , thanks again , take care 👍
@@mrsolderfix3996 I am in the beginning process of restoring a vintage 424 Pioneer receiver its my test guinea pig I am replacing all the caps and flush and detox the pots I have no clue what I am doing I just ordered and original shop manual from Pioneers that is at least 40 years old. I have had the unit for a long time I am excited and a little afraid but videos like yours and others it helping alot 🙂thanks for the reply and support
Hi , good luck with your project , hopefully some of my videos can help you out 👍
@@mrsolderfix3996 Thanks bud
Hi , no problems , all the best 👍
Thanx so much, great video, I've learned allot
Hi , thank you for watching the video , I'm glad you enjoyed it and found it useful . Good luck with your soldering projects and thanks again 👍
Good work .
Thanks💝
Hi . Glad you enjoyed the video , thank you for watching , much appreciated 👍
4th option is very easy . I have also made it
Great video thank you
Hi , thank you for your comment much appreciated 👍
Wow nice procedure...
Hi . Thank you . Hopefully there's a method for everyone no matter what tools they have. Glad you found it useful , thanks again 😀
the 2 soldering iron technique was great! THANK YOU!
Hi , thank you . Glad you enjoyed the video and found it useful 👍
Brilliant!
Hi , thank you , much appreciated 👍
Thank you
Hi , thank you for watching the video , much appreciated , hopefully you found it useful 👍
thank you very much
Hi , thank you for watching the video , much appreciated 👍
With the 4th method and help of God you can do many things without a heat gun. Thanxs 😁😅 I hope use this knowledge soon for in a repair at one motherboard
Hi . Thanks for watching the video , hopefully you found it useful and it can help you in the future. 2 soldering irons is a great method , in fact I posted a complete video on CZcams showing the massive benefits of using 2 irons . I hope you get on ok and thanks again 👍
Very helpful...
Hi , thank you for your comment , much appreciated. Hopefully the video can help a few people out with their soldering issues. Thanks for your support , take care 👍
You make it look so effortless! When I do it… such a mess 😂😂😂😂
Hi , thank you for watching the video and commenting , very much appreciated 👍
thank you
Hi , thank you for your comment . I'm glad you enjoyed the video and hopefully found it useful 👍
Excellent thank you will put this in use today.
Hi . Thank you for watching , much appreciated . Good luck with your projects 👍
@@mrsolderfix3996 Thank you. I used the 2 irons tip to remove a chip I’ve been afraid to take on the past month and all went well. Thank you😊👍
Hi . That's good news . The 2 iron method really works well , that's why I ended up doing a complete video on the method . Thank you for your support 👍
I'm😀😀😀 impressed.
Hi , thank you. Hopefully there's a method here to suit everyone . I realise not everyone owns hot air rework stations etc so thought I'd show other methods that don't need hot air . Thanks again , take care 👍
Thanks champ….now i can remove SMTs that i messed up with solder.
Hi , thank you for your support , much appreciated . I'm glad you found the video of use . I will post more when I get some spare time , thanks again and good luck with all your projects 👍
It is really good.
Hi . Thank you for your comment , glad you enjoyed the video 👍
Just used a variation of your method 4 to remove a sop 8 ic. Blob of solder on both sides to connect the leads, use a large chisel tip iron, then alternate back and forth heating the solder on both sides until they melt and the ic slides off. I imagine it would have been easier with two irons, but only had one and didn't take hardly any time. I can't recommend a good flux paste though; without my solder was sticking everywhere it could.
Cheers
Hi , thank you for watching the video , much appreciated. The way you have done it is a perfectly ok way , lots of people do it this way , even I have , but it just makes it a little easier and safer with 2 soldering irons . Thanks again , take care 👍
good work
Hi , thank you for your comment. I'm glad you enjoyed the video , thanks for watching 👍
I like the 4th option
Hi . Thank you for watching , much appreciated. Yes I also prefer the 4th option as it's so easy . I've done a complete video on the uses of 2 soldering irons , it really shows off how easy it can make some rework . Thanks again for your time 👍
Great video
Hi, thank you for your comment, much appreciated. I'm glad you enjoyed the video . Hopefully there is a method here that can help people out , with or without a heat gun . Thanks again , take care 👍
@@mrsolderfix3996 yes definitely… I scratched the substrate and ruined traces when I removed the CPU IHS on my PS3. Im hoping to fix it using some of these great tips from your channel. Im totally new to soldering and curious to learn. Thanks again.
Hi , thank you for supporting my channel , very much appreciated. Hopefully my videos can help you out with some of your problems . If they can then that's great . Thanks again , good luck with everything 👍
GREAT!!!
Hi , thank you for watching the video and commenting , very much appreciated 👍
Really great. Thank you very much 🙏
Hi , thank you for your support . I'm glad you enjoyed the video, hopefully it will give people a few ideas to remove their components . Thanks again and good luck with all your future soldering projects, take care 👍
@@mrsolderfix3996Thank you very much.
Good night
I like this method one and three
Hi , thank you for watching the video and commenting , much appreciated 👍
Thanks dor idea😁
Hi . Glad you enjoyed the video and found it useful 👍
Good to see I wasn't the oddball doing such things without thousands worth of equipment. Two irons are always ready on my bench.
Hi , thank you for your comment , much appreciated. I love the idea of 2 irons , in fact I've posted a complete video on CZcams showing the benefits of using 2 irons . Thanks again 👍
I've employed #4 to success.
Hi , thank you for your comment, much appreciated. I do like method 4 , in fact I use 2 irons for reworking quite often . I've also posted a complete video on CZcams showing the benefits of using 2 soldering irons, perfectly safe and less invasive sometimes than a hot air rework station . Thanks again , take care 👍
I think you're the Bob Ross of soldering
Hi , thank you for your comment, much appreciated. I'm glad you enjoy the videos , I will be posting more when I can , it's nice to know they are appreciated. Thanks again 👍
Thanks
Hi , thank you for watching the video and commenting , much appreciated 👍
Thanks for the excellent tutorials. On another channel the guy removing a component said that using a hot air gun might damage the VIAs on the board if you're not careful and use too much heat. I suppose you make sure you keep circulating the hot air around until the solder melts(?)