How to unbrick Oneplus 6 & 6t | Stuck in Crashdump & fastboot on unlocked bootloader

Sdílet
Vložit
  • čas přidán 21. 08. 2024
  • Unbrick Oneplus 6/6t Android 11 | Resolve Crashdump mode & bootloop
    #oneplus6 #oneplus6t #unbrick #crashdump #android11 #android12 #MagiskManager #OxygenOS11 #StableBuild #Openbeta #oxygenos11
    #bootloop
    In this video i have shown how you can recover or unbrick your oneplus 6 and 6t device easily.
    Don't click here: bit.ly/2RHX5AP
    Telegram link : TechieUjjaval
    t.me/TechieUjj...
    Downloads:
    MSM Tool for Oneplus 6:
    androidfilehos...
    MSM Tool for Oneplus 6t:
    androidfilehos...
    Oneplus device drivers:
    forum.xda-deve...
    Solve fastboot driver problem:
    • How to fix Fastboot de...
    Oneplus Device driver:
    androidfilehos...
    Alternate device driver:
    androidfilehos...
    Other useful videos:
    OP6/6T Oxygen OS 11.1.1.1 Review:
    • Oneplus 6 & 6t Stable ...
    OP 6/6t rooting of 11.1.1.1 update:
    • Root & unroot OP6/6T O...
    OP6/6T Android 11 stable build review:
    • Oneplus 6 & 6t Oxygen ...
    OP6/6T Gaming review after android 11:
    • Oneplus 6 Android 11 B...
    OP6/6T full review after 2.5 years:
    • Oneplus 6 review after...
    OP6/6T Open beta 3 to Stable build:
    • Roll back Oneplus 6 & ...
    OP6/6T brightness issue resolve:
    • Oneplus 6/6T Brightnes...
    OP6 Android 11 TWRP:
    • How to install TWRP & ...
    OP6/6T Android 11.0 Root & Magisk:
    • Root Oneplus 6 & 6T An...
    OP6/6T Android 11 OB2 Full video: • Oneplus 6/6T Oxygen OS...
    Download link for Android 11 open beta hot fix update : bit.ly/3eCe2F5
    Roll back from Android 11 to Android 10 : • OnePlus 6 & 6t Downgra...
    Download magisk:
    magiskmanager....
    Telegram link : TechieUjjaval
    t.me/TechieUjj...
    OP6/6T Stable Oxygen OS 11 full video:
    • Oneplus 6 & 6t Oxygen ...
    Install Android 11 stable from Android 11 Open beta 3 :
    • Roll back Oneplus 6 & ...
    Roll back from Android 11 to Android 10 : • OnePlus 6 & 6t Downgra...
    OP6/6T Android 11 OB2 Full video: • Oneplus 6/6T Oxygen OS...
    Download link for Android 11 open beta hot fix update : bit.ly/3eCe2F5
    Roll back from Android 11 to Android 10 : • OnePlus 6 & 6t Downgra...
    If you like my work plz hit a like and share the videos, also you may subscribe my channel for future updates.
    Jai hind!!!

Komentáře • 1,2K

  • @TechieUjjaval
    @TechieUjjaval  Před 11 měsíci +3

    To all who are getting problem in installing drivers can follow this page :
    forum.xda-developers.com/t/tool-tool-all-in-one-drivers-unlock-twrp-factory-image-stock-recovery.3358711/

    • @sandpnyk
      @sandpnyk Před 9 měsíci

      didnt help for driver... simply denied to install driver for my oneplus 6t

    • @TechieUjjaval
      @TechieUjjaval  Před 9 měsíci

      @@sandpnyk this should not happen

    • @Praveee306
      @Praveee306 Před 9 hodinami

      Comming downloading op2. Img failed😢.

  • @newsupdated7982
    @newsupdated7982 Před 2 lety +20

    Oneplus 6. I'm in America, couldn't understand 90% of what you were saying, even still, your instructions worked for me. Thanks. 👍

  • @pmmadhyastha3607
    @pmmadhyastha3607 Před rokem +4

    Today 19.08.2023, I just followed the instructions on my OnePlus 6 which went into Crash dump mode. It just restarted totally fresh. Simply Great. Mobile repair shop told it may cost Rs 2,500/-. Off course motherboard should be healthy. Thank you Sir.
    I have downloaded MSMDownloadTool V4.0 International (Oxygen OS 5.1.5) from XDA
    and OnePlus 6 USB Driver and just followed the instructions.

    • @user-jv4ub1xe2l
      @user-jv4ub1xe2l Před rokem

      Bhai data delete ho jata h kya

    • @pmmadhyastha3607
      @pmmadhyastha3607 Před rokem

      Yes. But phone will work as good as new.

    • @prasaddinkar9335
      @prasaddinkar9335 Před 11 měsíci

      Hi, after flashing is it original OP OS or custom one?

    • @NileshSontaper
      @NileshSontaper Před 9 měsíci

      bhai ye sabhi kary macbook me hoga kya

    • @aa54785
      @aa54785 Před měsícem

      ​@@pmmadhyastha3607Bro really will it work?

  • @muralikrishna7905
    @muralikrishna7905 Před rokem +3

    I suggest all the ppl to follow this who are facing this crashdump mode on there phone. I've had the same issue with my oneplus 6 and visited the oneplus store. The representative in the store mentioned me that this is due to hardware issue and might not be possible to fix the phone. I was also informed that will check by updating the software and that to 10% assurance about fixing the phone. Waited for 30 mins and was informed that the phone is not working even after updating the software and asked me to change the hardware of the phone which cost for 27000/-. I took my phone and came back home. I was supposed to order a new phone within budget but I tried to google few videos and saw this video. It worked for me and I'm glad that my phone is working.

    • @KDTechverse
      @KDTechverse Před rokem

      Hello brother can you elaborate step by step what did you do ? Mainly which version of oxygen os did you flash and the Qualcomm drivers which you installed ?
      Which windows os did you use ? 10 or 11 ?
      Did it work for you right away or did it take some some time for you to get it working ?
      Any special key combination you used apart from pressing vol up while connecting the phone to the PC ?
      Anything crucial which you think I might be missing ?
      @Techie Ujjaval your inputs would be valuable as well if any ?

  • @jackdaw3578
    @jackdaw3578 Před 2 lety +23

    this method worked perfectly! i installed pixel experience rom with twrp but somehow twrp got removed and only pixel experience recovery remained, i tried installing twrp again but it was going into crash dump, this video helped alot! also plug your phone to the 2.0 port of your laptop/pc. cheers!

    • @huzaifquazi
      @huzaifquazi Před 2 lety

      Good , I actually had to take it to service center for repair

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      👍

    • @omvirchahar8378
      @omvirchahar8378 Před 2 lety

      @@TechieUjjaval where is the link for MSN and drivers?

    •  Před 2 lety

      That's exactly what I'm trying to do also. I'm on PE12 with Pe recovery installed but I wanna install twrp so I can move on to flash Evox Rom but it returns this crash dump page every time.

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @ your device?

  • @elianfernandes9390
    @elianfernandes9390 Před rokem +58

    2mins silence for OnePlus User who got crash dum mode and changed the motherboard for 20k+ 🙏

    • @simpleman5912
      @simpleman5912 Před rokem +1

      Kaise thik hoga ye bata do...

    • @elianfernandes9390
      @elianfernandes9390 Před rokem +1

      @@simpleman5912 video mai jo kiya hai vo thikse karo.... Ho jata hai

    • @elianfernandes9390
      @elianfernandes9390 Před rokem +2

      @@simpleman5912 agar phir bhi na ho tho local shop mai jao vo log 2k mai IC change kar k denge jisse problem solve ho jata hai

    • @rishikeshmudhiraj844
      @rishikeshmudhiraj844 Před rokem +1

      Me 😒😒😒😒😒

    • @v4nquished
      @v4nquished Před rokem

      Brother mere me jaise Mai pc se mobile ko connect karta hu to apne aap fastboot mode khul jata hai power off nahi hota to maine cmd se flash kar Diya tha waise bhi ho jata hai par mere me software install hone ke bad bhi mere me fastboot mode hi khulta hai Mai jab apna phone ka bootloader unlock karta hu to crash dump mode dikhata hai jaise band karta hu to crash dump mode nahi dikhata
      Dukan wale bhi yahi bata rahe mere sath bhi yahi ho ra

  • @deadflex8327
    @deadflex8327 Před 2 lety +9

    Helped me unbrick my OnePlus 6T Thank you so much!! A life saver really ❤️

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety +1

      thanku somuch 😊😊😊

    • @ronakkumar8141
      @ronakkumar8141 Před 2 lety

      Hey, please tell me i m getting only com3

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @@ronakkumar8141 com 3 connected?

    • @ronakkumar8141
      @ronakkumar8141 Před 2 lety

      @@TechieUjjaval yes it com 3 what should id o

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @@ronakkumar8141 connect hone ke bad start click kro and follow as per video...

  • @jayeshl
    @jayeshl Před rokem +2

    Bhai 😭 thank you so much was going to exchange this but crashdump aa Gaya, found your video and it’s fixed, for me it failed 2 times coz usb 3.0 when I switched to usb 2.0 it working 🙏🏻 thank you

  • @txukulun1
    @txukulun1 Před 2 lety +1

    This method works wonderfully, step by step, thanks to the video I was able to save my mobile. Thanks from Spain.

  • @KDTechverse
    @KDTechverse Před rokem +5

    Hello brother can you elaborate step by step what did you do ? Mainly which version of oxygen os did you flash and the Qualcomm drivers which you installed ?
    Which windows os did you use ? 10 or 11 ?
    Did it work for you right away or did it take some some time for you to get it working ?
    Any special key combination you used apart from pressing vol up while connecting the phone to the PC ?
    Anything crucial which you think I might be missing ?
    Update : it was a hardware issue guys had to get it repaired temporarily but it won't last long so better if you could just backup and restore the data and buy a new phone then transfer it to the new one.

    • @aalennn1
      @aalennn1 Před rokem

      did you find anything that work?

    • @Nunya58294
      @Nunya58294 Před 7 měsíci

      Moron.​@@aalennn1

  • @praveenpancharia
    @praveenpancharia Před 2 lety +4

    Hi, I have tried running the entire process and got succesful complete message on MSM. My Oneplus 6 still showing CrashDump mode message. Anything further I should try now?

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      Sorry you need to check by local repair shop then.

    • @Mukesh-gf6gp
      @Mukesh-gf6gp Před 2 lety

      Same issues with me plz suggest me also

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety +1

      @@Mukesh-gf6gp try this method first

    • @rachit689
      @rachit689 Před 2 lety

      Bro kisi ne karwaya hai repair abi tk kaise chal rha hai

    • @kazisharminara7535
      @kazisharminara7535 Před rokem +1

      Did you find a solution? I tried the method but it is still not working and phone is going to crush dump mode again.

  • @vimalpithwa4149
    @vimalpithwa4149 Před 2 lety

    o bhai.... jaan daal di tune phone me... aaj teri method 1000000% work kar gai... thankyou so much bhai...

  • @milanpaulas6878
    @milanpaulas6878 Před rokem +1

    Broooo it worked perfectly without any issues well done bruh❤

  • @AshishGopal
    @AshishGopal Před rokem +5

    Hi Ujjaval, My OP6 went into CrashDump Mode way back in 2020, and back then there was no solution on the internet when it occurred. I still have hopes to recover the phone and have tried various MSM techniques. I read somewhere that this MSM file that you've attached will definitely work and have still kept my hopes high.
    The problem is, I face Sahara Comm Error when I use Vol Up and connect the charger. After the first error, the laptop refuses to detect my phone on reconnecting the USB. I have tried it on two different laptops and the same issue persists. I am not sure how to go ahead with it, Kindly help!

    • @nashkhanful
      @nashkhanful Před rokem +1

      Press volume up and volume down together, before connecting to usb. Then open the msm application and it will detect your device. Without still leaving the buttons, press start. Once the download starts, you may now leave the buttons and the rest is there in the video. This should help. Cheers.

    • @ihimanshum
      @ihimanshum Před rokem

      Just press the vol up+power while MSM process is going on and says firehouse/sahara communication failed once you press them it will start flashing

    • @dinakarparimi9461
      @dinakarparimi9461 Před rokem

      ​@@ihimanshumafter the process exactly as u said....still it's showing qualconn dump😮

  • @aravfernandez
    @aravfernandez Před rokem +2

    WORKS !!

  • @shreyamorbale8504
    @shreyamorbale8504 Před 10 měsíci +1

    Hii.. After pressing the volume button and connecting the phone with laptop via cable.. It isnt showing quallcom in the ports... Instead its showing intel(r) active management technology - sol (com3)... And when tried to update the drive.. Shows that it has the ebst drives already installed

  • @joynalabedinsanto9656
    @joynalabedinsanto9656 Před 2 lety +4

    if sahara communication failed then press volume up and power button thank me letter 😊

  • @bogdanb7383
    @bogdanb7383 Před rokem +5

    Mulțumim!

    • @TechieUjjaval
      @TechieUjjaval  Před rokem +1

      thank u somuch

    • @piyushpal4544
      @piyushpal4544 Před rokem +1

      @@TechieUjjaval sir download complete hone ke baad doobara crash dump mode me jaa rha h

    • @stelladevelopers3897
      @stelladevelopers3897 Před rokem

      Same for me, did you find any solution? @@piyushpal4544

  • @sandeepkumarsihmar
    @sandeepkumarsihmar Před 2 lety +1

    I started the process in msm tool but it is struck on param preload in status of communication
    Green led is glowing though

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety +1

      retry is the only option. Also ise usb 2.0 port

  • @sagarchandraOfficial
    @sagarchandraOfficial Před rokem

    Thnk you bhai 1 saal se pada tha aaj kr ke dekha thik ho gya thnk you bhai ❤

  • @BrightPhoenix271
    @BrightPhoenix271 Před 10 měsíci +1

    After successful download, phone has again booted into crash dump mode.
    Help

    • @TechieUjjaval
      @TechieUjjaval  Před 10 měsíci

      its hardware issue them ask local repair shop for ic reballing

  • @ravigm1952
    @ravigm1952 Před rokem +1

    Still not working OnePlus 6

  • @meowsbarks6566
    @meowsbarks6566 Před rokem +1

    Thank you so much bro, you saved me. I was searching for a solution since three hours, and you just saved my ass.

  • @shivakrishna673
    @shivakrishna673 Před 7 měsíci +1

    everything is fine ,,,, but where can i find this port option i couldnt see it in my laptop while connected to device manager. why ???

  • @challarevanth6313
    @challarevanth6313 Před rokem +1

    Unable to download the MSM tool and drivers for oneplus 6 from given links. Showing "origin is unreachable". Please help!!! My oneplus 6 is bricked

  • @ajaygill2179
    @ajaygill2179 Před 2 lety

    bro apki video dekh krr maine phone unbrick kiya varna company wale tonh keh rahe the ki 22000 rupees lage geh thnkyou brother so much

  • @snkmr42
    @snkmr42 Před rokem

    thank you brother for making this video, every method you shown works perfectly in a single try , today I unbrick by op6 today, thanks again I appreciate you work.

  • @Kartik2611
    @Kartik2611 Před 2 lety +1

    thnku bhaiya G bacha lia warna abhi service center waale bhot pese maang lete xd

  • @Durgeshshukla3004
    @Durgeshshukla3004 Před 2 lety +1

    I followed the process twice and after that my one plus 6 got completely dead. What to do now, any suggestions ?

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      its hardware problem then go for local repair shop and ask for ic reballing

  • @bhavnaahuja62
    @bhavnaahuja62 Před 2 lety +2

    Sir all of sudden,phone went to crash dump mode.Went to service center, they are asking for motherboard replacement. Can your please guide

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety +2

      thats the issue coming in OP6/6T after android 11 updates...You can try msm tool if that recover..but right now in all cases i have heard for locked bootloader its not reviving the device. Waiting till some msm tool come for android 11 as well may be that will be able to recover the device. Which update version was there on your phone btw...11.1.1.1 or 11.0?

  • @zorofans8429
    @zorofans8429 Před 2 lety +1

    Thanks bro…it works…jai hind jai Bharat 🇮🇳

  • @ritu_maheshwari
    @ritu_maheshwari Před 2 lety +2

    sir i got sahara error everytime...what should i do

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      use usb port 2.0 for connection with pc. also restart once your pc.

  • @niteshmadhavi358
    @niteshmadhavi358 Před 2 lety +1

    it works. really mean alot , thankyou so much

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      welcome

    • @rajeshfitnessmantra
      @rajeshfitnessmantra Před 2 lety

      hi bro could u please tell me how to do it i followed same process still i am getting sahara error in msm tool

  • @sanchitakhauri5579
    @sanchitakhauri5579 Před 2 lety +1

    The process seems to be working fine. MSM tool seems to unbrick my Oneplus6 phone but still the issue remains. I am still getting QUALCOM CRASHDUMP. Does it mean that there is something wrong with the hardware? My phone is almost 4 years old now.

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      yes may be... ask local repair shop for ic reballing

  • @anilmalik9597
    @anilmalik9597 Před 6 měsíci

    i have gone through the same process, but after reboot my phone is not starting, again and again this get restart, what should i do now

  • @luckythakur3020
    @luckythakur3020 Před 2 lety

    Bhai Mera one plus 8t vhi off ho gyaa hai bilkul simple use main.
    Care center wale bol re ki bord change hona.
    Phone m bhi Qualcumm crashdump mode aa raa😭😭😭😭😭😭plzz help me.

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      agar on kar paa rhe ho phone to android 10 me downgrade krlo kuch nhi krna padega

  • @gauravbhanushali5669
    @gauravbhanushali5669 Před 9 měsíci

    Worked well ! Thanks

  • @AnkitKumar-xu6dc
    @AnkitKumar-xu6dc Před 2 lety +2

    Hello bro, I have did the same steps and even everything completed successfully but still same problem is there, i did the process twice.
    Please help me. It will be big thanks from me. Please
    My device is Oneplus 6

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety +1

      if still crashdump is coming, then please get it checked with some local repair shop to reballing the IC. Since customee care will going to ask for motherboard replacement only.

    • @AnkitKumar-xu6dc
      @AnkitKumar-xu6dc Před 2 lety

      @@TechieUjjaval Is there any chance to fix through any other OS or somthing. Please help bro amd thanks for your reply bro, really appreciated

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @@AnkitKumar-xu6dc check if your can be booted to fastboot mode

    • @yng3ihAq
      @yng3ihAq Před 2 lety

      @@TechieUjjaval HI i am have had the same issue, even after the process it still goes to crash dump. i can go to fastboot mode but boot loader is locked and recovery mode also goes to crashdump mode. Please help

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @@yng3ihAq then check it through local repair shop brother

  • @tejapoosa8918
    @tejapoosa8918 Před 2 lety +1

    i followed this video all went well but at end after 193 seconds it shows download complete but sahara communication failed and in phone it shows again crash dump mode
    PLZZ HELP!

  • @asakyuu
    @asakyuu Před 2 lety +1

    my OP6 wont open and the led light color is blue any suggestions?

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety +1

      what happened to your device

    • @sumanththikka1506
      @sumanththikka1506 Před 2 lety +1

      @asakyu same issue please help please. How ur problem solved??

    • @asakyuu
      @asakyuu Před 2 lety

      @@sumanththikka1506 nothing worked i just switched to pocof3 bought it on Christmas sale

    • @sumanththikka1506
      @sumanththikka1506 Před 2 lety

      @@asakyuu bro 35k loss for OnePlus 6 😭😭

  • @fazilshaikh3884
    @fazilshaikh3884 Před 10 měsíci

    Bina data loss kiye maine kiya h easy steps h janna h toh comments kro.. or haa kch der k liye means 1 2 hour k liye chalu hoga wps fir issue ho skta h.. repeat krna padega process.. mai recommend kruga dusre phone me data transfer krlena easy share k through

  • @LyDenQuinn
    @LyDenQuinn Před 5 měsíci

    hi, i tried 2 times already, followed your instructions and the download completed from MsM tool. but the phone is still in crash dump mode. can anybody help please. thank you.

  • @anirudhagarwal2482
    @anirudhagarwal2482 Před 10 měsíci

    I followed the steps after it nothing on screen its black its not even booting up to that crash dump mode or any screen

  • @dhinchakmovie2648
    @dhinchakmovie2648 Před rokem

    I am solve this problem in 1min first steps press volume+ or power buttom and our phone is off and on your phone showing fastboot and press power buttom 5sec and your on proper
    This tricks work only OnePlus 6t phone only works

  • @shadmaansk9317
    @shadmaansk9317 Před 7 měsíci

    My one plus 9 device had gone crashdump mode but after so many reboots from bootloader , it start. So should l do this process or flash it orr should ignore this ? Please tell

  • @devsharma6826
    @devsharma6826 Před rokem

    thankkk youuu brotherrr helped me unbrick my op 7t

  • @SHAiLU0728
    @SHAiLU0728 Před 7 měsíci

    Download complete hone ke baad mera phone reboot nhi hua aur uske baad ab khul bhi nhi rha... kya problem ho skti hai?

  • @sanjutigga690
    @sanjutigga690 Před 2 lety +1

    All process done but still showing Qualcomm crash

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      check at some local repair shop and ask for ic reballing.

  • @SACHINYED
    @SACHINYED Před 2 lety +1

    Thanks sir for flash file and drivers love u

  • @anandamurugansuyambulingam995

    Hi Bro.. i tried like you said. but when i connect the mobile with USB , in the Port its not reflecting.. please advise how to proceed further. @Techie Ujjaval

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety +2

      check drivers installed or not correctly. Also after installing drivers restart your PC. & connect your device with usb 2.0 port of your PC

    • @nishijain9575
      @nishijain9575 Před 2 lety +1

      @@TechieUjjaval Not happening for me as well. can you help. There is 3.0 USB port in my laptop.

  • @kamaalsayyed5798
    @kamaalsayyed5798 Před rokem +1

    My device is connecting on other devices not on port section what should I do.

    • @TechieUjjaval
      @TechieUjjaval  Před rokem

      czcams.com/video/qTNvcmSI_pw/video.html
      checkout this video

  • @Trreii
    @Trreii Před 2 lety +1

    Bro I don't have twrp, OEM unlocking or anything on my phone. It got stuck out of nowhere will I be able to fix it

  • @p4bli702
    @p4bli702 Před 6 měsíci

    i didn't understood a single word you said, but somehow i undestood it anyways

  • @Nikhil_Sahu_G
    @Nikhil_Sahu_G Před 15 dny

    Will it work if bootloader is locked? cause it just bricked by its own

  • @Blinkstayy
    @Blinkstayy Před 2 měsíci

    Sahara communication failed hi bataye jarha hai tried every fix you told in the video but still the same thing what else can i do?

  • @jugaaaad
    @jugaaaad Před 9 měsíci

    ujjval sir, maine peechle din apne 6t ka bootloader unlock kiya uskebaad wapas se fastboot mai anney ke baad recovery (boot.img from LineageOS - Nightly07112023--version) flash krne ke baad maine "START" wale option ko select krke power button press krdia uske baad se 6t constinously boot ho rha hai aur ye message show ho rha hai. "The boot loader is unlocked and software integrity cannot be guaranteed. Any data stored on this device may be available to attackers. Do not store any sensitive data on the device. PRESS POWER KEY TO PAUSE BOOT" aur koisa bhi button work nahi kr rha hai.
    Kia aap meri help kr skte ho. Please help find what happened?

  • @anujahuja458
    @anujahuja458 Před 2 lety +1

    Sir, in fastboot mode it is showing bootloader as locked. Tried oem unlocking, nothing happened because I didn't enable it in the developer option earlier. Can you please guide?

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      if oem unlock not able in developer option then this command will not perform.

    • @chethanb.m4855
      @chethanb.m4855 Před rokem

      @@TechieUjjaval same issue mine also, is there any alternative option..

  • @journeywithbipaarfin7898

    brother understand everything but saying to shut down my phone. but am not getting as its fully black not openning or anything

  • @user-fj8wt9tp8z
    @user-fj8wt9tp8z Před rokem

    Ujjaval after doing the same process still the phone is not booting. and the driver and bootloader are not working and the given link is not available.

  • @Chico390
    @Chico390 Před 7 měsíci

    Bhai i did the Qualcomm update it got updated but when i am intersting again it is showing device not recognised please help

  • @Sravankumar.
    @Sravankumar. Před 2 lety +1

    what is the meaning of device state - locked. Even after doing all the steps phone didn't rebooted. pls suggest wat to do now.

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      locked means your phone bootloader is locked. If ater doing this process phone is not booting up then contact some local repair shop. If you go to service center they will ask for aroung 15k

    • @georgeeapen87
      @georgeeapen87 Před 2 lety

      @@TechieUjjaval if phone bootloader is locked , is there no way to boot up again?

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @@georgeeapen87 actually it should boot but in locked bootloader for android 11 msm is not working right now.

  • @louiemagnaye6707
    @louiemagnaye6707 Před 2 lety

    Wow its work perfect .
    Thanks bro

  • @RUSHYOURADRENALINE
    @RUSHYOURADRENALINE Před 2 lety +1

    thanks bro you saved my lifeee

  • @K1ng_RAM
    @K1ng_RAM Před 3 měsíci

    hey i am not getting any green status bar and in status of communication its showing PARAM PRELOAD only and nothing is changing. Plz help brother 🙏🙏🙏🙏

  • @augustinemathew645
    @augustinemathew645 Před 27 dny

    After this process phone couldn't open what I do...¿¿¿¿ 😢😢😢

  • @gojotakito
    @gojotakito Před rokem

    i followed your step, everything worked perfect like , device showing connected, mobile green light was on while downloading , but after the all things , my oneplus 6 isnt opening, i tried twice times , kindly help

    • @TechieUjjaval
      @TechieUjjaval  Před rokem

      there is hardware issue then check at some local repair shop once.

  • @sauravyadav489
    @sauravyadav489 Před 2 lety

    Thanks man it worked.
    love you bro

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      welcome

    • @sauravyadav489
      @sauravyadav489 Před 2 lety

      @@TechieUjjaval Seriously Bro I have tried multiple method Received failure everywhere but Your method worked in Single Go... Thanks Man

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @@sauravyadav489 happy your device saved

  • @williamuk9201
    @williamuk9201 Před 10 měsíci

    Mine work after i press power button + volume down for long time even if show the issue again
    Do it multiple times
    Might work but not guaranteed

  • @dukesec
    @dukesec Před 8 měsíci

    My volume up botton damaged . How i can fix brick. How i can boot EDL mode without volume up button??

  • @alucard206
    @alucard206 Před rokem

    the drivers for windows do not work, I try all the versions, restart the pc, connect the phone to the usb 2.0 with all the methods (press the volume button).
    My Pc can't see the phone. the Qualcomm HS-USB does not appear, and therefore I cannot go further.
    My phone never turns on, it arrives either on the dumb qualcom crash, or with a volume up button start, I arrive on a boot menu.

  • @prithvirajsamajpati2926
    @prithvirajsamajpati2926 Před 2 lety +1

    Same issue with my mobile bootloader was locked.. how to do ??

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      try to unbrick through this tool if that helps you. Else contact some local mobile repairing shop.

  • @nikhilgameing524
    @nikhilgameing524 Před rokem

    mere mobile gir gya tha to display pura black ho gya
    to bhot bar blue light blinking kr rha he yr such smjh nhi aa rha kyu ho rha esa

  • @koolgenius
    @koolgenius Před rokem

    my oneplus 6 started to restart and then showed crash dump, wiped cached and factory reset and it started but then it would just turn off n keep doing that so i followed this video and it was a success and phone booted again and start to restart every few min after this process, factory reset everything, wiped cached etc, updated to stock os 11 and installed all app back and now it has once again started to restart, i did not do any experiments and was just using my phone regularly on stock os 11, is this the end of my phone?

    • @TechieUjjaval
      @TechieUjjaval  Před 11 měsíci

      i think yes.... there would be motherboard problem

  • @jean.digner
    @jean.digner Před 8 měsíci

    Hello, is there any way to access the files in this part, before doing these procedures, copy the data??

  • @voyad5866
    @voyad5866 Před 2 lety

    This is the second time I was on your channel to find a solution for my oneplus 6 and Ujjaval you are the best! Good explanation and clear steps!! liked and subscribde 👌👍

  • @user-yo3oq1yn9u
    @user-yo3oq1yn9u Před rokem

    My OnePlus 6t crashdump your file not download
    How to download msm ???

  • @vincentg8936
    @vincentg8936 Před 2 měsíci

    doesn't work for me, oneplus 6 is dead after 6 years I guess :(

  • @nimeshisadara1177
    @nimeshisadara1177 Před 2 lety

    My OnePlus 6 having same issue and i went to service center & after receiving from service centre my phone screen went black nothing is happening. Before that i am getting crashdump error and boot animation but not nothing is happening. Screen only lit up when battery is too low. Any idea about that and also i tried msm tools twice but nothing is appearing on screen

  • @PratikMohanty3
    @PratikMohanty3 Před 2 lety +1

    Hi bhaiya..I downloaded the files from the link and i installed the driver but there is no qcser folder as shown in the video and moreover when im trying to update the driver from port section as you have shown its showing latest driver installed..so im unable to figure out which folder to select while updating and one more thing even though im unable to update it but in msm its showing connected but green light doesn't blink and after 15s sahara connection failed even though i have used usb2.0

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      there is no drivers issue... you plz try 4 5 time it happens many times tht sahara communication failed

    • @PratikMohanty3
      @PratikMohanty3 Před 2 lety

      @@TechieUjjaval the phone got unbricked but now after rebooting the screen turns black and blue led gets on..please help

    • @krishnapavani1873
      @krishnapavani1873 Před rokem

      Hi bro, my status communication shows " param preload " what does it mean you said 240 sec to complete, but it goes to unlimited secs what is the solution for it

  • @rekhashanbhag4682
    @rekhashanbhag4682 Před rokem

    Pc says the required driver is already installed in Ports i tried updating

  • @phuriphatboss6338
    @phuriphatboss6338 Před rokem

    Is all of information in the phone still the same?😭

  • @ahzam2
    @ahzam2 Před 23 dny

    Bro,my device manager isnt showing any ports option

  • @fun-native1216
    @fun-native1216 Před 2 lety

    Windows encountered a problem installing the drivers for your device….it’s showing like this, while updating drivers, please help my phone suddenly get into crash mode

  • @pranayt1718
    @pranayt1718 Před rokem

    i have done everything correctly but after the completion of download my mobile didnt start and its not even showing crashdump image too what should i do now?

    • @TechieUjjaval
      @TechieUjjaval  Před rokem

      check at local repair shop its hardware issue. go for ic reballing

  • @hiddenseedsproduction1907

    After running Msm tool, it was successfully completed and my phone was restarted but still same error showing. please help @techieUjjaval

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      then get it repair through local repair shop. IC reballing required.

  • @e-learnuj5516
    @e-learnuj5516 Před 2 lety

    I've did all the instructions , and msm say proccess complete , but when the phone boot up , black screen is appearing

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      Crashdump aaya tha isse pahle kya?

    • @sharonnelson5540
      @sharonnelson5540 Před 2 lety

      @@TechieUjjaval Yes same issue with me... did all the process getting crash dump again.

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      @@sharonnelson5540 this update is buggy a lot of people getting this error and not getting resolved through msm tool...check with local technician once else service center guys telling to replace motherboard

  • @ryanalcantara373
    @ryanalcantara373 Před rokem

    I tried this, but the phone keeps going back to crashdump mode even after doing the MSm step
    it rebooted back to crashdump mode
    help im begging you

    • @TechieUjjaval
      @TechieUjjaval  Před rokem

      Go and check with local technician for ic reballing of processor

  • @vedprakashsoni6425
    @vedprakashsoni6425 Před rokem

    Hi, I've gone through the steps, download is completed but and it gets restarted but still it shows same crashdump mode.
    It is not working, help me on this.

    • @TechieUjjaval
      @TechieUjjaval  Před rokem

      means crashdump is on hardware level.. check with local repair shop and ask for ic reballing

  • @masnabhat4951
    @masnabhat4951 Před rokem

    Not able to locate the driver ..not able to update it too

  • @amitatlp
    @amitatlp Před 2 lety

    After doing all these steps, the phone still boots up in crashdump mode again. Does that mean there is hardware problem?

  • @khursheedalam7858
    @khursheedalam7858 Před 2 lety

    Hello Brother, Very lovely video. Gave me a hope of not loosing 42000. I have one plus 8T. My phone suddenly got off while in use. Now not even showing any response, no factory mode, no vibration, nothing. Do you think it got bricked ? Do you have link for drivers for one plus 8T.

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      www.droidwin.com/unbrick-oneplus-8-pro-8t-msm-download-tool/
      read this thread and try process is almost same as shown in my video. but tool file is different only

  • @retrodestiny
    @retrodestiny Před 2 lety

    Super bro. Life de di tumne to....

  • @saipoojari1871
    @saipoojari1871 Před 2 lety +1

    Hi Sir, Recently my Phone have same issues with Crash Dump mode,Can u give Drivers and MSM tool links Please Sir 🙏
    Model : OnePlus 6

  • @FarzanaFaizaBushra
    @FarzanaFaizaBushra Před rokem

    Hi, After completing the whole process and seeing the download to complete my OP 6 is going back to crash dump mode. :( Why is that?

    • @TechieUjjaval
      @TechieUjjaval  Před rokem

      its hardware issue then.... go for ic reballing from local repair shop

  • @joynalabedinsanto9656
    @joynalabedinsanto9656 Před 2 lety

    ujjaval bro thank u very very much 😣💙💙💙

  • @crazydevil8018
    @crazydevil8018 Před měsícem

    Bro your great 👍

  • @sritejkadiveti330
    @sritejkadiveti330 Před rokem

    even after completing all the steps sucessfully , i still getting booted into crash dump mode, what to do?

    • @TechieUjjaval
      @TechieUjjaval  Před 11 měsíci

      check ur device at local shop and ask for ic reballing

  • @shiamjad
    @shiamjad Před rokem

    Thanks man for the drivers

  • @shobanapriyadharshini911

    when I download the driver, it is downloaded in rar file and when I try to open it, it opens through windows media player. What does it mean?

    • @TechieUjjaval
      @TechieUjjaval  Před 2 lety

      i could not. Right click on driver rar file and extract all files.

  • @drsloppynuts565
    @drsloppynuts565 Před 9 měsíci

    All the process has done dowload is also completed but the reboot is not started what should i do next ?😢

    • @TechieUjjaval
      @TechieUjjaval  Před 9 měsíci

      it may possibly its was hardware issue so ask some local repair shop for ic reballing