DIY Bluetooth Speaker TUTORIAL
Vložit
- čas přidán 26. 11. 2018
- Follow me on Instagram - / aukits_diy
Kits are available here - www.aukits.com and etsy.me/2S2aTDp
The speaker has been upgraded, check out the new video: • DIY Bluetooth 5.0 Speaker
Specs, laser cutting files, and info - www.aukits.com/how-to.html
Songs:
1. Anitek - Strange Sensations
2. Anitek - The 3rd
3. Marxist Arrow - Twin Musicom
Have fun making your own speaker and feel free to tag me on Instagram when it's done!
Nice design !
Very clear, like it!
The vocals are more crisp and the build has a improved bass. Really nice built!!
Loved it!!
Keep the good work.
Nice Speaker...&Nice video!
Thank you. Nice simple video and finish. Peace
u are a great worker .your video quality is awesome.nice bro
Bought the kit to work on as a project with my son. Very happy with the product. Thank you!
So glad to hear this, big thanks!
Does the kit include the battery
@@vaughanbiddle3123 It does not
@@aukits Какого размера пасивка?
I had a crack at my own after seeing yours, but used different parts and methodolgy. Great inspiration. Got mine up here on youtube but only a sound test. used Visaton BF37's and a 2x8w tinysine BT amp
3rutu5, did you use the capacitor?
@@toddroles3234 yep I did on the non tinysine amp equivalent. I bought a few of those similar boards and only got one to work properly, but that one does have the cap.
Very nice by speaker and thank u for helping me build one
Super i am waiting for this
That's so cool!
Great Built boi
Very impressive! + 1 sub
nice skill bro
Very good job
Nice speaker bro
Great audio and video! Great job! : )
You know why I'm rewatching this xD
:Dd nice nice
Did you make it?
How much did it cost?
Like. Nice speaker!
Good job brother
Ur doin fine and great
What glue are u using?
ArdiNugroho it’s hot glue
Hi, I love your project! May I know what is the Bluetooth + Amplifier board that you used, since you've replaced that with the previous Bluetooth and Amplifier board. Thanks in advanced!
thank you so much, in advance ofc.
Loved this video and your build. Great music selection as well👍
I am building a portable Bluetooth speaker system of 3+3 watts.It mainly consists of a filter less class d audio amplifier.The problem here is that when I am powering both the Bluetooth audio receiver & amplifier from a common li ion 3.7 volt battery,a noise is coming at speaker.
I have a common ground for stereo audio out & power.
But If I power using two separate batteries the problems solves ie. No noise.But it's not portable.Because I have to charge a single battery.
In your speaker you have used differential audio coupling.
I my design the reciever directly providing L,R & Ground .
Is this this the cause for noise.
Your's are sparkly with enhanced bass imo.. inspiring mate... Subscribed... Keep up the good work..
Might I suggest instead of soldering the battery directly, get an 18650 battery holder for ease of replacement???
Agreed. How safe is it using all that glue and tape considering heat?
I have one RDA 5856 ete pcb, one old mi power bank, can I use them to make this?
well done
I think the diy one actually sounds better where as the JBL is kind of muddy and missing some treble. I think for the test though they should have both been 100% because sometimes the volume is not completely linear as it tries to adjust for human audio perception. I might be wrong though.
Love funky
Amazing i like you Channel
I have a Samsung PS-FC330 single speaker with impedance 3 ohm. I don't know how but
-I want to attach a power AC supply .
-I want to attach a 3.5 mm headphone jack
-I want to attach a Micro usb, a usb-c and usb type a for input.
-I want it to have bluetooth support.
Can you please help me figure out what to do step by step.
Omg it looks great
How many max voltage that board can handle? I want to apply 8 watt speaker
Damn bro.. it looks great and the sound quality is even better..
Right on. I'm planning make one but I want to substitute with usb type C
There'll be a video next week. Kits are upgraded with usb c and new wood option
@@Kart0nas when do you believe the new version of the kit will be on sale? Looking forward to buy it!
@@samydou0412 Hi! Everything's ready, apart from the updated website. Turns out it takes more time than a week to make. If you give us a letter at hello@aukits.com, we can ship you the new kit now
Received my kit today and it has USB C
great...I want for Peru
Good job. Would you please give the amplifier information?
czcams.com/video/Z6OCaygi9ek/video.html
Not bad but u know that the charging board has a limited output of 1A, so if the battery is fully charged u get 4.2W out of it. U should use a different protection/ charging board with an output of 3A
Why did you hot glued all components ? What if you want to change something?
NICE Very Good
What is the purpose of the 16V 2200 capacitor between the step up converter and the bluetooth amp?
Cheers
Smoothing the rough voltage coming out of the boost converter definitely
Ahhh, that makes sense.
Thank you
Кто-нибудь, подскажите, с какой целью ставится конденсатор на выход повышающего модуля? Сгладить пульсации?
Name of the wood?
А объем корпуса и пассивный излучатель подбирали по лабораторным данным, или примерно?
примерно
Very very nice Kit. I like it. Simple but nice.
Should drop link under
What amp you used?
Nice one. Wondering how many people do you have in the team?
Thanks, 2-3
Can you please tell me what is the difference between the red & blue wires used when you start soldering and the red & black wires used near the end?
no real difference, only that the black&red wires at the end are glued together into one wire for neatness
Is it possible to make it a 20w speaker if you replace the speakers with 10w speakers and give it a stronger amp?
yes, though the dc boost module tops out at ~15 W
GREAT qaulity !
can't believe you just have 190 subscribers.
have you come up with the kit idea before making youtube videos?
Hey, thanks! Yes, kinda. I had a few projects before but I did not upload them to the Internet.
@@aukits nice :D
Have you recorded them &
What are the plans for your next Project?
I appreciate your Work. Go on! :)
Indeed , maybe cuz he just have 1 video , should make more upload more !
Now he hast got 1500+ subs just from 2 vids LOL...
what'll be the cost to build this project
I ordered a speaker kit but what size wire do you recommend to solder with?
Hi. 22 - 20 AWG will work just fine
I have two subwoofers of sound link 42mm (1.5 inch)
How many inches of box do you have to make for this speaker's good effect?
Without bass resonance.
No Bass Resonance.
is going to use Bass Air Tube
Donate them to someone who possess the knowledge!😡
@@rahultej2248 किसके पास नॉलेज हें! पता भी बता दो😂😂😂
tatya vinchu Me, obviously
It's rilly gut 😅😊
Hello, would you mind telling me what amplifier & Bluetooth board you are using for this speaker? Thanks
Csra64215 + ht6872
Thanks
What is the size? LxWxH?
Really good speaker. I always told my friends, hey JBL, BOSE and any other good brand, can be pricey for their brand not really for quality. Build another one same as this one but bigger with 30-40W each speaker so you would have 80W in total and add 2 tweeters too and a nice passive radiator. I bet it would sound awesome but use something in between 1.2cm or 2.5cm of MDF (thickness).
Cool speaker, what does the passive part do? Is it needed? Thanks
Well it is used to increase the bass of the speaker and also it help to make it water proof
@@aayushsharma6233 yes it radiates the bass. That is why it is called a passive radiator. But it certainly does not make it waterproof
Sale?
It's so good
the jbl has more bass tho but overall the DIY speaker is awsome i love it
I'm about to do my first diy bt speaker with little knowledge about electronics and I'd like to ask something: what is the capacitor for?
Hi! Is is for high current consumpsion when speaker move a lot. It basically accumulates energy and gives it back on low notes when the driver moves the most
@@Kart0nas ohhh, i see. So how do I calculate what capacitor I would need? I have a bt receiver + amp that gives out 10-20w depending on input voltage. I was thinking of driving it with around 12v (3x3,7v lipo in series and again in parallel) and I have 2x 8ohm speakers with 30w RMS
Kereeen dan mantap suaranya. Makasih sob.
Thanks!
jbl is in 2nd position
Podrías venderme una de esos dispositivos?
Your speaker is better than jbl 4 👍👍👍👍
Wow sehr gute Video Qualität und Super Projekt. Ich hätte bessere Treiber genommen, dann hättest du ein Besseres Ergebnis erzielen können. Super 👍🏻
Many Thanks. These speaker drivers are actually one of the best little ones. Sorry for my German, I only studied it for a year
is it 1.5 inch speaker..?
I can have a 3W woofer?
More Tutorial's with more mobility small speaker :D
Из какого материала сделан корпус
What are the part sizes
plesase.....
What are the part sizes
Looks like your diy sound beter than jbl
What size?
Is the battery included in the kit?
It is not
Tbh your speaker sounds way better
i can see you hate jbl XD overall the flip 3 sounds better but the DIY speaker is not bad neither its also a good speaker
@@chumhau6993 Wtf are you talking, his diy speaker sound 3x times nicer XD (Yes i hate JBL but im honest with you, JBL is just a hype)
@@Max-oi9ge XD if that's what you think you're as stupid as a person gets XD second good luck with long duration on a DIY project and why do you hate jbl so much? Or you just can't afford a jbl and then you trashtalk that's what i think
@@Max-oi9ge XD your the typical idiot who thinks i am a fanboy no i am not bdw second of all you are not gonna explain why you hate jbl cause you have no reason to hate it. Don't try to argue any further m8 you full off trashtalk xD
Jbl is more bassy and outdoor this is more hifi. My opinion.
what size speakers are those
Drivers are around 40 mm in diameter
What does the 2200 uf capacitor do?
Stores energy for bass heavy parts because dc booster can't handle the load fully. If there was no capacitor, sudden bassy notes could sometimes sound distorted
@@Kart0nas thanks I was experiencing this issue without one. Why doe is have to be a higher voltage than the 6.5 volt from the booster?
@@laurensguijt u mean the capacitor voltage? if the cap's voltage below the booster voltage. the capacitor could be a bomb
*Could you please tell me the length and breadth of the speaker*
The enclosure is roughly 190 x 60 x 45 mm
@@Kart0nas*thank you so much for the information*
You should add components names in the description
Bluetooth audio module has I2S output or Analog output ?
Как ты врезал так ровно детали еорпуса и отверстия?
Лазерная резка это
Why you don't have much subscriber
Your speaker is best
Thanks thanks
@@aukits bro your speaker is better than jbl
How do u cut that ports for charge ...
Everything is laser cut
Your speaker sounds hifi compared to the JBL
JBL is more outdoor and bassy
And the jbl is and old one
Hello, did you deliver to France ?
Hi, yes. Shipping is worldwide
ಠ_ಠ
D
I don't like how you're holding that knife
I don’t like how you’re using “your” instead of “you’re “ 😉
@@Utube2Itube this is my second language,I'm Romanian.
I learned English 5 years,not my whole life so shut up
@@IWillBrutalyRemoveYourBalls sorry man, I didn’t intend to be mean. I thought it was another American making the classic American mistake, so I saw the opportunity for a sarcastic joke ☺️
Have a good day
Thanks,you to
Avem si romani daca e :)))
What's the total costing?
Visit the website, it is in description
65$
I made it but there is a problem. The speaker cut off the output when increase the volume on some loudly music why...any experience?
wireless board price
100;00000000
hollaaand
Does the electronics kit on your website come with the battery
It comes without the battery
Jokubas Mickus how do you get the battery then. Thanks
@@vaughanbiddle3123 if you go to 'about' tab in aukits.com you can see a link for battery below the 'Parts' and 'Specs'. Alternatively, go to a local electronics shop and ask for a 18650 Li-on battery that can provide at least 4 amps of current :)
Jokubas Mickus ok thanks alot ur videos great by the way
The DIY has kore fuller treble than JBL flip 4
7:01 posisi kabel speaker
Bisa bikin sendiri gak?
@@Ahmadboy12 bisa gan m.facebook.com/story.php?story_fbid=486895918821193&id=100025023676591
@@Ahmadboy12 ini hasilnya m.facebook.com/story.php?story_fbid=496678774509574&id=100025023676591
@@prajadeeska4657 mantap, aku juga lho 😛
@@Ahmadboy12 salam satu hobi 😁
Из какого материала сделана?
Из дерева
симпатишно) ну нафега было так аккумуляры заливать) непонятно ) а вот моя одна из колонок) czcams.com/video/HWs-ZaXMsOs/video.html
I want the speaker please give me🥺🥺🥺🥺🥺🥺🥺🙏🙏🙏🙏🙏