Today Abe is going to show y'all what he does to keep his caps straight weather it be on pipe or plate. These techniques work for him and they might work for you too. Give them a whorl mister!
I needed to cap a weld today on a gantry I am building, and in the past, my weld caps were ugly bad. I watched this video and tried the counting and only watching the left side. That really worked and kept me from losing concentration. The caps I welded today were the best I have ever done. Thank you for the instruction!
im gonna make sure to just watch puddle and try and move my rod more i just been dragging and looking where my rod is to the previous bead, cant wait to try this tomorrow!
Thank you for the knowledge.What i love about these welding pro videos is all the welders wear basic welding lids, nothing fancy or exspensive.The latest lids go for $400.
Can remember when this channel had 15k subs...recommended it to all the guys testing... From the fact that it has now, 110k subs allot of other people have done the same... Keep up the great work WT...👍👍👍👍👍
Wire wheel vs hand brush depends on the weld. I’ve saved myself lots of grief and grinding by wire wheeling a socket weld while hot slagged. But a cap on x ray pipe I would never touch with a grinder. Only hand tools like a brush and file if wagon tracks are allowed. Much respect to the old timers ways. Great welding!
wire wheel that bitch, saves you time and makes you more money. i worked at a job where they'd pay per weld so faster the better. & dont be jumpin the pipe either boi
john dowe fuck that. I barely brush mine. I knock my slag off (mainly the toe) with my file and a quick pass with a brush faster than you could get untangled from your cord lol. Wire wheel takes away the beauty of a good looking weld. But I also get paid to take pride in my work, sounds like that isn’t the case for you To each his own
Hola me gusta mucho su trabajo es más industrial , por acá en México no hay mucha escuela o centros de capacitación , solo puertas y ventanas , quiero aprender más y por eso me gusta mucho su canal
Old timers wire brush a lot of welding I do is code welding and is wire wheel and gauged welds before Qc buying it off or third party qc so all imperfections are not hidden
I see now what I've been really screwing up on. Handrail that left side for right to left and I imagine its opposite for right to left. Handrail, handrail, handrail.
Abraham Medrano bro I keep getting that red bulky and it’s not coming close to how it should look. I run it around 90-125amps arc start/dig on my welder Is from 1-10 I pick between 3-4 on it Idk what it is. My plate is quarter inch and my rod I’m using is 7018 1/8. Help! Lmk if I can DM you a video of me running it and how my stuff is set up. Thanks bro
👇WeldTube Store👇
www.weldlife.com
I needed to cap a weld today on a gantry I am building, and in the past, my weld caps were ugly bad. I watched this video and tried the counting and only watching the left side. That really worked and kept me from losing concentration. The caps I welded today were the best I have ever done. Thank you for the instruction!
im gonna make sure to just watch puddle and try and move my rod more i just been dragging and looking where my rod is to the previous bead, cant wait to try this tomorrow!
Thank you for the knowledge.What i love about these welding pro videos is all the welders wear basic welding lids, nothing fancy or exspensive.The latest lids go for $400.
Can remember when this channel had 15k subs...recommended it to all the guys testing... From the fact that it has now, 110k subs allot of other people have done the same... Keep up the great work WT...👍👍👍👍👍
New here :-) love it 1-2 out watch one side of the puddle ,,, I like your teaching style :-) looking forward to learning more
Counting is a good habit to have on vertical. I'm an ironworker so thats like 75% of my welds for damn near 20 years I've been counting like that
Great video. Nice weld, nice way to keep track of travel speed
Nice skill. Nice bead. Great video.👍
Wire wheel vs hand brush depends on the weld. I’ve saved myself lots of grief and grinding by wire wheeling a socket weld while hot slagged. But a cap on x ray pipe I would never touch with a grinder. Only hand tools like a brush and file if wagon tracks are allowed. Much respect to the old timers ways. Great welding!
wire wheel that bitch, saves you time and makes you more money. i worked at a job where they'd pay per weld so faster the better. & dont be jumpin the pipe either boi
john dowe fuck that. I barely brush mine. I knock my slag off (mainly the toe) with my file and a quick pass with a brush faster than you could get untangled from your cord lol. Wire wheel takes away the beauty of a good looking weld.
But I also get paid to take pride in my work, sounds like that isn’t the case for you
To each his own
ABRAHAM top class in teaching welding thanks for your TIPS
Hola me gusta mucho su trabajo es más industrial , por acá en México no hay mucha escuela o centros de capacitación , solo puertas y ventanas , quiero aprender más y por eso me gusta mucho su canal
Exelente tutorial, saludos desde Santiago de Chile 💪👨🏻🏭😎
10 times out of 10 😂👍🏽👍🏽👍🏽👍🏽Hell yeah
That's top class Learning welding
Bahut bahut dhanyebad india se bhai
Good instructions in short time , thank you primo.
Can you do how to properly do a TIG hot pass thanks for these videos maybe their not long but packed with good info
Old timers wire brush a lot of welding I do is code welding and is wire wheel and gauged welds before Qc buying it off or third party qc so all imperfections are not hidden
😍😍😍 nice weld and nice man, i would like a teacher like you 😘😘
When I cap I make sure I have enough ammo and clips!
Great explanation. Don't you worry about breathing all that smoke? I always held my breath until I switched to a fresh air system.
Caps are the only time I get nervous haha. "Man, this has to look good or I'm not gonna be happy!" OCD in overdrive!.
Thanks for sharing your knowledge sir!
Great video Abraham!
1 2 count that helps alot
Abraham thanks for your tips it works for me as well in my training session now please share me your Stainless steel stick welding 6G is it possible
nice weld
Can u do a vid on how to get a wide bead
That's some awesome welds
I see now what I've been really screwing up on. Handrail that left side for right to left and I imagine its opposite for right to left. Handrail, handrail, handrail.
Very helpful thanks man
Che' FlipperCorn😂😂. Just got back to West Texas wey, tell everyone I said what's up. Y'all stay safe.
Lmao bro! 😆
good work
What is your temperature on ???
How about padding beads overhead? How to keep it straight and whats the amperage?
Thanks man
Thanks
You can do this by taking an extra pipe and marking it
Good Shit
You shouldn’t have to hide your weld if it’s good 🤷🏻♂️
my welds looks like shit, you wont break em though. lol not everything has to be pretty
MUY BUEN VIDEO¡¡ SALUDOS
Thnk u men 👑👑
Definitely good help!
Hello, Can we use propane to shield aluminum welding? Hard for me to get argon gas, where I live.
Lol no. Not to be sarcastic but propane is flammable. Not a shielding gas. It would make a cool flame thrower though. Do you mean helium?
Is it the opposite for left handed welders
Best
That’s clean 💯
Thanks for the video.... 🤙🏻
I like your channel , you are a good teacher my friend , are you welding with 1/8 ?
Riglen Duwaer thank you and 3/32
Abraham Medrano bro I keep getting that red bulky and it’s not coming close to how it should look. I run it around 90-125amps arc start/dig on my welder Is from 1-10 I pick between 3-4 on it Idk what it is. My plate is quarter inch and my rod I’m using is 7018 1/8. Help! Lmk if I can DM you a video of me running it and how my stuff is set up. Thanks bro
🙏🙏🙏
What rad are you use
Amps?
Great , Good to know!!!
Hey bro whats the brand of the white hat?
Pablo fibre-metal
Did he grind guide lines?
Richard Ponce don’t get any ideas lol
HEADPHONES R.I.P
thanx needed that
Awesome
You should watch your puddle and the rod as the flux burns,,,,you don't wanna weld wit a beat up flux rod
Did you just tell the people Not to show the imperfections ??? Wtf .
WICKED GRAIL I believe he did. I hope he meant to say something else.
I agree with him though your weld will look better brushed. Especially a hot weld.
Give job, certifyd me
It’s hard for me to keep my beads straight but they look pretty good after I run my head
This dude looks like that one MMA fighter.... cant think of his name, and too lazy to look him up. Someone will know.
"I let my muscle memory take care of the other side" - Nice, I've never thought about that.