Video není dostupné.
Omlouváme se.
how to USE uscutter mh 871-mk2 (VINYL CUTTER review)
Vložit
- čas přidán 28. 12. 2018
- This vinyl cutter is probably one of the cheapest on the market, and there's a link below for great tutorials on the free software we use. We’ve been using this for about two years and we really like it. It's been a great value. We thought about getting a Roland, but (cough, cough) for the money we could buy a lot of these for the same price. In this video we go through how to use the uscutter machine and how to apply your graphic to basically whatever you want.
Thanks for watching!
Amazon link:
USCutter vinyl cutter: amzn.to/39AGYs8
Great tutorials, FREE software... InventBoxTutorials
/ @inventboxtutorials1898
SUPPORT MY CHANNEL FOR "FREE" - visit amazon through this link (or ANY link on my channel)
and I'll get a small percent of WHATEVER you buy from them. Costs you nothing. Thanks guys!
(As an Amazon Associate I earn from qualifying purchases.)
Just bought a used one of these (ki 720 model) and obviously had the blade in wrong. I see that now, thanks to your video. I've searched everywhere looking for someone explaining how to put the blade in these machines to no avail. So I appreciate that you made this.
I'm a total newbie with this and appreciate the advise. Thanks for putting this together.
5:30 The paper comes off much nicer if it's warm. I found that you only get good results above around 62° F
Does this plotter can make print and cut ??
what is the force and speed you use when cutting vinyl heat transfer?
This more about how to apply what you cut not about the cutter.
what software does the cutter use to cut vinyl???
Can u use heat transfer paper in the US cutter ?
Yea
@@ChynaFox man I have a vinyl cutter that I never opened, just sitting in the closet, I'd like to use transfer paper instead of actual vinyl rolls but I have no clue where to even start. I've searched for videos but no luck
Can you make 1" or 2" decals with this cutter ?
Amigo mi plotter uscuttes mh 871 mk2 después que hace su corte al finalizar me traza dos corte horizontal y daña el trabajo que puede ser???
Mi plotter US cutter MH871 igual a ese no le funciona el cabezal correctamente, no le aplica presión a la cuchilla solo se mueve pero no sube y baja para cortar ayúdenme 🤷 😢
Does it matter what laptop we need to buy or use
What application tape is this?
What software does it run off of? Got one from an individual and they didn’t know anything about it and wasn’t sure what type of software it was used with.
Go to the US Cutter website. They have software for the cutter
not nearly enough explanation...what's an air cut...and why do it?? Need closeups of the pc screen.....watch the video as though you have never seen the cutter and then please edit this.....
He's saying an air cut is where the blade is not down touching the vinyl. You can watch where the cutter is going to cut on your vinyl as a practice run. Once you see that your project is going to cut where you want on the vinyl you can lower the blade and let it actually cut the vinyl. Its just a safe way to be sure of your cut without wasting your vinyl.
This UScutter MH-871 are compatible with windows 10?
Do you really have to continously guide the vinyl with your hand?
Hey, I when I use the vinyl cutter the paper moves with the blade and it doesn’t cut properly anyone know how to fix?😊
any hints on what to do if the cutter is ripping the vinyl with tighter cuts?
A couple thoughts. Make sure the test Cut with a rectangle with a star in it is cutting correctly. You should be able to pull the star out if everything is adjusted properly. If it’s still not cutting the test part correctly maybe try a sharp blade.
Whenever we’ve had problems with the tighter cards we slow speed way down.
Let me know if these ideas help.
thinner vinyl possibly?
Slow your speed down
@@livefree6878 I just ordered the same exact cutter off eBay but it did not come with software. Is there a free download for the software or is that something I have to buy?
HELP! My MH 871 mk 2 cutter is cutting the desired cuts fine... but it is also slightly cutting , scratching the vinyl, between the desired cuts, as it travels from one shape to another. HOW do i fix that?
Raise the knife a little bit
Yes adjust the blade it soposed to be half the length of a credit card the side of it
Do u no if this machine will cut cardstock and cardboard like chipboard
COMO PUEDO CONSEGUIR LA TARJETA DE MI PLOTER
Can i get the link to the program for the printer please
tienes drivers para windows 10 pro. te agradezco
anyone know the right seetings for its calibration and offset settings to cut the vinyl clean
I came looking for this answer 🥲
What is the name of the app used to cut?
هال هدي المكنه تشتغل على الفلكس 8
My cutter isn’t cutting the curved edges right. Is it because of the blade or do I have to click something in the software before sending it to the machine ?
Hi, do you resolve that problem? I have almost the same, is not cutting the entire design. I also noticed when I finish to cut, the blade is still down and cut the vinyl 🥺 help
Lorena Ostria Yes I did! Make sure your laptop or computer does not shuts off when the machine is cutting the design.
Haha left over stuff from the application tape?? The blue tape is.. just... ugh
We’ve used all kinds of different materials for application tape. Old application tape seems to work really good. My favorite is a piece of clear contact paper. It’s not actually paper it’s more like a sticky vinyl. I tack it off on my clothing to remove some of the tack. The nice thing with the clear sticky plastic is that you can actually see how it’s gonna look before you actually install it. I hope this answers your question, if you have any other questions let me know
Hello, I have this same machine and when I try to cut vinyl it keeps chewing it up making deep holes in the vinyl. I've had it a few months thinking I should change the blade nothing seems to be working, do you have any suggestions?
Check the roller on the far right. When latched, ours caused bunching and grabbing. Unlatching that roller allowed the vinyl to cut and roll freely. Hope that helps - thanks for watching!
Live Free I will give this a try, thank you!!!
@@livefree6878 can I put heat transfer paper in this cutter ?
Dang bro! Can that thing cut your nails? 😄
it hurts to watch this
I feel like most people who work with vinyl regularly were cringing for most of this video
Why??
Wasn’t that bad the painters tape had me laughing. Ole expensive pesky contact paper. And his blade depth was messed up or the blade is dull. But the concept was here.
Does someone know what to do when my blade is bouncing between cuts?
have you tried replacing the strip. make sure theres no dirt or debri on strip. check tool carriage holder. tighten blade holder. trouble shoot gears located on side panels.
Que programa se puede usar q no sea con computadoras viejas osea q no sea windows xp 7 y 8 por que ya las computadoras estan muy modernas y los programas ya no son compatibles
Angelon Lopez VINYL MASTER
How loud is it? I live in an apartment
That’s a interesting question, I have a 3-D printer that I would consider pretty quiet, but I can hear it when I’m upstairs. This has the same basic stepper motors and movements. I’ve always thought of it as a pretty quiet machine. I think if you had some normal volume music near it, I don’t think it would be detectable through a floor. I hope this answer helps. Let me know if you have any other questions
Don’t buy this one buy a Cricut it’s very quiet you can cut multiple different materials with it it’s easier to use and cheaper to buy the machine, most craft stores has products to use with it from pens to draw with it to different blades that are already set up, more mats if yours becomes not so sticky
probably like your garbage disposal , but on and off, on and off. Or like an electric hair cutter, or blow dryer.
Is this software compatible with Apple ?
cand i print somthing in my computer and then cut it with the machine
I’m not sure if I totally understand the question but let me try to give an answer. In order to output something to the machine you have to use the software that comes with the vinyl cutter. I believe that there is also a driver that is specific to the vinyl cutter as well. Let me know if this answer makes sense.
Hew to mik
Did you talk about how to do it not anything about the color itself. You need to rename your video.
A lot of unnecessary steps
It doesn't tell you how to use the machine.... it mostly tells you how to apply vynl... pointless video