How To Fix Limp Mode Causes (Reduced Engine Power)
Vložit
- čas přidán 28. 06. 2024
- In this video you will learn how to fix limp mode and learn the common causes triggering limp mode. If you're getting reduced engine power, car can't go faster than second gear or 35 miles per hour then this video will be helpful.
Top5autorepairs
Subscribe - Auta a dopravní prostředky
Limp mode is the worst thing that can happen to a man
Not as bad as waking up in Thailand next to a GearBox though, amirite?
Best explanation of limp mode I've seen on youtube. I think my problem is timing chain, rattle on cold start up. Also noticed metal shavings in my last oil cange.
Good to the point info. My car went into limp mode, dishonest repair shop owner suggested expensive fix to fund his next vacation, I don't trust mechanics or shop owners. I paint them all with the dishonest brush.
You fix that shit yourself, Fitzpatrick? Ernie was really looking forward to that vacation in Delaware I'll have you know! There's 2 Nights at the Marathon Inn he'll never stop thinking about because you wouldn't spend $167.34!
=\
Very interesting and helpful information. Forgot to mention misfire.
Very helpful ! Thanks.
This video is awesome! Thumbs up! Thanks!
Thanks for very valuable information 👌
Excellent. Thank you. 👍
Always to the points
i had this the other day, turns out i just needed a 12 episode anime character arc
Loved this lol
suspicious.. does this character arc include a childhood elf friend? 🤔
Very useful
Thank you
In my SLK 320 R 170 465..2001..has this issue but only if l try to spin the rear wheels!
I thn hve to reset the transmission and can drive without issues ie by taking the accelerator pedal slowly..
What could be the problem?
im here because of gigguk... cool video :)
I am here to learn, don't disturb the class pls 😅
im here cause of gigguk too, but yea this video is nice
W comment
Thanks for the info. It describes my problem. But now i need help fixing it. I’ve been working through all the trouble codes.
On my list: pcm/tcm, cat converters, o2 sensors, evap canister, evap solenoid, evap purge valve, throttle position sensor, accelerator position sensor, clear all codes, transmission fluid, oil check…
I’m left with a few options: check wiring, check timing, vacuum out the evap lines
My daughter car . She change coils, spark plugs, injectors, and steel on limp mode Her codes are misfire one and misfire 1 and 4 so she’s just going to check the wires .
Have your battery and alternator checked, with that many codes sounds, like low voltage, or bad ecu.
I have a 2012 ford Taurus replaced the throttle body and my vehicle sometimes stalls,backfires,and eventually goes into limp mode while driving no matter the speed at random,even when idling at times. What could be the problem? I’m getting throttle body codes p2104,p2107,p2110, and p2111
Limp mode can be from a small disc which contacts the brake switch falling out . I found a dime size rubber disc on my car matt . The brake lights were on and would not go off . I glued the rubber brake light disc back in place . The break lights off and truck runs like it used to. Anything puts the truck in limp mode /
Good video
I had a car that developed an error with the abs system where the brakes would suddenly lock up at random times and I'd screech to a stop. This likely happened because of a faulty anti-roll sensor which I replaced but it needed to be professionally calibrated. So I replaced the ECU and the transmission began causing errors since the ECU didn't recognize it, which ultimately sent the car into limp mode.
I had this also rear abs
What about a loose motor mount? Would that trigger limp mode?
NEED MORE CONTENT 💯😤
I have problem in the kia amanti 2004
Code p1155
I changed the throttle body also i changed APS but rhe code not received
My van went into limp mode today. Yesterday the battery drained totally, I called the RAC today who came out and got me going. Annoyingly the engine light decided to come on saying glow plug circuit issue, and DPF soot and ash accumulation, hence the limp mode. I have been told on a facebook group that it's likely gone into limp mode due to the battery draining and messing up something in the engine management, it seems a strange coincidence why all of a sudden my van suddenly has a glow plug a DPF issue when 24 hours earlier it pulled like a train.
Does limp mode have anything to do with breaks? Not working right?
Can you tell me why my 05 maxima did this after I replaced the alternator?
I have a CRV 2012, but it do not go beyond 5,000 Revs, there is no engine light nothing in the scan, what could I do
My truck goes into limp mode "randomly" but throws 0 codes
I think its a sensor "hopefully" Its a 1999 Chevy Silverado 2500. I dont want a mechanic to tell me I need a new transmission. When its not in limp mode it drives and shifts fine.
Mines going to limp mode i hooked up computer to it and o2 sensors pop up about to change that and hope for the best
I just got my limp mode today I accidentally over rev the car I thought I was in gear but it was in neutral. Check the codes cylinder one through four and random misfire came up before I reset the code I turn the car on and off went for a drive no issues the car drove normal after that I cleared the codes and no issues after that
So my 2015 nissan stopped accelerating, no check engine light, still powers on. We scanned it and all issues pointb to an abs sensor issue. But it could also be the transmission. I don't want to waste money fixing abs sensor for it to be the transmission, so what are the chances the abs sensor can throw it into safety mode?
Another words everything.
Can limp mode on a dodge cause no compression in multiple cylinders? Like 4 out of 6 ,please help went into limp mode then crank no start, no compression in cylinders
It's unrelated.
My car goes into limp mode but if I cut it off and back on goes away?? Every time
Might not mess up for weeks then will do its thing. Off back on good to go any recommendations??
Ohh i get it now. I personally am in limp mode now my car to
I like technology until it gets bossy or manipulative.
Hi bro
please help me i have dodge charger 2009 3.5L sxt when i go fast than 60 speed i mean when i drive by 80 km speed my car thunder ⚡️light turn on and car go limp mode when i did diag obd2 bring me this code p0652 and p1628 please help me 🙏🏻
Sensors. Abs, freewheel solenoid, transmission sensors, gear position sensor, throttle body sensor . .replace the car
My paystar with ism engine don’t want to go over 15mph…Egr pops up on computer
came here from a ED joke but got actual advice
Try checking the battery first had 3 mechanics say transmission but it was that battery
What the battery low in voltage? Did you switch out the ground wire on the battery??? I’m getting a u0101 (lost communication with TCM). Parts store says the alt, starter and battery are good. Jesus fix it!
Oh and mechanic says info is going into the systems but not out.
Very interesting but what happens when the car shifts well from 0 to 100mph, but it struggles to go past 100mph Tachometer maximum speed is 180 mph No check engine light and no any codes, I have changed the following already.
1.clean catalyc converter
2. Put new fuel pump
3.put new fuel filter
4.new spark plugs
5.new ignition coils
6.new air filter
7. new fuel Nozzels
8.Clean transmission pan (no any metal shavings found )
9.Clean valve body and their transmission shift solenoids
10. New Mass Air flow sensor
11. Clean camshaft and cranshaft sensors
12. Change transmission fluid
13. Oxygen sensor tested and are OK
What else can be done to this vehicle??????
Computer? It could be programmed to cut off at 100 mph
@@EriBarr But i used to driving up to 120mph sometimes 140mph, but now the car doesn't go past 100mph. And the maximum speedometer reading is 180mph.
Try Pcm cleaning it
How do you get your car out of limp mode once the part is replaced
Take the neg battery cables off for 2 mins
2010 f150 went into limp mode any tips wrench light is on feels like it’s stuck on 3rd I turn car off open door and it’s good to go? Someone don’t just read this, RESPOND PLS
man can you help the diffrent limp mode?
I have a 99 chevy silverado 1500 5.3 that ive done some upgrades to and, it's been stuck in gears 2_3 unless I clear the codes then it will go from 1 2 3 but won't down shift, I also had a p0300 code and found a vacuum leak, as soon as I fixed the leak, my maf went out, my truck starts and instantly dies, is it possible that the leak kept my truck running and once I fixt the leak my engine no longer was getting proper air?
oh and can the maf cause limp mode?
Will a damaged catalytic converter and bad O2 sensor cause this a vehicle to go into limp mode?
Yes