Let's go Make Mistakes - Arcane Jinx's Butterfly
Vložit
- čas přidán 27. 08. 2024
- Jinx's modified butterfly, from the show Arcane, was perfect practice for working with brass. The butterfly also lights up when you set it on the base. We learned so much from this build!
Link to SVG and STEP Files for Butterfly
www.punishedpr...
Learn Fusion 360 from Bill's Beginner’s Guide Video Course
www.punishedpr...
Support Punished Props Academy content by joining the Extra Credit Club!
www.punishedpr...
Tools and Materials:
Bill's Shop Tools
www.punishedpr...
Shapeoko 4 - CNC Router
shop.carbide3d...
Stay-Brite Silver Solder Kit - Amazon
amzn.to/40bCLFy
Brazing Flux - Amazon
amzn.to/3yMwggT
Silver Solder for Brazing - Amazon
amzn.to/3n234Qs
MAPP Torch - Amazon
amzn.to/3JNEzPL
Mini Butane Torch - Amazon
amzn.to/3lnToiJ
Brass Pickling Kit - Amazon
amzn.to/40lcZit
Needle Files - Amazon
amzn.to/1CBFwTs
Scotch-Brite Scour Pads - Amazon
amzn.to/3TJkwpj
Rotary Tool - Abrasive Buffing Wheels - Amazon
amzn.to/41mwNTY
Stencil Vinyl
uscutter.com/v...
Transfer Tape
uscutter.com/a...
Brayer - Amazon
amzn.to/3JQpFbw
Ferric Chloride Copper (and brass) Etchant Solution - Amazon
amzn.to/40Dt5nR
Super Glue - CA Glue - Amazon
amzn.to/1y8ynly
Super Instant Epoxy - Amazon
amzn.to/3EjwcbO
Anycubic Photon Mono X - Amazon
amzn.to/3sHBGr8
Siraya Tech Clear 3D Print Resin - Amazon
amzn.to/3n3WUPA
Soldering Station
www.punishedpr...
Enameled Copper Wire - Amazon
amzn.to/3JUv9C0
Linseed Oil & Beeswax Polish
www.darbinorvar...
Metal Decorative Gears - Amazon
amzn.to/3JPxBtE
Plaid FX Paint
plaidonline.co...
Brass Stock:
Brass Sheet .8mm - Amazon
amzn.to/42kQbRH
Round Brass Tube 3/32" OD - Amazon
amzn.to/3LK2cKm
Round Brass Tube, 1/16" OD - Amazon
amzn.to/3ZZbZAB
Round Brass Rod, 1/32" - Amazon
amzn.to/3n7zpW3
Brass Flat Bar - Amazon
amzn.to/3lqOzFp
Solid Brass Rod 1/16"
amzn.to/3lv3HSb
Punished Props Mission: Transforming passionate fans into confident, skillful makers. Find out more at www.punishedpr...
Fun ways to help our channel:
Join our Extra Credit Club! www.punishedpr...
Buy our books! www.punishedpr...
Share your projects with us on twitter!
/ chinbeard
Music from Artlist
artlist.io/ref...
Roadside Rodeo by SLPSTRM
Urban Rebel by Ikoliks
Catching Lightning by Alex Mastronardi
Come With Me by Ikoliks
Bring Home The Beats by Jake Bradford-Sharp
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Count how many cat hairs are in this video! Actually, don't. It gets gross.
Hey! Back off the cat hair count. It's not their fault that they feel/demand to be part of every phone call!!!
I'm more fascinated by the plywood DIY monitor stand & the Sound Devices era speaker
So many cat hairs it almost triggered my allergies.
This is a great project, it took me awhile to get around to watching it because of the length, but I really try to watch every video you all drop.
Come on, it’s just kitty cat hair.
I couldn’t distinguish the cat hairs in the video from the hairs on my screen, so I think you’re good 👍🏻 lmaooo
This is magnificent. Arcane was full of fascinating bits of small clockwork items like this but I never imagined someone would be crazy enough to not only try to replicate the fireflies specifically, but to succeed so thoroughly. Beautiful work.
Thank you!
The texture you added to the wings makes them look like the scales on an actual butterfly wing, so I think that worked out really well.
I love how the texture turned out, thanks!
It's such a gorgeous piece!
But the real joy is in watching you put it together, and see your reaction as you complete each step in the process, until you are left with a mechanic butterfly that LIGHTS UP!
Awe, thank you so much! =D
I’ve never actually watched someone ‘level up’ in their making in real time! Beautiful….BEAUTIFUL work!
I haven't seen Arcane, but your video was great! I'd love to see you do more items that use brass, wood, 3D printing and other things together like this. Also, thanks for the awesome "beauty shots" towards the end of the video. So many people show the process of making an item and then barely show how awesome it looks when it's done. So I appreciate you taking the time to show it off properly.
I appreciate the comments about the beauty shots. It’s one of my favorite and most fun parts of the process! 😄
"da bomb" in the dangerous chemicals cabinet is just *chef's kiss*
if you are worried that the double-sided tape is gumming up the cutter, I can wholeheartedly recommend to you using masking tape and superglue. One layer of masking tape put on the workpiece, one layer on the base plate of the cnc machine. Now glue the backs of the masking tape together with the superglue. It provides a secure hold strong enough for cutting wood or brass and can get easily removed with acetone.
Great tip!
Just appreciating Da Bomb in the hazardous materials cabinet.
Also, beautiful work!
Ha! Good eye!
This is by far one of the coolest projects you've done! I can only imagine the problem solving you did to come up with the very elegant power solution!
Loved this, tons of potential props from Arcane. Makes Jinx’s tinkering even more impressive.
What an amazing job at a delicate, exquisite artwork! I'm glad you added the bloopers because working in such small scale is tricky. Congrats!
Thanks! The bloopers are my favorite part.
What a fantastic journey to see this finished. It looks amazing!! You should be very proud guys!
Thank you! 😄
Yeah! I'm gonna go outside and make mistakes! **Ralph chuckles**
:D More seriously, thank you for the video, the result is wonderful! It was totally worth all the mistakes, frustration, time and learning. I've seen the work of some artists that make different kinds of little metallic creations, and this totally is at the same level. 1 hour video that I absolutely didn't see pass, especially with the cool atmosphere you 2 bring to your videos.
Thanks again and take care! Cheers from France!
Merci beaucoup! 😄
A wonderful project to see come to fruition. Da Bomb in the fire cabinet is a nice touch.
So glad you're still creating 👍 Missed you guys!
Enjoy the ride!
Saw this work unfold in the behind channel and so excited for Bill's learn-as-you-do experience! It turned out amazing. Was a little bummed to see it painted though, but I guess it's a prop from some movie and you just had to do that ;)
I definitely learned a TON on this project.
This build was pure and utter joy for me from start to finish, I adore butterflies, this reminds me of an automaton, a butterfly Bubo before the paint job, just absolutely brilliant, you’ve made my day seeing this. I loved it.(you should make another one without the paint sometime and stare at it’s splendour)
Awe, thank you so much! 😄
Wow! Wow, wow, wow, wow! This is INCREDIBLE! The planning, the tiny details, the skill, absolutely amazing. It turned out beyond stunning! I'd love to see more brass work for sure. This was such an amazing watch, I spent most of it with my jaw on the ground.
Hi Punished Props. This is by far the best video I have seen all year. Congrats on the fantastic effort and comprehensive walk through. Very inspiring. Well done mate.
Super excited when new video popped up In notifications 😃 . 🎉🎉🎉🎉 , that looked like a headache to do all those little fiddly bits , but wow it looked amazing 👏👏👏
Hyype! =D
That's absolutely beautiful guys, great work!
Thank you so much!
Been subbed to this channel but haven't actually watched any videos in months. The title of this spoke to me though as making mistakes is a hobby of mine!
Awesome, let's make mistakes together! =D
This is absolutely incredible. It looks so delicate and the idea to have the electricity pass from the base up the legs is genius
Thank you so much!
I make jewellery as a hobby, one earing design I did I wanted a nested brass detail that acted as a hinge, looks similar to how you joined the wings to the rods. If you paint Tippex (UK) or Whiteout on the inside of the tube it will act as a resist to the solder so that the rod should rotate inside the tube once the soldering is done. That allows it to act as a hinge and the wings can be articulated if you wanted them to move or flap.
The finished result is stunning!
If you're interested, pickling solution is just white vinegar and salt. Plenty of resources on measures, but pickle is WAY easier than sanding or polishing out the oxidation. You did a fantastic job and reminded me why I really want to get back into jewelry again. Haven't had my own stuff since college oh so many years ago. Next time, you should try a patina! (It's like mad-science and alchemy!)
I've said it before, I'll say it again: hands of a surgeon... of course that's before I saw the outtakes, GAH! Great build though! The texture inside the wings might have taken a while, but it's beautiful.
Thanks so much! 😄
One of the coolest things I have ever seen.
guys this is amazing!!!! super build... i'm always so impressed xo
Thank you so much!
I love how many different techniques you guys use! It’s so helpful to learn about new things, and so fun to watch!!
This was a super satisfying mix of techniques.
It was really great to see the etching and helped to refresh my sautering skills.
Hey, guys! What a great build and so much problem solving and skill acquisition. OUTSTANDING!
Thank you!
An amazing build - a great job of pulling an item out of an animated universe into ours. Stunning !
Fantastic work! This was a great project. Thanks for sharing the failures too. It’s part of the process.
This is such a detailed and fun piece to have made! Love it 💜
Thank you!
I was so worried when I saw the title, but I understand now. This came out amazing! Trial and error is the best way to learn.
That was great, thanks. Really appreciated the tiny electronics execution that I was curious about. Looks awesome.
Great build, Bill! I don't know how you're able to work with such little parts. Seeing you learn from your mistakes is inspiring, especially when the finished product looks so good!
Thanks so much! I’m glad my failures are useful to other people.
Part of me is always amazed at what you are able to produce, but there’s an equal part of me that sees things like using you circle template lines to mark four sides of your cylinder that puts me truly in awe… thank you for that….it will be used.
Bill, this is one awesome build!
Thank you so much!
Incredible work! Hiding the wiring in the legs is brilliant and really sells the effect. Looking forward to seeing more projects in the future!
Thanks!
Wow! This is such a beautiful project and a great video showcasing how you made it. I love seeing the process from planning to the finished butterfly. As always an amazing creation - thank you for sharing the journey!
You’re most welcome! =)
That's not just a prop, but a work of art! Amazing job!
Thank you!
Awesome build Bill!! Loved see the behind the scenes footage. Shout out for the extra credit club!!🎉👍
Thanks for tagging along on the journey! 😃
Amazing cartoon and amazing project brother wow so cool !!!
That was phenomenal, but a little tedious for me I would not be able to do that. Kudos to you.
This kind of tedium is my zen.
Yeah! Punished Props is back.
Wooo!
Some absolutely beautiful work. Bill, I love watching your work and I think you folks just keep betting better and better. Thank you for sharing!
(And Kitty Fur is just pet-love-glitter. At least, that's what I say when I find it.)
Setting Z height - you don't need the thinnest, you need a known thickness. You can then set the position of the cutter to offset that thickness Carbide Motion supports this in the Set Zero dialog.
For fixturing, with thin material if you don't want to do the painters tape + super glue trick you could have run some sheet metal screws into the corners of your cut outs to fixture it too.
Still, love this project. (I'll admit, I'm only just through the machining of the wings section when leaving this comment)
Awesome information, thank you!
Yay! Any day with a Punished Props video is a good day! Great video. Thanks for your hard work!
You’re welcome!
The butterfly is absolutely beautiful!! I am in love ngl, you did such an amazing job!
Thank you so much!
This is BEAUTAFUL!!
Great video. It's an inspiration to see the level that you guys are building these days.
Great to see you again!!!
Cheers!
Great build Bill. Wonderful camera work by Britt.
Thank you!
Had to take a second look. Da Bomb beyond insanity in the caustic chemical cabinet was perfect! I would love both of you to be on Hot One's.
Haha! Good eye!
this was a joy to watch thanks for sharing!
The hot sauce in the flammable cabinet tickled me more than it should have.
Beautiful job! Well done!
Pretty cool project. Great learning along with you guys. Plus hope Click Spring see this.
That would make my day.
bill and brits one day build ...lol
making Savage jelly
brass work is crazy cool
I am falling in love with brass!
I would love to see you make one of jinx' grenades too! If you can make one of these butterflies this well, you can make a lot more
What a great video for my first time seeing you. 👀
Got a new subscriber 😊
Well done Bill.
Thanks!
Gorgeous product, love love love the vid!
Absolutely incredible, love seeing you tackle new skills too!
Thank you so much!
Until this video, I didn't realize how much I need these >_>
"Da Bomb" in the flammable and acid cabinet!! HAHAHAHAHAHA!!
Awesome piece!!!
For holding those tiny wires/bar stock, some SMD tweezers with grooved tips might be really nice, such as the Edsyn EP-110-SA
These small things drive me crazy Just watching gives me feelings
You're a wizard Harry
Beautiful.💖
Thank you!
If you plan on silver soldering tiny parts in the future i would recomend using a charcoal block.
That was a great build!!!
Thanks! =D
A good while back y’all made videos of making a LOtR and Highlander lightsaber sword. I would love to see another of these lightsabers build with the Thunder Cat’s Sword of Omens as the handle for it.
It's been so great to watch this build all along the way. The end result was absolutely worth all of the broken bits!
It was totally worth it! =)
Thanks for the content! I wait all month just to see what you are up to!
Man, I love your channel
Some Soldering tips/info:
This is great but you could use so much less solder. One of those chunks could of be all you need for one side.
Solder come in "harnesses", Hard requires more heat and soft requires less. Start your components with Hard and move down the harness as you start connecting parts together.
Also, you can make a Pickle with Salt and Vinegar and some warm water. :D
The 'staining' is actually the copper in the brass coming to the surface from heating in that area.
Stunning!
IT'S GORGEOUS
Such a cool project. It turned out great!
Thanks so much Eric!
I laughed at the bottle of Da Bomb in the Awful Chemicals Cabinet.
Ho boy, as Bob Ross would say in reference to the painting: "Now here's your bravery test right here" . And given just how incredible it was before then...I don't know if I could have brought myself to paint it.
My practice piece helped calm my nerves.
that's beauty ! i want to buy one now
Thanks!
This is stunning work. When trying something wholly new, you don't start small, do you? Deep end, meet Bill.
I always jump in with both feet! =)
Wow this is so cool!
Thanks!
Wow! Magnificent
this is absolutely AMAZING!!
Thanks! =)
i really liked this one keep it up !
Thanks!
@@punishedprops hehe
This is like an advanced version of the old Cootie bug game.
9:44
"...and I bought some Nu Metal" *Korn noises intesify*
\m/
You probably already know this, but Harbor Freight has these cheap dremel cutting discs that while the true-ness/balance leaves a bit to be desired, they are phenomenal for delicate parting and edge sanding, and scoring long thin lines.
I can't wait to see what you guys do with wireless LED's!
I got some to play with and they’re super neat. I just need the right project.
When I was a kid I etched pcbs by drawing it all with sharpie...got pritty good at it too lol
End mill bits and drill bits are vary different things that can't do each other's jobs even if they look the same
The thumbnail undersold this video by a distance!
Thanks to CZcams for continuing to push it in my recommended 😅
Thanks for the video!
You’re welcome!
1:26 That's pretty good for the side profile!
8:29 Don't why that name took me to Beavis and Butthead.
14:43 Futurama
25:43 Oh,wow!
28:51 So that's what that little attachment does!
That's a pretty good project!