THIS OLD OUTBOARD - Thats Whats Happening Baby !
Vložit
- čas přidán 17. 04. 2020
- It's This Old Outboard. Fishing Pole Repair. 1987 70 Hp Johnson Outboard Fuel Pump. RV Water Heater Leaking. Trading the 1975 40 Hp Evinrude. And I'm Moving !
Follow the Real Life Saga One Outboard at a Time & SUBSCRIBE TODAY !
You Never Know Whats Gonna Happen Next !
It's This Old Outboard. Resurrecting Old Outboard Motors. - Zábava
The new location looks great 👍 nice and shady with a shed to boot very happy for you 😊
Thanks again !
what a great way to make some money in your retirement years. Not a lot of people can do what you do with outboards. You're a smart guy. thank you for all the great videos. I love your channel. I wish I lived near you so you could be my boat mechanic/fishing buddy!!
Hey. Thanks ! Let those Ads Play ! Hahaha thats how I get paid. It's not much but every little bit helps. Thanks again & Stay tuned !
@@THISOLDOUTBOARD1 I promise I will let every ad play for now on. I love watching your channel and you are very talented. I bet you know how to work on a lot of things. Never sell yourself short your special!! Another thing I like about you is we are from the same generation!!!
Hey nice spot!!!! 👍🏻👍🏻
Hey, thanks!
Moving under the oak tree could be a dangerous in hurricane season, also very messy. I understand the shade trade off also. Keep those video's comming!
Hey. Yeah I know. I talked about that in the upcoming video. So Stay tuned ! Hahaha Thanks again !
Use a heat gun or torch to melt the glue on the tip👍
Didn't need to. I needed the old piece left on so the tips I had would fit better. Worked perfect ! Thanks for watching !
That's a much nicer lot. Now your a real "shade tree" mechanic. Lol!
Hey. Sorry for the late reply. I just figured out where all the comments are that I don't get notifications on from youtube. It's crazy! Anyway . Thanks again !
Looks like everything is coming together!! NICE
Hey. Yeah, Im gonna miss the 40 though Thanks !
Man that skull motor sounds good
It was a Rocket! Thanks !
I need to get a hold of you if possible? I'm in Titusville. I bought a Jon boat with an 88 Johnson 25hp outboard. Ran like a champ the first day on the water! I changed some old fuel lines and it hasn't ran right since. Revs up great in neutral, but put it in gear and bogs down bad! Got tired of messing with it so I bought a 76 Evinrude electricstart. Ran like a champ the first day! Then nothing. Everything on it was Jerry-rigged so I started replacing parts. Still not running. I'm an aircraft mechanic! I fix planes everyday, but I can't fix 2 outboard motors! I know you don't want everyone calling you, but maybe I could drop off one of these boat anchors and pay you to get it going? Thanks.
Brett
Hey Brett. Ive got your number so you may want to go back and edit it out. Anyway I dont know when I would be available to work on them. I'm so far behind right now its crazy. I turned down a couple of other people too. I've been very lucky that I'm still working through all the corona crap thats going on and I cant get my own stuff done. If things slack up I'd be happy to give you a call. I think what your looking at with your motors is basic stuff, The bogging issue may be as simple as the high speed jet/orifice is clogged in the carb bowl. You can find the manuals here, boatinfo.no.. Pull that carb off and take it apart, soak it in STP TOTAL fuel system cleaner for a few days. Blow it out with carb cleaner and check the orifice in the bowl, you should be able to see light coming through a perfectly round hole # 19 in the schematic www.marineengine.com/parts/johnson-evinrude-parts.php?year=1988&hp=25&model=E25RCCA&manufacturer=Evinrude§ion=Carburetor . Let me know what happens. I wish I had more free time. Thanks
@@THISOLDOUTBOARD1 Had to get back to virginia for a few days for work. Figured I would recheck the spark and the top cylinder coil wire fell out of the coil! And that was the coil that had better spark! 🙄 I have 2 new coils on order. I'll take that carb apart and soak it. Thanks
man i thought about you last week as i was in jacksonville florida i picked up a 16ft lowes deep v boat and a 1976 35hp evinrude
Hey. Thanks. Sounds good. Cant wait to get back to work on the Starcraft. Just been so worried about spending any cash with all this corona crap going on, but it looks like things are beginning to smooth out here. Thank goodness! Thanks again
Pretty nice spot to move
Yeah Finally got some shade! Thanks !
Lol Here in Texas we use cig lighter and heat it up pull it off and heat it up and push it on let cool and done hot glue stick if need more glue but you done good also great videos man
Hey Thanks ! Yeah I wanted to leave the old one on because the two tips were the larger diameter left overs in the kit and they usually come flying off when your fishing Hahaha. Thanks for watching and commenting !
alright bro, nice lot upgrade!! will they let you build a tree fort? lol.
I hope so! Hahaha Thanks for watching !
Hey old-school I use my lighter on them rod tips,it comes off very easy .then super glue together
Cool man, Thanks !
the tip is only glued on just put your lighter onder it and it slip write off
No. I needed to leave it on because the two tips I had left were a large inner diameter so it worked perfect. Thanks again for watching !
I wish we could fish here. They closed it all up here
Hey. Thats from all those boat parties people been havin. It will be over soon hang in the brother. Thanks again !
Some of the tips are held on by a waxy glue type material and can be removed with heat. I have used a cigarette lighter before to remove them.
Great tip!
wouldn't have done it any different cant even tell that rod was reguided, I also remove those safe things on non vented tanks gotta have a vent of some kind, the new spot your getting is nice but the mildew under them trees is gunna be a booger, stay safe out there for us bud.
Yeah. So are the skeeters ! Thanks again !
Heat it up and it will pull off
Hey Yeah. Thanks !
Hit tip with lighter to heat up the glue then pull off get a rod tip kit comes with rod tip glue
Thats what I used was my rod tip kit. Been in my tackle box forever. Thanks again !
Hello again! I was hoping you could give me some advice. I recently picked up my first outboard to repair and after watching nearly all of your videos I knew exactly what to do:). Long story short, Ive got her running like brand new but I would like to paint it before I sell it. I was hoping you could point me in the right direction as far as what type paint to use to paint it. Was thinking rattle can engine enamel from the auto parts store but unsure. Thanks man and keep the videos coming. We love um!
Found your vid on painting that vht engine paint worked like a champ. You da man!
Hey. Sorry for the late reply. I just figured out where all the comments are that I don't get notifications on from youtube. It's crazy! I see you got it done. Thanks so much!
So what do you think of the vro in a 1986 70 hp Evinrude
Hey. its an 87, and the VRO was removed before I ever started working on it.Thank the outboard gods! Hahaha Thanks for watching and commenting.. Stay tuned !
What makes them starters make that sound mine does on the 115
The bendix gets worn. Thanks again !
Hey dude, hope that helps and your doing good, oh yea are the early 60's Evenrude out boards like a 18hp fastwin are they easy to find parts for
Hey. Thanks. I never had any problems. Check marineengine.com and ebay. I buy all my parts from ebay. Thanks again !
Use heat gun, soften the glue, use some pliers and pull it off...
No. I needed to leave it on because the two tips I had left were a larger inner diameter so it worked perfect. Thanks again for watching !
Could you please tell me the name of the website with all of those online manuals that you mentioned in another video? I can't remember!
Hey. Its boatinfo.no................Thanks
@@THISOLDOUTBOARD1 Thank you sir!
On that fishing pole, can't you heat it up and the tip will just slide off
Hey. Thanks for tuning in. I can't remember! Hahaha probably. Thanks again !
heat gun will heat it up enough to remove
Thanks !
New tanks r non vented for epa compliance take screw out of top drill 1/8” hole now vented put screw back
Thanks !
My old Johnson 28 HP had a gas leak. Turned out the fuel Selinoid was cracked. Just replaced it and was ok
Thanks for watching !
That ain't string dude... IT'S "LINE"...! I would have used the larger eyelet with a drop or 2 of epoxy... It definitely starts better with the replacement pump...
Hahaha I knew someone was gonna say that. Thanks again !
How long do you spend casting before catching a fish... i usually give up after 10 to 20 minutes
I dont give up to easy. Takes me 30 minutes just to load the boat. So I'm out there 3-4 hours. Thanks !
I know ceramic
Thanks for tuning in!
Tip if you want to find a gas leak... use a lighter😂
haha