Stark 💪!! Die Kombination der verschiedenen Tricks, Techniken und Materialien ist echt faszinierend. Deine Videos haben sich bei mir zu einer sehr liebgewonnen Sonntagabend-Routine entwickelt. Daher an dieser Stelle ein dickes fettes Dankeschön. Freue mich auf alle Projekte, die wir in Zukunft noch von dir zu sehen bekommen.
Holy crap!! That is so sick! I reload ammo and gunsmith a little. I can think of a ton stuff I can use that on. I’m gonna make one for myself! Thanks 😊 for an amazing idea
Awesome as always but your little trick with your drill press and grinder on your threaded piece is deffinately going in my holster of brilliant ideas fine work my friend
That's a great idea and might be good to have an adapted version for a lathe as it would minimise back pressure. Would be good if you could narrate your work and tell us materials etc... Keep up the good work
Pedazo de trabajo amigo mis manos también hacen maravillas y se el trabajo k hay detrás de este video enhorabuena compañero 👍👍la mente mestra solo unos pocos nacen con este don 💪💪👊👊
Hi Habu ! Der Trick mit der Standbohrmaschine und deinem Winkelschleifer ist echt gut !😎👍👍Dein Rändel Handwerkzeug ist echt super geworden !Projekt gelungen !😎🤙
The things that I have seen you build and the knowledge you have makes you a very powerful and dangerous man I love it keep up the good work brother👋👋👋👋👋👋🍻🍻🍻🍻
Awesome idea, what about taking it further, have a similar style tool where a set of wheels clamp to round stock then you screw down a cutting tool and as you turn it around it shaves off some metal. Keep going until you have the round stock down to the size you want. One end of the stock would need to be in a vice obviously.
@@Nicosachero esos rodillos se llaman moletas o ruedas moleteadoras se venden en ferreterias industriales o casas que vendan herramientas de tornero. Las hay de distintas formas unas hacen tipo estrias y otras rombos como esas. Generalmente se emplean en mangos antideslizantes . Espero te sirva de algo ,yo soy de Uruguay . Saludos y a las órdenes.
That was brilliant! Thanks for sharing. If you ever attempted this again, you should make the c shaped part from a flat bar so you could clamp the tool to the vise. I see you are using a Femi ng160 bandsaw, now that you seem to have used it for a while, what are your thoughts? Thinking about getting the ABS ng160.
Nice project....your videos remind me of the 'Wordless Workshop' in the old Popular Mechanics Magazine..and I also like your collection of tattoo work...!
Great video, I learned a lot. I very rarely think this, but this video could have used some background music. The sound of shop tools sped up is very grating, like listening to fingernails on chalkboards. I didn't want to take my eyes off what you were doing to turn the volume way down, now I will have to watch the video again :) Thanks again for informative vid.
Felicitaciones, quedó excelente le herramienta!!
WoW!
I can't believe this tool has been made only by hands!
What an accuracy!
👏👏👏
Thanks a lot man!🤙🏼
أعتبر نفسي من المحظوظين للانظمام إلى قناتك الرائعة
ربي يسعد اوقاتك بكل ما هو جميل
Superb, thank you!
Man of many talents :)
I do my best! 😜🤘🏽
You are a highly skilled craftsman. Brilliant.
Coole Mütze!
HABU es ist unglaublich was Du alles machen kannst 👍🥇 !!!
😎😁 Danke
Stark 💪!! Die Kombination der verschiedenen Tricks, Techniken und Materialien ist echt faszinierend. Deine Videos haben sich bei mir zu einer sehr liebgewonnen Sonntagabend-Routine entwickelt. Daher an dieser Stelle ein dickes fettes Dankeschön. Freue mich auf alle Projekte, die wir in Zukunft noch von dir zu sehen bekommen.
Vielen Dank Richard 😁 freut mich zu hören 😉🤙🏼
This is excellent, thanks for posting. You have shown lots of good ideas in this video.
Holy crap!! That is so sick! I reload ammo and gunsmith a little. I can think of a ton stuff I can use that on. I’m gonna make one for myself! Thanks 😊 for an amazing idea
Few things are more therapeutic. Nice work, HAI
Wow, you should rename your channel "If you can dream it up, I can create it" Excellent work, true craftsmanship.
😁 Thank you very much man😉
I never know what will be the end of the tools you make 📐⚙️🔧🔨... I love it!!!
😁 Thanks🤙🏼
Hallo Hassan,
Du bist der absolute Hammer. Auf solch eine Idee erstmal zu kommen finde ich schon klasse. danke für das tolle Video. Gruß Hans
Vielen Dank Hans😉🤙🏼
Incredible skill and talented tool making. Thanks for sharing.
Thank you 😉🤙🏼
Awesome as always but your little trick with your drill press and grinder on your threaded piece is deffinately going in my holster of brilliant ideas fine work my friend
Thank you very much 😎🤙🏼
wow. he always presents the best ideas. thank you for sharing. go habu
Thank you very much man!😎
WAAAH! I'm blinded by the welding arc!!
Ok...😂
What a beaut!
I want it. 😢
Really nice work mate what a cool project thanks for sharing
Thank you very much man!😜🤙🏼
😲mußte ich mir direkt zweimal ansehen 😁
Wieder ein Klasse Werkzeug mehr 👍👍👍
😁 Dankeschön 🤙🏼
That's a great idea and might be good to have an adapted version for a lathe as it would minimise back pressure.
Would be good if you could narrate your work and tell us materials etc... Keep up the good work
Definitly a great machine bro!! Fantastic idea and great results!!! I wanna make one for me! I need it!!!👍🏼👍🏼👍🏼🙌🏼
Thank you very much man 😉🤙🏼
I like your work it's amazing!
Thank you!
Very beautiful and efficient tool .
Thank you
Echt cool, so was habe ich gesucht, danke für die Inspiration.
Amazing tool ! - Well done man.
Una idea asombrosa, muy buen invento, saludos desde España
You made a wonderful piece of work.
Thank you!
Absolutely love the process and end product. I would love to be able to make that Clevis the way you did.
Nice idea. You adapted a pipe cutter design to make a very nice knurling tool. Well done!
Thank you Jerry😉
Echt klasse HABU
Dankeschön 🤙🏼
Skilful work.
Thank you!
Wonderful design; great craftsmanship! 🙏🏼
Very very very very nice work bro
Thank you very much man!😎🤙🏼
Pedazo de trabajo amigo mis manos también hacen maravillas y se el trabajo k hay detrás de este video enhorabuena compañero 👍👍la mente mestra solo unos pocos nacen con este don 💪💪👊👊
Thanks for sharing your craftsmanship...Beautiful result.
Thank you!
MASHAALLAH GOOD JOB
Another one? Damn! Now I have to make one... Great job 🍻
😜🤙🏼 thanks
Very cool! I love knurling!
Thank you😉
Original HABU.💯....Video gefällt mir wieder richtig gut und das Projekt 👍🏻👏🏼....gut gemacht🎈
Dankeschön ☺️❣️
Have the same thing made with a vicegrip a few months ago. Works great.
Muy buena herramienta eres mi maestro 👏👏👏👏👏👏👏👏
Hi Habu ! Der Trick mit der Standbohrmaschine und deinem Winkelschleifer ist echt gut !😎👍👍Dein Rändel Handwerkzeug ist echt super geworden !Projekt gelungen !😎🤙
Vielen Dank 😎😁🤙🏼
Geile Idee so ein Handkordelwerkzeug. Top!
😁 Dankeschön 🤙🏼
Amazing work. Ten thumbs up! (since I have them I like to use them. 😋).
amazing craftsmanship
Well done.Very useful.
Geil hab ich jetzt erst gesehen 😍 geil 👍🏼
Gute Arbeit. 👍👍👍
My insporation brother..good job...💯❤👏👍👍👍👍
That worked better than I expected, great video!
Thank you!
The things that I have seen you build and the knowledge you have makes you a very powerful and dangerous man I love it keep up the good work brother👋👋👋👋👋👋🍻🍻🍻🍻
Thank you very much man!😉🤙🏼
@@HABU yessir✌✌✌💪💪💪
I have to go out and take a look at my copper pipe cutter.... That's what i actually thought this video was going to be, but it was much more.
Salut habu très belle invention 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Merci beaucoup😎🤙🏼
Awesome idea, what about taking it further, have a similar style tool where a set of wheels clamp to round stock then you screw down a cutting tool and as you turn it around it shaves off some metal. Keep going until you have the round stock down to the size you want. One end of the stock would need to be in a vice obviously.
Nice work and a great shop setup.
Thank you 😉🤙🏼
Saludos desde Argentina muy buenas ideas
Sabés cómo se llama ese rodillo??
@@Nicosachero esos rodillos se llaman moletas o ruedas moleteadoras se venden en ferreterias industriales o casas que vendan herramientas de tornero. Las hay de distintas formas unas hacen tipo estrias y otras rombos como esas. Generalmente se emplean en mangos antideslizantes . Espero te sirva de algo ,yo soy de Uruguay . Saludos y a las órdenes.
perfect. looks like video editing is also done by these tools :D
Súper 😀👍
Good tool you make thanks
Very cool. I especially liked how you used the drill press (I think it was a drill press) as a vertical lathe. Gives me good ideas
Thank you very much!
Wonderful
Thank you!
tu trabajo es muy copado e interesante de ver....
Gracias 😉
Guter Handwerker
I love the video so much .
If there is another button of like, I will give you a punch of likes.
Great work, thanks for sharing that video .
Thank you very much man!
Fantastico
So freaking cool. Way to be awesome.
Thank you 😎🤙🏼
Hammer was du gebaut hast . Ich hätte da die Idee vom habu icepicker . Ich kaufe die ersten👍👌✌
😂🤙🏼 vielen Dank Ahmet
Good job. It's good to see your workshop and business is go ahead. PS.:Sorrry my english, from hungary :)
Your english is good 😉 Thank you!🤙🏼
i had missed this one! very nice!
Thank you!🤙🏼
Very good and very nice👍👍👍👏👏👏💪💪💪
Thank you!
Best wishes brother's . I'm from morocco
Thank you!😎👍🏼
@@HABU you welcome boss you the best.
Awesome well done bro 👍👍👍👍👍!!!!
Impressed
Thank you 😉
Exelente trabajo Habu
Gracias😉
That was brilliant! Thanks for sharing. If you ever attempted this again, you should make the c shaped part from a flat bar so you could clamp the tool to the vise.
I see you are using a Femi ng160 bandsaw, now that you seem to have used it for a while, what are your thoughts? Thinking about getting the ABS ng160.
Brillant
Pretty cool, I enjoyed that
I like this video style. Similar to diresta
Nice brother
Impressive mate love the idea well done ...
Thank you!
Genial trabajo como siempre. Saludos.
Gracias😎🤙🏼
...молодец ХАСАН отличная ручная накатка получилась😉..!
Awesome...
Bela ferramenta e bom trabalho
Cool knurling tool. Nice video. Mahalo! : )
Thank you 😁🤙🏼
Nice project....your videos remind me of the 'Wordless Workshop' in the old Popular Mechanics Magazine..and I also like your collection of tattoo work...!
Thank you very much 🤙🏼😉
Beautiful tool and perfect work 👍🏻👊🏻
Thank you 😉🤙🏼
Great video, I learned a lot. I very rarely think this, but this video could have used some background music. The sound of shop tools sped up is very grating, like listening to fingernails on chalkboards. I didn't want to take my eyes off what you were doing to turn the volume way down, now I will have to watch the video again :) Thanks again for informative vid.
Very excellent work
Bravo
Amazing skills
Awesome!! That works perfectly!!
Thank you. 😉🤙🏼
Looks alot like a copper pipe cutter hmmm🤔😂😂 Nice job
😂👍🏼
Fantástico camarada
Sehr schönes Werkzeug. Klasse gemacht Daumen hoch natürlich 👍 👍 👍 Gruß Martin
Dankeschön Martin😎👍🏼
Amazing idea bro 👍👍. The sound and the video are great! By the way, which microphone are you using?
Thanks man! It’s a Rode shotgun mic…
@@HABU Thank you bro 👍👍 waiting for your next project
Super!!!
😎🤙🏼
PERFEITO
Obrigado!