Phantom 85 [V3] - No Motorized Bike Engine Will Go Faster At This Price!
Vložit
- čas přidán 26. 02. 2023
- Please subscribe for more! Today in this video we will unbox, install and review the NEW 2023 Phantom 85 [V3]. This engine just got affordable, faster, and more reliable. Out of the box we did 41MPH without tuning, breaking-in or modifying. I wish that more folks get to know more about this engine.
Link to the engine kit: www.bicycle-engines.com/ztmot...
Complete frame: www.bicycle-engines.com/zeda-...
Gold gas cap: amzn.to/3XZuH9r
26” 12G Spoke rims: amzn.to/3JavKOr
Valve stem caps(purple): amzn.to/3IC7VPi
Seat post clamp: amzn.to/3kz1Rzi
Pedals(purple): amzn.to/3Z3jGW7
Dual brake handle: amzn.to/41sPJjT
Pipe silencer: amzn.to/3SzoyQ9
Bike lights: amzn.to/3SzoyQ9
Handle grip(purple): amzn.to/3kB2iJ9
Thumb throttle: amzn.to/3ITqiQb
Purple Skeleton decal: amzn.to/3kt7dvT
#phantom #Phantom85 #motorized #2stroke #engine #bicycle #gas #fast - Zábava
dang man straight full throttle on a brand new engine.
and pops the clutch and immediately starts going doesn't even hold clutch in to let it warm up after it starts
I own a MB shop. These little bikes are so much fun. My oldest is a 66cc 80😂on a Schwinn Point Beach. 12 years old, bought the bike & kit at he same time. Rode it again today. 😎
Then I need you're help...where are you located please ?
Central Mass.
Dude it don't matter where m I at...
Yeah .it's fun .
I got nine builds in the belt
these are awesome motor kits have built 3 now and all great 50mph after breakin :)
what mods?
@@rylibritton8406none mines stock got it up to 51mph
Im about to order mine right now. Thanks for putting me on to this!
Speed! Oh boy to be honest I'd be geared up going that fast. Knee and elbow pads just in case. I love my Evercross H5 but have to admit it does struggle on inclines and I often think I could use something like what you have a gas powered engine. Normal flat surface I get 27 mph and even that looks fast. 😄 Awesome job.
😢😢
Another great video. Thanks for Sharing bro Finally got nice weather up here so I got my bike back out finally so I can start making videos again
Hey brother thanks for posting. I planning on making my own phantom cause it just seems like the right move. Definitely need all that power.
Very nice I will be getting that engine soon thanks for reviewing that engine.
Nice content my guy!
Nice clean build, keep up the great videos! Bikes by Bill.
I got hydraulic rotor brakes for my new build jokester but they are still a line pull. The kit wasn’t expensive and it was really nice to have a basic easy setup that just bolts up to a stock set up and still have great clamping force. I read the other message we’re you mentioned you wanted to upgrade. I got purple too for my color since you want that color scheme too. Hit me up if you need a link and all.
Depends what you call expensive 🫰 dude
@@musaguz6783 it was 40-45 bucks for two hydraulic calipers and cables and 2 160mm rotors in chosen anodized color. So to me that seemed like a really fair price
I so wish they'd make a full suspension Felt Faker type motorized bicycle frame that could run either 26 or 29in wheels. Even a cheap rear shock is way better than a hardtail. It'd take lot's of stress off both the frame & Rider. You could upgrade to better forks & rear shock that have true compression, damping & rebound function. Maybe also add mounting tabs on the frame for optional jack shaft kit. Full suspension Felt Faker with 203mm F&R disc brakes 👍
good stuff keep it up bro
Nice runs just like mine once it's heat soaked you can bring the rpm down by letting off the throttle for a few seconds then clutch it works well for me running stock as well 79kph has been my max speed. My homebuild shouldn't go that fast but it's fun.
Fantastic project!!!
I still running gen 2 ⚙️ still running good
Nice run
Awesome vid
nice build
These little engines are so cute. I’m going to put one on my bike.
That can work?
Nice vid bud! She's nice...and stock.😳...I mite just have to put my china doll on the shelf this summer.
I have a 212 predator 6.5 horse motor on a modified mountain bike only modified for the wheels though the motor fit right inside the frame I do about 44 + miles an hour and it goes uphill like any other bike that has that torque to go up I have a torque converter on my bike and I get many miles out of my belts motors very reliable
Don't know why his bike went 40 plus but he should of Easily hit 50+ with that set up. My BBR100 goes 44mph that I got from Bike Berry, a couple weeks later the 100cc V2 came out. I missed on getting the better Version. I do have the Phantom V3 kit just waiting for the bike so I can install it. Lots of fun
@@lonneebelton9806 motorized bikes are lots of fun no matter what kind of motor you put on them as long as they're reliable to do their job (motorized bikes 4life)
And my motor does the job six-fold best motor I ever put on a bike 212 predator 6.5 horse that's where I'm going if I upgrade I'm putting a the 15.8 459cc predator motor that may be my next upgrade
@@presleyfleckmotorizedbikef4285hi mate I’m looking at building one, what engine do you Segway for decent power? Cheers
Great for tension relief, after day of working!, great hobby if ya love tinkering
I'm buying one really soon that was sweet be great to ride back and forth fishing it would cost next to nothing for for gas
My new imaycc 80cc engine stock out of the box I got up to 35 mph with a 44 tooth sprocket I'm still breaking it in I ran one tank of gas through it so far. But I like your build that frame is nice I want to get one of those and I like how you went with the purple skulls and other purple parts it looks awesome my dude...🤙👍
I have the same kit doing 40 with the exhaust cap off. Does yours seem just a little sketch? I want a more reliable fast kit the imc seems like junk. Works for now for how long tho not sure
The one I got, the clutch plate flat nut , wasn't even screwed on buy 1/2 thread, clutch wasn't catching
Looks awesome brother I have version 2 but I did some of my own stuff on the inside like you I swapped it for stihl products on the inside and it working ok for right now ride safe brother I'll be watching for your test ride
Holy smokes you definitely need to upgrade the Brakes eventually.
Yes sir, going with hydraulic soon
More like immediately
You went so fast the front tire looked glitchy 😆. U almost traveled back in time.
Question for you What oil ratio are you using mine v2 is still 20:1 can I go less temperature only gets up to 235 degrees?
"No Motorized Bike Engine Will Go Faster At This Price" hold my Dremel.
Got my bullet train electric start completely rebuilt with a billit machined liquid cooled head forged pistons crank and Conrod were already pretty strong double spark plug ports 2 stroke EFI & a smart carb water pumps are electric too so no power lose as if it were a crank driven pump & alternator already uses crank power amazon exhaust with expansion chamber and a welder shop did all the measurements for chains and gears to gear the engine to the crank peddles cut the peddles and cranks off so its balanced & just a gear welded a stationed gear from the engine to the crank and was able to use a regular bike chain from there with a mountain bike 6 or 7 speed transmission ran on ethanol with 2 stroke oil never could dyno it but it blew up the CVT clutch after a burnout drove it but was scared to reach top speed but id say i hit probably almost 90 mph 6 gear and was 70% throttle at like 6,800 rpm running at like 190 degrees after a warmup id say maybe making like 15/20 hp had a cheap engine temperature tack and rpm reader you can get for like $15 or less on Amazon its pretty accurate just gotta wrap a wire around a spark plug and go into the settings and set it for 2 stroke engine
Mine will be in tomorrow
Hope you enjoy and break it in for a little, mines still running strong for months v2
Cool
What should my mix ratio be for the phantom? For brak in?
You never mentioned what size sprocket you chose ... Thats really important in regards to the top speed ...36 tooth 44 tooth or 48 tooth ???
He said 36
The very first part of the unbox was the sprocket. I believe he said 44 tooth.
Awesome
Hopefully they keep em in stock.
How were the stock rims were they decent ? What gauge spoke were they?
does it still have torque with the 36t sprocket to go up steap hills??
Kindly question can we remove the paddle part and change to normal steel pipe to make leg balance like normal motorcycle and we change the start button to make the engine work without paddle
People put predator 212s on bikes and the normal one makes double the power than the phantom, the kart racing version could probably push even more. The engines are also cheaper.
Hi may ask ask if you are using stainless rims or aluminum rims?
wow that's amazing. i was hesitant to buy a v1 or v2 phantom in the past hmm so i did'nt, but now i will soon buy v3. do you have an online link to the manual booklet @1:25 ?
the stock tensioner tends to twist inwards towards the wheel, and it would wreck the spokes. @10:35 have you upgraded that stock one ? and what other tensioner did you choose?
Nothing gives you more Dopamine than riding a slow bike fast as helllllllll
One day, i will make one that goes fast as well
Phantom 85 v3 with different carb and boost bottle? How fast will it go and what parts you prefer to use?
Ive had a ebay kit bolted to a cruiser and got 36 out the box with air box off and exhaust debaffled...80cc
I've been through 2 now. Not sure what I'm doing wrong but I use the best oil and on the first the piston melted to the wall in 7 minutes. I love the power but haven't had any luck with them
V3 ?
Hi there , love your videos, looking for some advice, I am hoping to bring a bike and motor on a flight Newark to Havana Cuba , I live there during the winter but have no transportation. Could you recommend a bike and engine combination that would be reliable, need good suspension as the roads are non existent. I have basic tools in my house but I could buy in the states what I need , would you recommend 2 of 4 stroke , I don’t need to go fast because the roads don’t permit it but I need reliable machine as my wife might also need to use it and I don’t want it breaking down all the time . Best regards John .
You should get yourself a standard PK80 66cc kit. I'd suggest you dont buy the cheapest, nor the most expensive, but something in between. AVOID BIKEBERRY! The normal 66cc kits have everything you need, but the first upgrade you should do is a new #41 chain. The stock kit chains are trash and will fail quickly. I suggest you build it ahead of time and get all the little china crap fixed before it becomes critical. These bikes ALWAYS go through a phase where everything gets loose and you need to sort it out to get reliability. Once you ride it a few days or weeks, it will kinda "take a set" and stuff stops falling off (assuming you fix & tighten) You also need to check Cuban laws as these bikes might not be legal, depending on the area, etc. I know a couple guys in Cuba who ride, and they mostly complain about not being able to get any parts. So bring your own spares and you can probably get back some of your investment by selling the bike/motor when done. They eat up parts when available like crazy down there!
Yhi my name is joey I love it like that bike alot just wondering if you got one for sale I buy it
Do they make a quiet muffler for gas motor bicycles
if you could reply that would be great
How fast were to able to after break in and how far were you able to go on one tank
thinking about getting an 80-100+cc bike to get to the next town for school it’s about 8mi there.(i can leave gas at a friends house so getting back won’t be an issue) (with 6 miles on a county road)
don’t want to pay car insurance get a car because it will prob cost me more
What's the fastest engine kit I can get for my cruiser deuce bicycle? I need it for work!!!
How is Phantom eighty five running❤
how well does the Engine break work does it slow you down?
I bought one of these and I am regretting it big time having a very hard time with those damn piston clips
Chain clip should be going towards the motor
how are these motors for mountain trail riding? can they handle steep hills etc?
More for a cruising experience
gear it down. 72 tooth on the back and a small drive sprocket. your top will be slow but you'll climb hills without slowing
What was the name of the bike frame? You put the engine on.
isnt the wrist pin supposed to have a needle bearing?
What ratio do they recommend for break in? I heard 20 to 1 but that's a lot of oil
20:1 is good
@@catsnponds5959 I'm way passed the break in now
40:1 since day 1 is the best imo or you can start at 32:1 than switch to 40:1
Must save !
Where did you get the vented gas cap from?
On Amazon
What kind of gas are you supposed to use for this bike?
How do I get it fully assembled?
My angel fire 66/80cc from BBR hits 60
This is the one
Top essa motorizada
Where can i get a frame like this?
How much do you weigh? My Phantom only reaches 40 mph with a 36t sprocket. I want more
225. You might need a better carb. I installed a 23mm oz reed intake and added a mikuni vm18-144 carb and tuned it. Now my bike does 47 with the stock pipe. I should do 55-58 with a real expansion chamber.
@@MJTechChannel thanks a lot.
@MJTechChannel I'm putting one of these on a chopper bike soon. I'm getting engine and components that you mentioned. How do you go about "tuning it"?
I want instead of motor gasoline engine, change to e-motor and how much it cost?
How is a Phantom 85 running?
WHAT IS GAS MILEAGE USING “”THAT GAS TANK””? IS THAT GAS TANK SAME CAPACITY AS OTHER KIT’S TANKS?
What is the difference between V1, V2 and V3 kits?
Same displacement and power, just quality has been getting better and they redesigned the cylinder for it to be durable.
I had this type of bike. But had work done to the motor. And mine went 60 mph
Is it reliable for long daily rides?
same question that i have since i feel like taking one to work
Is that mph or kmh?
a firestorm will get you 40-45 stock out the box.
I am doing a comparison soon
It won't do that stock
I want to get one for work, but I am sure that the cops would pull me over; It is so loud.
You can add silencers
@@MJTechChannel what are these silencers? And where do I get them? Thanks.
Like the bike can I buy off of you
It is for sale now
@@MJTechChannel hi great video I just picked up a used f-zero please help what engine would you put on this I like this engine alot but I'm so undecided I'm sking please what engines would you go with top 3 in order
How's your quiet suburbia now brrrtrrrrrrtttrrttttt
40mph??? Take my money!
Holy shit
i bought v3 but on the sticker it says its v2
This is as fast as a Wired Freedom full suspension fat tire E bike.. Just much noisier.. I think I would go for a quiet muffler..The E Bikes are pretty much legal ... Not sure about 85cc gas motor bikes.
That's annoying me that we can't get them without having to pay 200€ for shipping in europe
It's bigger tail muffler hold.
Where is your gast tank?
Built in to the frame
Majy And Jay
Had to delete the comment I put because bicycle engines was upset with me for calling it Gen 4 💀💀💀💀 I apologized and brought up the phantom 85 exhaust issue with it breaking, and to no suprise, they went silent 🤦🏾
For me it’s version 6 according to them they give me the absolute most unprofessional hard time idk why it’s crazy
@@joebrown967 they definitely don’t seem to be very professional, especially the people who run the social media and emails. They know almost nothing about motorized bikes.
@@fabianse you couldn’t be more right
Can you make me this exact color and style bike I'll pay cash
You haven't broken it in yet!!!!
"No Motorized Bike Engine Will Go Faster At This Price!"
A cheap chinadoll kit for $100+ that's ported well (and tuned etc) can go faster than 50mph on smaller sprockets.
Wheres the brakes?
You want a mirrors on it.
Can you peel the sticker off? I don't like the look of it :D
Insane? sounds like something a little girl needs!
W
Ok great! But you needed to provide the most important link: “The Bike Frame”. Just a John Doe name doesn’t help. Thank you.
Got a link for you! Check it out.
A motor runs off electricity, what you have is called an engine, it’s naturally aspirated with a carburetor that runs off gasoline. And that would be called a skull, a skeleton is a human body with everything but the bones missing.
🤓🤓
only problem with motorized bikes is because its a bicycle you feel comfortable wearing a helmet with no face protection and a short sleeve tshirt and shorts. an actual motorcycle is safer