Ibutton work with SD card Mobile DVR,protect driver and fleetmanage know everything.

Ibutton work with SD card Mobile DVR,protect driver and fleetmanage know everything.#mobiledvr
0:04 1..wiring
The following is the MDVR8204SH and I BUTTON connection wiring diagram.
First, we will connect the I BUTTON's red line to our MDVR8204SH OUT_IO3
Then the I button’s black wire is connected to the GND of 8204SH
Then we will connect the buzzer's red line to sensor_out1, then connect the black wire to the GND of 8204SH
Connect the 86 corner of the relay to sensor_out2, connect the 87a and 30 of the relay to the engine line and ignition line of the vehicle, and connect 85 to GND, so that when the card reader successfully swipes the card, sensor_out2 outputs a low level, so that the vehicle ignition and the engine are combined and will work together
Then the Wiring connection is completed
--
0:58 2. Configure the server to support driver card synchronization
First open the server installation directory
Find bin in the installation directory
Find the plugin---MDVR---808config.ini file in the bin directory
Right click and select Open with Notepad
Add EnableRm905Driver=1 below and click Save after adding
Restart the gateway server, click and wait for loading
After loading, click close
Wait for the completion to set up successfully
--
1:56 3. Add driver information to bind the vehicle
Next, let’s start adding the driver information
Open CMSV6
Find Manage, then Operations and click Driverinfo
Click Add on the Driverinfo page to add
NAME: input the Driver's name
Company: Select the driver's company
ID Card No.: ID card number ( this does not affect the result, but needs to be filled in and cannot be empty
Contact details: mobile phone number (cannot be empty)
Portrait library: Select the driver’s picture that require authentication
Certificate Code: input the I BUTTON's card number
License No.: select the Driver's license type
The driver' s License Expiration date: Validity period of driver's license (check for long-term storage)
Click Save to create the driver’s folder
Then Add a vehicle for a driver
Select the vehicle to be bound
The driver is bound to the vehicle
Then click save
--
3:23 4. Set up card number synchronization
When our device has reported to the platform, the card number is also bound to the vehicle
First open the menu and enter the password: 999999
After entering the menu page, click Tools
Enter the Tools subpage,then select Driverlist
Put Enable ON and click to save
Finally, cut off the power of the device, and the card number will be synchronized after restarting the device
--
4:01 5. Device and CMSV6 card number synchronization demo
Here is the Card number synchronization demo
When the device is powered off after
and goes online, the device will interact with CMSV6 to synchronize the card number of CMSV6 with the card number of the device
Enter the menu to view
This is where you can see that the driver card number bound on the platform has been sent to the device
--
4:38 6. Driver ACC card swiping demo
This is the ACC power-on card swiping demo
When the device ACC is shut down
Using a a multimeter, Test The voltage of sensor_out2
After the device ACC is powered on
After the buzzer sounds, the device will make The voltage of sensor_out2 pulled high
If the relay is connected, the engine line of the relay will be disconnected, and the vehicle cannot be ignited at this time.
The buzzer will keep beeping to remind the driver to swipe the card
If the card is not entered into the vehicle’s information, the voltage will not change after the card is swiped, and the buzzer will still sound
When the card is swiped is correctly
The buzzer will stop beeping, the voltage will return to 0, and the relay will be disconnected. At this time, the ignition can be normal
--
5:45 7. Driver credit card report query
Query the driver's card report
First click Manage, select reports, then open Driver RPT in reports, select the second Driver punch Card Detail
enter this page, Select the time and click Query, we can see a start and end time when the driver swiped the card.
#QOHO