VW Coding - I Totally changed How My VW Atlas Drives with a cheap IOS App.
Vložit
- čas přidán 6. 09. 2024
- In this video I perform coding on my 2019 Atlas SE with 4 motion with Car Scanner Pro (IOS version). I show viewers how to unlock features on the 4motion, stability control, torque management and steering assist to totally transform how the Atlas drives. All said and done there is a lot of fun to code out on all VW MQB platforms.
OBD Scanner:
www.veepeak.co...
OBD App:
Car Scanner App -www.carscanner...
Now ten days in and the Atlas drives really well, hesitation gone and performance greatly improved. Thanks for your insights to how VW sets up their cars to be ordinary. Highly recommend to anyone with an Atlas that disapoints.
Do you know if this will void the warranty
Hello, almost a year has passed, is your four-wheel drive system working properly? Have there been any faults? Thank you!
I just made these changes on my 2022 Atlas Cross Sport. The truck drives so much better now. I hated that lag on throttle. I wish I could buy you a beer!
I made the changes to my 2020 Atlas Cross Sport & it finally drives closer to what I’d expect from the factory! I hated the throttle response before - the Direct is so much better! I prefer the High Power AWD feeling as well, much more like my Audi. Thank you for sharing!
Note, the Coding icon doesn’t appear until after you connect to the car. Also, I was having issues connecting so the developer recommended pushing the scan tool in a little bit more & it worked perfectly on the OBD-II / EOBD connection profile.
can i do same thing with my tiguan 2019 highline ????
Hello, almost a year has passed, is your four-wheel drive system working properly? Have there been any faults? Thank you!
yOU CANNOT EVEN THINK HOW HAPPY i AM 'CAUSE OF THE vr6 STILL PRODUCED
I made these changes to my 2022 Atlas Cross Sport yesterday and the results are amazing. Not earth shattering improvements in performance but the car just feels much more responsive. Thanks for a great video.
Hi Brad, I'm glad you are enjoying the coding improvements so far. There is a bit of a learning curve to this but its not too steep and it looks like you are getting the hang of it.
What profile did you use ! I haven’t been able to pass the connection step, I have the vr6 version
was it hard to do?
@@charlessierra317 I also need the correct connection profile
I made these changes with OBD11 and I thought the engine drag torque control made a significant difference in the lag on acceleration. Sport mode just changes shifting points this makes it more responsive. Thanks for sharing.
Hi can you pleass assist with the steps using odb11.. thank u😊
Hello, almost 2 years has passed, is your four-wheel drive system working properly? Have there been any faults? Thank you!
@@azhou9581I haven’t had any issues yet and I have 80k miles on it.
So , got the necessary from Amazon and bought the app. I'm in Canada so the Pro version is $10 Canadian . I did not do the steering wheel weight adjustment as that never seemed an issue for me but the change in response for the rest of the changes is amazing. What was a boring SUV that I occasionally regretted buying now drives very well. Thank you.
glad to hear it...enjoy!
Hey. Does Warrenty get effected in any way?
Can you lead me how to completely disable the start-stop function?
I hope you can give us an update on your vw atlas. Any changes or modifications?
Thank you so much worked on my 23 taos se i was going to sell my car now it works the way it should
I have the 2019 year model sel v6 and the key fob function for opening and closing the windows as well as the tailgate works perfect from factory!
@frankizmo what’s the screen on top of the dash
Have a 2019 as well, will try all of this and let you know thanks
So two years later and I would be interested to know how it’s all still working out
Hoping I can use this to figure out why all my trailer lights don't work. Did not have the factory hitch, installed one using all vw parts, vw trailer installation kit, vw wiring harness to the hitch, everything works but the brake lights. Running lights as well as Left and Right turn signal works on the trailer so it can't be a bad connection, brake lights on the vehicle work just not the trailer. Seems like the problem should be in coding somewhere.
Did you install the trailer recognition module along with the wiring harnesses?...I recommend you look up Atlas hitch retrofit within the VwVortex forums to confirm. Additionally there is some substantial coding that needs to happen in order to get it to factory spec....search Ross-Tech hitch retrofit to get more insight on what needs to be coded
@@Pancho4dummies Yes it has the VW factory trailer installation kit, VW put the kit in some time ago and coded it to work. I don't remember the brake lights not working back then but noticed it lately. Pretty much has to be in coding as the brake lights work and the module sends signals back for blinkers which are the lights used for the brake lights. Ross Tech device is 199 and I already have a Veepeak OBD-II scan tool but am not familiar with what needs to be changed. I am tired of spending money on this thing, I imagine VW will charge $100 just to plug in and check coding. I can buy a Curt module that plugs directly into the VW trailer lights for $70 but hate to waste all the time and money installing the official VW module and wiring harness. Likely a simple change but have not found anyone who knows how online.
For the window gadgets i have carista and i got darn near every option activated on my 19 Atlas SEV6
What do you need aside from carista?
Super interesting! Got a good laugh over the spelling of algorithm. Evidently the developer is from a non English speaking country - I’m guessing Asia. Algorythm! Too funny!
Can you show the adapter n how it plugs into my Atlas n into your iPhone?
Hi Franki thank you for your informative details .. i have odb 11 pro can i do the same with it? Can you please guide us how
Can somebody tell me that name of the adapter and how to connect it please?
If you're in Florida, can I come to your house and have you code it for me I'll pay you..?
If you are in the central FL are we could meet somewhere
Hi, thanks for the informative vid!
I just upgraded from a ‘19 SE w/tech to a ‘22 atlas SE w/tech. I didn’t realize when buying that it does NOT have ‘lane keep’ as part of the ‘lane assist’ like my ‘19 had (what the heck VW!!)
Is this somthing I can adjust with this app?
It also does not have ‘travel assist’. It does have the standard ACC and lane change assist.
Thank you! 😁
Im an unsure, will have to check. I haven't fiddled with those options specifically
@@Pancho4dummies what is the profile for an atlas?
The new version of the app has several options for the "4WD OPERATION MODE" and. breaks down Diesel and Gasoline. Which one of the gasoline do I choose? There are 8!!
I saw that....basically the software is allowing you to choose the harmonic setting per gear (gears 4 through 7+)...I would stick to just coding the first option (operation mode...low/mid/high power settings). The other options don't offer a descriptive selection of choices so you are basically coding in the dark and might end up with unwanted drivetrain vibrations or sounds.
Can you code the transmission from staying on 3rd gear while slowing down and making loud noise. I have to shift to second to stop the noise
Unfortunately not
Will these settings be applicable on a 2024 model?
Does this have to stay plugged in for the coding to stay active or does the car revert back to factory programming when unplugged?
Once coded you can unplug, the only way to loose the coding is if the dealer decides to update the firmware during a visit.
I’ve had my 2021.5 Atlas SEL V6 4MOTION for about 2 months. Two things that bother me most is the throttle lag and the engine auto stop/start. Can I change this with this app?
The auto stop/start can be coded with the app. As for the throttle lag, there is no codable parameter for that. You would have to install a sprint booster or some other brand.
Driving it in S mode is perfect on these Atlas SUVs, it is not a GTI S mode where it revs really high, in the Atlas the Sport mode keeps revs right where the power band is for daily driving while having a more responsive gas pedal. The Jetta is the same way. :)
Im interrested to jnow how to eliminate the auto start/stop while driving. Can you show me how. Cant find a video for it..
I was thinking to buy the obd11 but its more expensive and need to buy credit do you recomend or this one is fine?
great video, very easy to understand. i love it - how much did it affect your gas mileage
Mileage depends on how heavy your foot is 😁....otherwise it is unchanged
Thanks for the video and links. I did the coding last night. Noticed a nice difference. So then tried to code the key fob windows up/down and 4 blinks but they didn’t take even though it said it was accepted. Any thoughts? Thank you
Im not sure on this case but when coding doesn't do anything its usually cause those settings need to be changed somewhere else...it could also mean that those settings are not applicable to that specific module.
Hi, I just checked the app ( Canada version) and there’s no vw ATLAS car in the MQB list.
My 2021 Atlas CS Accepts almost all codes under MQB
I can't get the app to connect. I'm using the same app and same code reader. Is it different with a 2023?
Can this turn off locking you out of the infotainment system settings while the car is moving?
How do you go back to original settings if you want to change one back?
can you disable auto shut down the angine when stopped.
Depends on what generation Atlas you own. There is a way to code the shut off so that it never activates for the 1st generation atlas but there is no way to code the shut off on the 2nd generatiom Atlas.
@@Pancho4dummies Thanks. My Atlas is 2018, I guess its a firs gen?
@@Pancho4dummies For a 2019 SEL 4Motion v6, can you let us know how to do the Disabling of the Auto Shut Down. I noticed there are 3 options on the Car Scanner App?? Not sure which one works?
Love the video, can you please add the links for the scanners and the app you use? Thanks.
Thank you, links added.
Has anyone had success disabling start/stop feature using Car Scanner Pro? Other coding from this video have worked, but the three methods, climate unit/temperature/voltage methods for disabling start / stop say they are “active” but don’t actually disable it.
The only way to disable the start/stop is to re-flash the engine control module with the option disabled.
@@Pancho4dummies is this long coding or In one of the other groups?
with Carista you can simply disable it. did it on my wife's Atlas
@@rx7outlaw whats carista? Thanks
Did your dash now display “please have your car inspected” after making changes? Also, is your car alarm going off randomly?
none of either things happened to me...run the scan for error codes.
I’m getting new value rejected unknown error for all setting changes I try to make. Any help would be appreciated.
If you have a 2021 Atlas try opening the hood (and keeping it open) while you do the coding.
does using the veepeak scanner with the same app you’re using give you the same capabilities that obdeleven has?(except the central electronics or has that been added?)
It allows you to perform coding but its limited to that as opposed to obdeleven which allows you to perform other functions.
Hi Frank, about changing Haldex operation mode to High Power: is it stiil safe at high speed, especially in corner?
More haldex clutch engagement will inevitably promote more wear but I don't know to which extent as I don't have, and haven't seen long term reports from other vw enthusiasts that have done the same coding mod.
Can I use this to reset the ESC? Just changed the battery and my start stop and lighting s kind of thrown off
Just drive the car and the light will clear...no need to reset anything.
I bought a 2022 V6 Atlas cross sport and only found out later it doesn’t have navigation system equipped. Is this something I can add to my car with an SD card or the coding app?
The infotainment module on your Atlas is different from models with the nav system so you cant just upgrade the software.
Hey. I know this is an old post. Just picked up a cross sport and it’s a dog on the highway trying to make some moves. Actually feels unsafe. Anyway, I download the app and I’m trying to input the correct car information but there are so many different items to press and nothing really says atlas SEL V6.
Check option for MQB chassis...that should work
Ty. I meant from lack of power. Truck doesn’t down shift when pulling a move on highway.
Is the app safe do you think? and won't cause damage if you follow your steps?
I’ve used the app extensively with no issues...the risk is in the user not coding the right module or code. You should be fine in follwoing the right steps
What is the second screen on dashboard ? And how you can put it their ?
it's an 8" android tablet. I use a magnet mount
www.ebay.com/itm/402683148899?chn=ps&norover=1&mkevt=1&mkrid=711-213727-13078-0&mkcid=2&itemid=402683148899&targetid=4580771609027686&device=c&mktype=&googleloc=&poi=&campaignid=410488085&mkgroupid=1234751784745161&rlsatarget=pla-4580771609027686&abcId=9300488&merchantid=51291
I just bought an 2022 Atlas SE and the sound system really sucks, do you know something I can do about it?
There's a couple of thngs you can do but could be labor intensive. VWs typically have low grade sound insulation when comapred to Audis and BMWs. I would look into that first, then look into upgrading speakers/amps.
Thank Frank, what happens with the car warranty when you do these? Could the dealer revert these when taking the car for service?
To this day I haven't heard of any case where coding has affected vehicle warranty. Coding can be reverted specially when dealers install software updates.
I can’t get mines to connect with iOS 🤦🏾♂️
Coding and service tab doesn’t seem to be there anymore. Any idea why?
Yea I don’t see the coding and service option anymore. Is there a reason ?
Nice Video Frank! Did you mount a Tablet above your Stock Entertainment Screen? Thank U
yes! easiest way to use the coding apps on the go.
@@Pancho4dummies Can you tell me how you mounted the tablet in that area? What do you use tablet for? Thank You for your response
You know, I thought the atlas felt way too laggy for the vr6 engine in it. I have the 5 seater and it just doesn’t pickup like I though it would. Might have to try this
Any updates?
I ended up with the 4 cylinder turbo because of this exact thing. Just has more torque down low. Lemme know if you tried it out.
Is there an option in the app to disable the Auto Start Stop function?
There is a b2fab harness, and or an I.E. power tune for the 2.0T that automatically disengages it, but keeps it usable, so you can still actiavate it with the button if needed. I hate that thing :)
will that void the factory warranty? i have a new 2022 cross sport and im super interested in doing this to mine
No, the Magnusson-Moss act from the early 1990's prevent dealers / manufacturers from voiding warranties like that.
Are you able to change the power steering option in the car settings without the app?
The only other way I know to change the drive mode is in the center console knob...Eco/Sport/Offroad, or pulling the shifter into sport mode, that automatically changes the steering mode into sport.
Looking to buy app and device I have a 2018 Vw atlas and looking what profile do I use?
I've always used default profile...haven't touched it
In Car Scanner app settings, what do I choose in Connection profile? I have a VW Atlas and I chose OBD-II / EOBD 1.0L-2.0L TSI/TFSI CAN-UDS + AT/DSG MQB, but ECU won’t connect. I got a warning message that I selected wrong connection profile. Says my car uses 4 (ISO 14230-4 KWP) 5 baud initial, 10.4 kbaud
You'll have to choose different profiles from the drop down and see which one works. For the Atlas the default profile works right away.
@@Pancho4dummies not sure what is the default profile, but I tried again. Chose VW first selection for OBD-II/EOBD. That didn’t work so I then chose Other Brand OBD-II/EOBD. That didn’t work either. ELM immediately connects, but ECU tries under automatic then tries to detect protocol then get connection problem pop up that says ELM327 wasn’t able to establish connection with your car. Any suggestions?
@@cobieone I had the same issues. Turns out you have to push the scan tool in just a little bit more. Connected perfectly every time after that on OBD-II / EOBD
@@deesnuts17thank you!!
can you link the app and module you are using please and thanks great vid
i found the links..thanks
Can you check your app? I bought the same app and device and mine does not have a coding option.
Just connected the app to my Atlas and I do have the coding and service available. Was able to read the modules with it too.
What is that extra screen you have up on the dash?
8" tablet with the coding app.
Will this work with 2020 models as well
It will, works on all MQB platforms
How is the mpg after the new settings ?
Did it change much?
I haven't seen a difference...it really depends on your driving habits
So if I get the cheapest version, is the car is set for life after tuning or does it go back to normal after the app service expires. Excuse me but I know nothing about these tunning apps.
This is not a tuning app but a coding app...it changes software options on various modules. It does not change or affect the tuning the engine management unit at all. All the changes that you make are saved and will not revert back up until you change them back to original settings or any other setting.
@@Pancho4dummies ok do you know of any apps that I can use to tune
Has anyone used this on a mk7 Jetta?
did you try "autohold" feature activation'?
I have not
Will this work with 2021.5 Atlas SEL Premium?
Yes it will
What was the app for iOS?
Can’t all these settings be accessed by the knob on the console?
Do you know 8:50 if it was added as of now?
It is
No longer see coding options is there a reason ?
I still see them so I have no idea...you’re going to have to ask the app developer.
Good luck with warranty coverage after coding...
Would this void warranties?
No
Doing this on a 2022 atlas cross sport vr6 and it does not connect to the car whatsoever with the veepeak.
Any ideas ???
Do you know how to activate high beam assist?
I believe the car scanner app has that feature under Assistance -> Enable High Beam Assistance”
@@Pancho4dummies have you tried it? Can you make tutorials?
Have you been able to code the CEM since this video?
Not familiar with CEM, do you mean the ECM?
FrankiZmo I meant the Central Electronics Module, but yes.
@@durimhasangjekaj2708 Gotcha, I still don't see the central electronics module listed in the App. Will need to do more follow up with the developer.
Will this void my warranty
No
Does this void your VW warranty?
It does not...the worst you could get is a fit from your dealer if you take it in for maintenance
I keep getting a “value rejected” notice when trying to make the same changes in this video. I also have an Atlas v6 SEL. any ideas?
If you have a 2021 model make sure the hood is open when coding. Its a security feature that VW added for the new models.
Will this void the warranty on a 2019 atlas.
In other words, would they find out I used a tool like this?
Also, anyone finding a setting on how to roll down the windows with the key fob?
The Atlas modules keep record of the coding instances so a dealer will know if it was coded and when it was coded. Some dealers are coder friendly and others are iffy. Havent heard of any case where warranty has been voided due to coding.
I noticed you installed an AFE cold air intake......did you notice a difference in power before you changed the coding?
No notable change in performance but slight improvement in throttle response. Engine sound is far better too.
Can the Car Scanner app be used to do frivolous things like windows down with key fob? And back up again?
The other thing that drives me crazy is the orientation of the Atlas image on the display - left to right vs top to bottom - like in the BMW. Is there a way to change the orientation of the display? In 360 cam mode? Thanks.
Yes you can code various modules...from keyfob to DRLs. AFAIK you cannot change the orientation of the Atlas image.
Appreciate the response! And the original video! Thank you sir! All the best!
What app is this??
www.carscanner.info
Thanks for the info! By the way, nice Autodromo watch ;)
If you're in Florida, can I come to your house and have you code it for me I'll pay you..?
If you're in Florida, can I come to your house and have you code it for me I'll pay you..?