Nice, for Z depth I go for 0.05 mm. I search with Z for the lowest point on the PCB to zero. An other way is autolevel. Very nice built, a lot of work and a nice video.
The not so good milling of the pcb outcome is not a bit problem. Its from the vibration of the bit due to the lack of sturdiness of cnc itself. The motor is too big for that gantry design. Those cheap Chinese v bits included in most Chinese 3018 are actually satisfactory for pcb milling with sturdy cnc machines.
Nice, for Z depth I go for 0.05 mm. I search with Z for the lowest point on the PCB to zero. An other way is autolevel. Very nice built, a lot of work and a nice video.
Highly depends on the copper weight :
1 oz = 0.0347 mm
2 oz = 0.0694 mm
When using a V bit (and thin traces), this becomes important.
Color scheme reminds me of the ant pcb mill love it
Thank you for your good training. Just work on the video editing techniques so that your video gets out of boring mode. Good luck🌹
Can you provide exactly which components are used to built this?
Very good👏👏
Where can i have the 3d printed part
Muy bueno, compartis los modelos?
😍😍
What motor/spindle are you using here and what rpm does it run at?
The not so good milling of the pcb outcome is not a bit problem. Its from the vibration of the bit due to the lack of sturdiness of cnc itself. The motor is too big for that gantry design. Those cheap Chinese v bits included in most Chinese 3018 are actually satisfactory for pcb milling with sturdy cnc machines.
Nice Machine, may I ask what software you use for making the Gcode , Thanks
FlatCAM 8.5
End mill name please
hey man can u please add links to the parts and stl files for making one of these ourselves
Yes will be useful
Is there a place to get stl files for the build?
sorry they were not perfect therefore I didn't save them
stl?
Stl plis
Can you provide drill bits detail please which one should i buy
Use V bits. spring loaded if you want to carve on solder-mask for etching.
Nice build , can |I have.Stl files please
Sir STL file Plzzzz 🙁
Sir price?
I spent about 130usd total.
The v-slot and dust combination is disastrous
just 3d print some fillers that they are flush: problem fixed
Compress air