Video není dostupné.
Omlouváme se.
WiFi + GSM alarm for home without connection fees with APP Smart Life easy to configure.Screen color
Vložit
- čas přidán 10. 12. 2020
- In this new video we want to show you how the alarm is based on the Smart Life APP. It is a very interesting system with WiFi connection through notifications in the APP and with a phone call if you also use a SIM card
We will show you how to do all the configuration with the TuyaSmart APP "Smart Life", as well as how to add motion detectors, door, RFID proximity cards and their connection with other products from the Smart Life APP
great video, would have been lost without it, thanks
thanks 4 comment
hDjeuueidhiehr
@zoominforbebwne wk energia enrvnrbejekw ejebmatica
Great video,thank you very much for the information
But I do have a question,I got one but when insert the SIM card it does not have a signal although it works with any cell phone
Do you have explanation for that issue?
Thanks for your time
Check SIM card has not PIN
Hi! great Video! Do you know how to get the accessories battery status? Or if its possible? Thanks!
If accesories have low baterie funtion on APP will see if its near to empty
Nice video. To charge the device via the USB port on the back? It's a bit uncomfortable I wouldn't want to force it. Thanks
Yes.. it's not very easy to connect
Morning thanks for all the information.
How can I reduce the volume on this RFID alarm
Sorry.. volumen cannt be adjust
I have some zigbee motion sensors for tuya. I would like to use this motion sensor in this home security device. Can I use it as a sensor with the same function as the 433Mhz sensor with Tuya's Smart link function?
Zigbee detectors (models we tested here czcams.com/video/M62WZtlDrTA/video.html) are conectted to a host wifi
@@zoominformatica Thank you so much,
Does the video host wifi have a Disarmed function or Away function in Device Mode?
Also, is it possible to set an alarm delay or an exit grace time of about 1 minute when the Zigbee detector is activated while the Device Mode is Away?
@@blackzoro1112 Yes.. host have away & home alarm
yes.. also can configure entry or exit delay
Thanks for the video, is there a way to turn off "alarm message propel" it's the one signalling when the alarm is activated or deactivated? Thanks!
Not sure about what message want to mean. You can adjust lenguage voices but iam not sure if can disconnect
As far as I know, you can precisely block notifications for a certain device in the APP.
not sure to reply@@stevenlean8822
Great help, this video. Can you tell me how to change the SMS/Text message language? It's chinese right now....
I think this text cannot be changed. We not checked SMS text. We will note it to check at futures video
Thanks for the great video ... how can I connect a normal telephone (landline) to do the alarm calls. Is it possible?
sorry.. this model cannot conect to landline. Only GSM & WiFi
@@zoominformatica Thank you for the reply
Is it possible to connect the system to other sensors that are supported by the Smart Life app
?
Of course.. one item interesting is outdoor siren
Hi, can the panel make an entry chime sound when the door is opened? What is the model number?
Yes. it allos detector like a chime sound. Model we sold as AZ047
How much is de power voltage on de siren oulet? Can i connect an other louder siren together with the siren in the set?
Output is 12v
Are the sensors from DIGOO DG-Hosa compatible? Many thanks
Sorry.. can't confirm it
Hi! Can I use these sensors with other automations inside smart life app? If door sensor 1 is open, turn on the lights?
if a door open not. If alarm trigger can turn on light
@@zoominformaticaThanks for reply! So, inside smart life app, I can't select a sensor alone to trigger a routine? It's a pity, cause then, I would have to have 2 door sensors in a door, one for the alarm and other to the automation?
@@IgorBomtempo Not sure to reply. Each detector can have a configuration diferent.
@@IgorBomtempo I'm with you. It's always a failure when the software limits your ability to automate. I originally thought the alarm panel would act as a hub presenting the attached sensors as devices.
I found another big problem= you can't trigger the armed alarm in a particular mode, only for ALERT mode is possible so if you have a wifi pir sensor you cant use the delayed mode to get time to dissarm. =(
I am using the alarm to monitor a sump for increased water levels. Can you recommend a solid state sensor that will work with the unit? I would like to try a wired one and a wifi one. The sump is external to our house and the atmosphere is therefore very humid.
I think detectors included not will work for this issue
How strange to say that. It came with a wired float switch which detects an increase in water level.
Hi, I’m trying to connect the Smart Life app but I’m unable to via Airlink or SoftAP. With Airlink it says ok but the countdown on the smart life app does not stop. Any ideas?
Check password is not too long(more 15/20ch) or some special char in password !"·%$$&%$^*¨Ç
Hi did you manage to sort it, Im having the same problem, Thanks
Thanks for the video. I have a problem when the alarm is triggered. In my system I configured a telephone number to receive only phone calls and inform the recipient with a pre recorded message. Well, the telephone call is regularly received but the message is not the one that has been pre-recorded by me but a message that allows the recipient to manage the alarm system "Press1 to arm , 2 to disarm, 3 to ear, 4 to talk". This message is the same that correctly I ear (the owner of the system) when I call the SIM card number inside the alarm system.
We will this feature pre record in futures videos.. but as far I remember this message it's only played when host call to you, not when you call to host
We will check
Thanks a lot for your quick reply. If there is an alarm I want to call the police and give them information and direction to my house. I will be awaiting for your next vodeos.
Hi , if alarm is arm and connect with my wi fi ,(I don't have a sim card) and i open the door contact, i recive in my mobile an alert?
Yes. You will receive a push notification
Can this sytem work with a newer gsm not on 2g network? Like 3g, 4g...
Cannot reply with security
Can you arm and disarm your tuya security system if you are 100 miles away.
Yes, you can control remotely
hi, how many wireless item could use in that, like is possible 2-3 camera + 2 door sensor + 4 fire sensor + siren + 2 security detector? tottally 10-12 of the, is possible?
Yess.. here can see more detailed support.tuya.com/en/help/_detail/K9q79msw3accz
Can you disarm the alarm with pincode when entered the house/office ?
Yes
Hi, I read in the manual that it is possible to activate the alarm by SMS with the password System. When I send an SMS in the format xxxx1 or xxxx2 (xxxx for the System password, 1 for Arm and 2 for Disarm), nothing happens on the alarm. Is this normal?
Hello. To arm send 1234#1 and 1234#2 to disarm
@@zoominformatica , Thank you for your prompt response. It works ! 👍
@@chrysaor94 Nice to heard it works
I prepare to purchase 2 systems, one for my condo the second for my cottage. Is it possible to monitor two systems with one phone application ?
Yes.. administrator (1st user) can share with others users on app
@@zoominformatica I asked if with one phone app possible to monitor two systems / locations ? ( Home and cottage )
@@bestcvb yess.. could be diferents host at diferents place and can be monitorired by same user
is it possible to have only the sensors on the door activated without the pir motion sensors being activated? so that when I sleep at home I only have the sensors on the doors activated. if so, how is it done?
Not sure to understand. I am not sure if want to use a home arm while for example you are inside home and want only some detector works. This alarm allow this feature
How Long Do the Batteries last in the Wireless Sensors.
Cannot reply with security. It can vary dependes on usage product (numbers detections, open door..) and quality batteries.
Goog batteries and a house where not live for sure can works several years
can you please confirm if those remote controls work on 433Mhz?
Yes. This model works 433Mhz-1527
@@zoominformatica thank you for confirming. And one more question: do they use a static or a rolling code? I purchased another Tuya Alarm from another manufacturer and the remote has static codes, which can easily be captured by someone sitting outside the house and then replayed to disarm the alarm.
@@zoltar99 This has fixed code. This another uses rolling code czcams.com/video/aKZmrdhb-IQ/video.html
@@zoominformatica thank you. Do you sell additional sensors separately? The default kit comes with only one door sensor and one motion sensor which would be ok for a small apartment, but not for a house.
@@zoltar99 yes.. we sell fhss rolling code and 433mhz-1527 fix code. Here can see them www.zoominformatica.com/comprar-c-(Accesorios-alarmas).php
Can the APP be connected to the Digoo DG-HAMA ?
Not sure. I suggest same app recommend factory
Hola que tanto alcanse tiene la alarma ha cuántos metros puedo poner los sensores?
Dependerá del número de paredes y grosor, pero normalmente suele ser hasta 15-25 metros
Is there a monthly bill for this alarm System?
No. No need periodic subscription. Only need bill for GSM Sim card if need host make a telephone call to you
Did you make a video whth a mobile phone?
Yes. You can see how to control host with app mobile
The printed sheets included are hard to read. Is ther a PDF version that might be easier to read?
In our website there is Spanish instructions
You also mention that there will be "future videos" (after 3 min 45s) could you provide links to these videos?
We received many questions that try to solve with videos, but someone not possible to make all videos customers ask, even we will try it
That’s fine, but why bother saying in your own video that there will be future videos?? It’s you that promised them!!
How can we connect wired zones? Not referred in the video neither in instruction manual
We only have this documentation at Spanish: Here can see it czcams.com/video/ybvfnQVFYfs/video.html
Can the burgler just press disarm on the central and then keep robing?
Yes. To avoid this situation host must be hidden inside house
@@zoominformatica lock the keypad
@@zoominformatica This is not proper alarm system, if anybody can disarm it?! It is not usefull if it is hidden inside house, it needs to be near entrance so you can arm/disarm it when you come/go.
@@mihazupanc6657 Noted on user manual tolds how block keyboard to not allow disarm directly
@@mihazupanc6657 you enter a password in the settings and then to use the password you just go into settings again and enable keypad lock and then you have to enter a password before you can disarm. Obviously you can still disarm from the app , SMS , RFID tags and the keyfob
Hi there! How to use wired zones?
We only have at Spanish lenguage on this video czcams.com/video/ybvfnQVFYfs/video.html
มีไฟล์คู่มือไหมคะ
No entiendo
I built a house and at the time didn’t have internet. The house alarm would turn on and off with the key chain, but when I try using the touch screen it asks for a password. Now that I have internet I am trying to connect it to my WiFi but I can’t do anything without that password. Is there a way to manufacture reset the alarm.
You should not have to connect to your wireless signal. If can access to keypad you can delete all configuration or configure to your hot spot
have you ever set the password?if not,then you can try 1234 or 8888.This is usually the original password.
Could you find out how to reset the alarm? I also don't have the password.
How can i add another member who can receive alerts?
Others users can register on APP, and access host that admin user should share with them
How do i set the sim card? Put it on, but doesnt assumes the card
Check SIM card doesnt have a password PIN
2:05 what is the type of this battery? it's a standard CR2032?
Its a 2450 3v
@@zoominformatica thanks :)
Does anyone know how to do that every time a door opens or closes even if you do not have the alarm connected, it alerts you?
May be detector configured in a 24hrs zone
if someone calls the sim card direct they have full control over the system without using any passwords also they can listen to your conversation without you knowing
No. Its necesary to use a password to enter in host
@@zoominformaticai rang sim and was able to listen remote without password how do you activate password for people calling to the sim
@@merlinflyer2190 did you sort this issue?
@@merlinflyer2190 ok if you have stored your number in the alarm when you ring you won't need a password. If you try and call from a number that you have not saved then it will instantly hang up.
@@CZcamsHero666 no so now don't use sim
Is there a trick to opening the sensor to change the batteries? I cant get them open.
No. there isnot any trick to open it.
@@zoominformatica ok I had to force it with a screwdriver and did some minor damage. If I change the battery does the system remember the sensor or do I have to reprogram the entire system?
@@AllTheNamesAreGone If change batteries not need to program again
I have the same alarm, except after changing my router password I just can't seem to pair the Alarm panel using the Smartlife app with the new password. I'm still on 2.4Ghz and have tried both airlink and softAP configurations both of which don't work. do I have to reset the alarm panel and loose all my detector settings which I'm hoping it doesn't come to.
Iam not sure what password changed. Try to open keyboard and follow steps to conect APP
I think you have to reset the wifi from the alarm first, then try a new connection like you did at the first time setup.
@@mikobirra yess .. could be good idea
@@zoominformatica I see from your video the blue light on the SOS is moving in a circle. On my alarm it is steady blue. How did you get the SOS to move in a circle. I feel if I can get my alarm SOS move in a circle it will be in paring mode and I can then add the Multifunction alarm to the Smartlife App. Thanks
@@CarlD-zl6pg I cannt reply with security about issue on your case leds not moves as see on video
How you can control the alarm from distance? If I am not home and she îs start and don t turn off... what can I do?
From APP can manage host
I would like to add wired sensor but are using 12 v
Can add outside host
how to initialize the system if you forgot the password?
Not sure what password want to mean. The master password in most case can see at this video czcams.com/video/Lt-O1dKPcfI/video.html
Is here any security password on the main screen?
Yes.. screen can be locked
How can I locked the screen? To only unlock with key..
Thanks..
Yess. its possible to do it.. On this spanish video can see how to do czcams.com/video/ciT6-FetvS0/video.html
How to mount the alarm to the wall?
I'm not sure about exactly question. Mount on wall is something very easy with wall mount included
Does anyone have problem that it freezing and stop working. Factory reset doesn't help, after few hours is freezing.
Not sure about problem tolds on host
it freeze to me as well, in particular it seems to freeze after connecting to wifi
Now SimCard only 4G and 5G. My alarm uses 2G. How to upgrade 2G into 4G?? Thanks
This feature cannot be change from a configuration.
Why my one does not generates call .massages only
Check international prefix and number on settingds
How to avail
Not understand
Hi i have same device but now it disconnected from smart life and not configuring again.
I cannot reply with security about what can be problem. Try to charge and configure again
Hello, I have an issue with connecting the device to Wi-Fi
Try following steps or give more details
Does it work with 5G
Host only works with 2.4Ghz WiFi. But on APP can be controlled by 3G,4G or 5G
@@zoominformatica Can we use 4G Sim Card to send SMS to my mobile??
@@jacksprat2200 SIM card is used to send SMS/gsm call to your phone
Other than remote key, door/window sensor ,PIR sensors, and wireless sensors what are the other components we can connect. ?
Can we add smart sockets?
How to configure GPRS?
Yess. system allow more detector. You can add also sockets on smart life (not at host) and create scenes to link them
Not necessary configure GPRS on this model
i too have this unit with me. when the home wifi is not available . this can be configured to work with inserted sim GPRS. secondly can you please share any aliexpress link for such sockets please
@@s.wickramaratne4084 Hello.. this Smart Life host can be controlled by SMS on APP when there is no WiFi
When I open the app protection center, is not there.
Not sure about problem tolds. Because host should works at show on this video
isnthere any new working app for android?
We know: Tuya Smart & Smart Life
This is PG-107 alarm version? my is PGST production and link to homeSecurity app but cant connect to tuya/smartlife :( What firmware version do you have?
Sorry.. cannot confirm factory for this model
Have you buyed it on Aliexpress?
@@MsNapster32 yes
@@MsNapster32 No. We buy directly on factory customized
Riscontrato problema ,va in allarme da solo senza che viene fatto scattare perché? Qualcuno ha riscontrato stesso problema?
Check the detector activated host to focus on it
i have connect with 46 door sensor with this device. Once i arm in night time doors are close and nobody open any door or window but alarm is coming each days from each sensor. Very bad product. If any one have solution please comment
Door sensor only will activate if both parts separates. Please check both parts near with door close and not vibration can move door
@@zoominformaticai did the all configuration part. firstly i install the sensor and then add in to the device.everytime door open and sensor add to the device.
Some days come zone 10 alarm then i was silent it other days come other zone.this is the problem
@@zoominformatica some door sensor 24 hours silent mode. system arm time alarm is coming .is this possible
@@hasunviraj4523 No. If really this sensor in this mode and activate alarm could be a problem on this detector. Try to replace
@@hasunviraj4523 Could be a problem on this sensor or in host
Those systems does not have anti-jamming capabilities. If someone uses a jammer they will not work. If you can confirm and prove that antijam feature is included then it's a nice product.
Yes, this model will not work with a jammer. If you want to protect can install a jammer detector wired to this host to take a notification if a jammer is near
Can you provide any link for jammer detector please? Thanks
@@sajeelanwar hello www.zoominformatica.com/alarma-para-casa-sin-cuotas-inteligente-gsm-wifi-rfid-fhss-teclado-az043.html with FHSS anti.jamming