Renko gets painted - last full week on the hardstand
Vložit
- čas přidán 2. 09. 2021
- In this video we get close to the end of this steel trawler restoration. I make the drawers and table for the back deck and then finally paint the whole boat after weeks of needle gunning and sanding. This is the last full week on the hardstand, only a few more days to go until launch!
For outboard repair information, checkout my website: outboard.dangarmarine.com/guide
If you are enjoying this channel, please consider making a donation to www.paypal.me/dangarstu or become a Patreon of Dangar Marine at / dangarmarine
T-shirts and other merchandise available at teespring.com/stores/dangar-m...
Common items used in these videos are available from my Amazon store at www.amazon.com/shop/dangarmarine
Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors. If you are in the US, be sure to check out their online store www.marineengine.com/
All music available at soundscloud.com/dangarstu - Zábava
I was shopping at a Cabela's store in Avon, Ohio, USA and spotted a man wearing a Dangar Marine T shirt. We chatted about how much we enjoyed the channel. :)
That's so nice to hear. I think I'm going to have to buy a t-shirt. Thanks
That's very cool. :)
That’s so cool!
That's great. Wish we had Cabelas here in Aus
I have been to that store many times in Avon
Prior to watching your videos, I had thought that owning a steel boat would be a lot of work. Glad to see it's so carefree and easy.
Hahahahaha so easy. Just a quick weld
Piece o'cake innit
Stu has had nothing to do but laze by the pool on his holiday
Hard work, and loads of money. Both of which continue for the life of the boat.
Kinda like a high maintenance wife. Not sayin your's is 😉.
Renko looks fantastic. Guess hard work does pay off.
Thanks mate, finally getting there!
@@DangarMarine,I think you were there when you got her mechanically sound, especially with the Detroit. Your just putting frosting on on her now, looks great!
@@Hoaxer51 She's gorgeous, but -- especially for a steel hull in salt water -- coatings aren't just frosting.
@@MargaretLeber, while I think what I said has some truth to it, what I said was tongue in cheek or an attempt at it.
10:18 - _"Ya know, Renko's actually very average length, for a 30-foot boat"_ lol! The banter here, is great! Cheers-
Great job fixing up Renko twice in the time it’s taking team Brupeg to not finish once.
I think it's a cultural difference, an Aussie just gets 'er done while a Kiwi has to dither about how to get 'er done. ;)
You do know Brupeg is 3 times the boat and they were doing major changes to her while Stu is just bringing Renko back to a seaworthy state?
@@jaquigreenlees hi friend cool dialogue, for us non down under I get Aussie, Kiwi ? Lol
@@albertomoniz9051 kiwi is someone from New Zealand ;)
@@albertomoniz9051 New Zealand = Kiwi.
You realise Stu was full time on his boat for the last couple of years and Jess is disabled and Dame still works a full time job… as well as building Brupeg
I have watched every one of your videos from day one. She looks perfect. What an incredible job. You are a true craftsman and engineer. 👍
Thanks mate!
Bottle openers with storage! Hahahhaha - love it!
I have dearly enjoyed watching you and Brupeg working side by side. Just mind boggling the amount of work both of you have accomplished. Hats off to you both. Renko is looking beautiful!!!!!!!
Thanks Dennis. I've really enjoyed being side by side too, sharing tools, sharing ideas lending eachother a hand from time to time. It has made things a lot more fun and really helped get things finished.
I love hard work - I could watch it all day!! Can’t wait to see it back on the water mate. Don’t sweat the video timing we still love you!
"It looks like a Cummins. Oh no it's just a starter for the Detroit." 🤣
What’s left of Dangar Stu!!! Perfect way to sum up how hard you’re all working. Renko is looking amazing and the thought and effort into all the mods from the bow roller for the winch to the new position of the gas bottle off the stern is amazing. I only hope that the original builder of Renko could see how well his original work has stood the test of time and appreciate all the time and effort you’ve put in to give Renko a wonderful new lease of life. So looking forward to seeing you on the water again. Enjoy a Coopers for me.
Thanks Scott, I sure would love to find out more about the original build of Renko.
Busy week for sure. Your the only one who can give me leg cramps, bumps on my head, and jar my back, while sitting in my easy chair. Watching you work makes me tired, I need a cold one now. You see what do us vewers?
I'm exhausted! All that hard work! Much better boat now. Thanks.
Renko looks great Stu. Congrats on a fantastic job. Can’t wait to see her in the water.
Thanks Kevin, I'm really looking forward to launch now too. Time to get floating again!
Looking great Stew! "What's left of" had me laughing but I know the feeling well. It's worth it though, Renko is really looking excellent and you've fixed a lot of stuff. Almost there! 👍👍👍
Next he's going to put a set of twin turbos on that Detroit to show his bud Brupeg how a steel boat you can water ski. Lmao
Hold my beer mate 🤘
Thanks, pretty tired at the moment but I'm sure I'll start to really enjoy the results after a rest.
My man... You are obviously busting your ass. Dont sweat getting videos out. We will all be here after you are done. Toss a couple of coopers down and appreciate what you have accomplished.
This episode reminded me of the line from "Behind Enemy Lines"....
"HOLY SH&T! WE'RE BEING PAINTED!!!!"
Renko is all dressed up and ready to go out , a job well done and done well Stu .
"Whats left of Stu!" Haha. Almost spat out my tea right at the beginning of the vid. So funny. What a great amount of work accomplished so quickly. Been great seeing all of you together helping each other. Thank you!
Thanks John, you're most welcome!
You are forgiven for missing last weeks video. Very nice on how she has come together. I saw you on brewpeg and just wow on the antifowling sanding, what an awful dirty job to do.
"Pretty Dang Spiffy!!!" Not sure where but It seems I have heard that before!!! CHEERS from Canada
The advantage of wet sanding your anti-foul is it makes your teeth colgate white.
First time ever!
Absolutely love how Renko is turning out. So envious of this project!
Thanks mate.
Sitting here watching all the work that "what's left of Stu" has done...... I am exhausted! think I will take a nap..... and it's only 7:30. Renko now looks like a luxury boat.
A real Yacht now!
Keep up the good work!
JIM
Amazing job, you have shown how important good friends are in life. She looks GREAT!!!
You have certainly cracked out the work during this haul out and Reno is taking shape nicely - and looking ‘spiffy’. Well done Stu.😀👍
You have transformed Renko now looking really smart!
I love watching these videos as it motivates me to keeping working on my 1990 19ft 4.3 v6 powered speed boat. Always something to do to keep it going, and it can get tedious when really I just want to use the boat with the family. Fortunately when I watch stu work on renko I think, nah it’s not actually that much really, and I get my arse down to the boat yard and fix whatever needs fixing that weekend. Good system. 😀
I really like the new color scheme. Renko looks great! A far cry from when you first got her.
6:03 FEKIN FINALLY!!!!!!!!!!!!!!!!!!!!
A boat with a relocated oil filter! Good to see SOME sanity from you Stu.
14:01 and the women all come running for that soot!
The worst boats I've seen for that are the inboard Mercruisers. Almost impossible to change without a relocation kit.
Renko is turning into a beauty. Thanks for all the videos of the transformation.
The number of people who are doing the same thing AND getting paid for it is absolutely amazing 👏 only wish I'd of tried it.
"Looks like a Cummins...o no its a starter for the Detroit" nice
You don’t wanna go home Stu it’s covid madness down there.. your in paradise where you are!
When I used to sail the river boats in the Netherlands some 45 years ago we used to tie the flag (in this case the company flag as the Dutch flag was at the stern) to a long broom stick an then tied the line below the flag and at the bottom end of the stick (we had screws in the stick to prevent slipping) then just hoist it all to the top and then the flag would actually be above the top of the mast. A bit of a trick to get it all right the first time you did it, but it worked quite well. Keep up the video's, they bring back memories of my childhood years(1 to 6) when my parents and us kids were living near Sydney with my best memories from our final years in Collaroy Plateau.
This HAS to be a labour of love-thé evolving beauty of Renko has certainly taken a lot of effort and ingenuity. Brupeg makes Renko look so small. Time to enjoy yourself.
Indeed, it sure has been more effort than I expected. Renko only looks small because it is. The Whittley Cruisemaster CR2800 is a trailer boat, and less than a foot shorter than Renko! Which makes me think I should get a trailer for it and make the new mast folding... ;)
You've come a long way with all what you've done on this little steel trawler, She looking Fantastic Stu. Absolutely, Fantastic!!!
Just admire the grey finish shows off the nice lines of Renko it now a handsome vessel
She looks fabulous. Such a transformation from the rusty boat you originally purchased.
Hi Stu, that dark grey hull colour has taken 10 years off the age-look of the boat. I love it! Greetings for the UK btw.
Wow...Renko's looking amazing!
Wow! You have done A LOT of work. I became exhausted sitting in my chair watching your video. Really looks great. Smooth sailing, sir.
I like the first part where you said hey there what's left of dango Stu here 😂
Renko looks great. What a project it has been to get to that result. Nice you could do it with such inspiring neighbors! 👍👍
Great to see all the hard work coming together Stu. She really looks the part now!
"Bottle openers with additional storage" are the best type of drawer.
Give yourself an uppercut for leaving out last week's video....Naa just kidding ,we all know how hard you have to work on this project. Anybody who welds without shoes has gotta be tough. Many thanks for all the time you put in to produce these videos..Hey youtube quality content on this channel..
“Basically a bottle opener with some storage” LOL
the mighty Renko is looking sharp! nice work on the hardstand.
She looks like a whole new boat! Well done sir.
200k subscribers just short of launch day Stu. Well done my friend 😎🍺
Thanks mate!
Adrian is a legend!
Holy cow! Renko is starting to approach "yachty"!
Wow...that's pretty sharp looking now.
I am always exhausted watching you work. God bless your efforts.
Excellent progress on Renko.
Love those bottle openers with additional storage😂
Reno is really looking ship shape. Very nice.
"What's left of Dangar Stu here"
I immediately looked to the hands and fingers to see if any were missing lol.. Don't scare me like that man
You missed an opportunity to post a video of paint drying! CZcams gold right there. 😁👍
She looks much, much nicer now. Well done!
You know at this point Stu, you could explain Renko in a nutshell to a layman as, " Well the hull is the same shape as when I picked her up.... more or less, but probably less" Haha.
I mean the wheelhouse isn't even the same size as it used to be realistically, she is brand new!
Your hard work is definitely about to reward you mate!
Bloody well done 🍻 and I hope you both enjoy the next leg of the journey up north with your beautiful boat!
Well deserved, we appreciate the effort you put in just to bring us along!
It looks fantastic Stu. good on you mate. don’t dirty him put Renton in a museum’
I've been watching your videos off & on since you started work on Renko. I love what you're doing and keep up the good work. I can't believe I hadn't subscribed as of yet. Done!
ahh the 6 months of wet rubbing boats at noakes brings back memories
Renko looks Horn. Love your work, keeps me sane during lock down.
You have the best full squat position of any presenter on CZcams, Stu-and when you can squat, work is so much easier. Very nice work!
LOL. It does make working down low much easier!
@@DangarMarine Agree completely. Most of my cohort can't flat-feet squat at all. It's something I do every day.
100% better looking now! Well done Stu. 🇨🇦
Renko looking sharp Stu. A lot of work but so worth while. Loved the coal miners out fit after doing anti fowling lol. You looked like me after a shift on the face cutting coal.
Boat looking good captain 👍🏾
Indeed, boats are fun, boats are great, everyone should really get a boat :D
G'day Stu I a miss over the months but I'm back subscribed and I have been watching the past videos she still looks and it will look very nice when you have finished I haven't been very well so I've got some catching up to do. I hope the girls are alright. Stay safe kind regards John
Thanks mate, hope you feel better soon.
Looking good Stu ! Great work ! 👍 👍
Was great to see Renko looking finished although I know that is a false concept. Great shots of Renko and Brupeg together. All of you should be super proud. Not just the material achievements of the boats but the entertainment and learning you give us too. One complaint. Wearing my new Renko tee shirt in Vassiliki in Greece. A guy stopped me and said that it showed her blue which is the wrong colour, as she is grey. I told him he was an idiot....
" Whats left of Danga Stu herer" lol...But I symphatise with you big time..,Cheers Stu ,great job...!
About time. I was getting withdrawal symptoms!
Looking flash Stu, well done
Man stu ol renko is a beaut mate. Lot of hard work in a little time. Looking forward to a complete run down soon hopefully
I’m not one to get overly excited…. But that paint job looks amazing!!! 👌🏽
Renko looks great 👍, good job.
very good color selection, very modern and makes the boat look modern
Great job. Brupeg's dingy has never looked so good :)
Wow its looking really great. Well done man.
Wow I love the battleship gray!!!! Really looks fantastic!
Really satisfying to watch from my sofa 🤣🤣🤣. Good one Stu 💪
Looking good! Cant wait to see the GBR! Its one of my bucket list diving destinations.
Congratulations Stu, that’s an enormous amount of work. Best of luck !
We call that sugar cane burn off Black Snow! We get it here around Tweed Heads!!
Beautiful!
Beautiful! Your best flat head screwdriver, is great! Cheers!
Looks amazing!
Looks great!
Wow fantastic!
Renko is looking very smart and sharp.
Looks so good!
Watched with my Dsquad shirt on. I miss the girls at the end of the videos. Have a good trip to the Great Barrier Reef.
Well done Stew looks great
looking great!!
Looks great.