Connect the car jack to the table, and you will be surprised by this idea !
Vložit
- čas přidán 22. 04. 2024
- Hi friend. I made a great video for you in which I used a car jack. I have turned it into a very useful mechanism that may be useful to you!
Friends, my name is Vanya! I am the author of the channel HandCraft.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy - Jak na to + styl
Hi, I hope you liked this mechanism) Rate from 1 to 10
Ten points 👍
I see it as a 10 !
Definitely a 10 from me
10
Very nice. 10
I'll give it a 10 Genius!
Thank you for such a high assessment! I am very glad that you liked it)
This content, is great work. Very worthwhile.
Wow, curiously, for at least 15 years I've been thinking about doing something similar for my use, not with wood, but i do more things with metal, but was never been able to figure out the way to do it, and now you've shown me how to do it.. thank you very much.. that's a super great idea..
It's been two weeks since you're coming so have you started?
That's very clever! You deserve 11 out of 10 for that!! To be honest with you, I think that if you mass produced that table, it would very likely sell! As you demonstrated, it is operable with a load on it. I would love something like this (a variation of your design) that is a storage frame/box that allows me to load fully laden box/frame onto a trailer (or van) without any lifting whatsoever.
I really liked the idea! Of such systems made on CZcams, this one is one of the best 👍 Continue on
Thought I was going to die of old age before I figured out what you were doing! I was impressed in the end!
Nice job I was surprised
Very cool work bench. I definitely give it a 10. Good job!
10 👍. Fun project to watch as well!
absolutely fantastic !
Great job, man👍
Wonderful addition!!! 10 ⭐ Rating!
I am very glad that you liked it! Thank you for such a high assessment👍
Very nice
Awesome idea. Its a 10.
Thank you sir for such a high assessment!
Great video. Clever engineering.
very good!
Genius! 10/10
Ok, fantástico trabajó maestro, gracias por compartirlo.👍🤓😜
Cool. I think I'll use that jack to create a scissor lifting table.
Thenk you man
I am giving it a 10/10 brilliant 👏 idea 😃
Geniale e semplice da realizzare: complimenti!!👍👍
It's a 10 for me. And I'm immediately impressed... you seem to have cut the shaft off at a nice 90 degrees. I can't cut or drill at 90 degrees even if my life depended on it.
Great idea and plan!
Awesome video and a 10 on the table!!! 👏👏👏
Brilliant....10. Excellent video work too.
I didn't see anything in the video that looked like the image that caught my attention. So yes, I was surprised.
Супер идея 👍
10/10......awesome idea
Bellissimo lavoro! come hai mostrato, col tuo meccanismo anche un bambino potrebbe spostare quel banco da lavoro
Really smart!! I would give it a 99/100
Not an idea I've seen before. Great job 10
Nice cart, Well thought out! a 10 for creativeness and usability :🙂
9
rolls near soil
price ?
Very unique and a very nice cart. I'm sure the kids enjoyed riding around on it.
10/10 cool project.
Of course a 10 !! Great job and a really useful idea ! 😊
What a great idea
10+ great work
That's an awesome table set up...I need one adjustable in height...18 inches of travel... can support and raise/ lower 1500 pounds... and is 12v powered ... and either end independent raise/lower from the other
10 could you post where you ordered the Jack from, I don’t think we have that kind in the US, thanks and great job and idea.
That's a standard Mercedes jack, go to any wreckers
Trailer tongue jack.
Amazing work, dude! That's just brilliant! 😃
Stay safe there with your family! 🖖😊
That’s awesome👍🏻👍🏻👍🏻👍🏻
Hi friend
Sweet!
Nice!🤩
Lowell
Brilliant execution. Put blue thread lock on the bolts or replace with longer bolts. In military aviation, a minimum of three threads showing after the nut was tightened was mandatory.
It's very nice, but couldn't you use a locking lever to do that?
Nice modification, but it's not really a feature of the jack if you change its structure so much.
Стол с вертикальным взлётом))
9👍👍👍👍👍
great idea! until last min i was like wtf is he building??? 😂👌
Très bien: 10
Nice video, but adding 2 rolling casters and 2 locking casters wouldve sufficed
Это можно сделать с помощью двух рычагов.Если посложнее-одним. И не портить домкрат.
An over center foot operated lift would be much simpler.
9.5 lol. It would have been better if it were a metal table! ( from a welder…lol).
It’s a great idea, this could very easily be incorporated on to a vice stand or movable welding table.
L’idée est bonne, mais trop compliqué et coûteux pour rien. Bravo quand même…
в поддержку канала 🤔
Solid 8!
Cool ❤
Cool.
Very ingenious idea but also very overly complicated for its use. There are much easier ways to accomplish this, i have a table that uses a simple pull lever to to do the same thing and is a much simpler process to build.
Хорошая идея для станков в мастерской
Если у вас валяется в ведре домкрат колëса, болты и гайки, фанера и клей. То да хорошая идея. А так это, чугунный мост.
@@shallowgrave2642 в столярной мастерской всегда не хватает места. Возможность перемещать станки очень хороша.
Me gustó mucho el sistema es muy original, pero no logre entender el mecanismo
Hmm you know they sell wheel casters that you step on an they lift then step on the small lever next to it an they fold back up , and they don't cost much at all that can do the same thing.... just saying.
залипательно 👌👌👌👌👍👍👍👍😅😅😅😅
😂😂😂 super vozidlo pro deti
10! That's a LADA jack, right?
😁👍
Yes, 10
👍👍👍👍👍🤜🤛
🙏👏👍💪
So ein Aufwand für ein Tisch mit Rollen, so kann man auch die Zeit vergeuden 🤦♂️
10
what it is balls size number??
Muita engenharia pra nada...
Photo on video cover has nothing to do with the video = 0
Execution of an idea = 8
Practicality of end product = 5
Materials used = 6 Questionable use of plywood for moving parts under stress
Cost of materials = 4? Dependent upon longevity of apparatus could be a 1
Video enticement to build one for self = 1
Good luck with your next idea.
Hello. Thank you for such a detailed assessment of my work. I will correct mistakes and get better)
@@hand_craft
Keep in mind that they weren't mistakes, they are all just learning opportunities. 🙂
What a monumental waste of time
Just a little bit of overengineering for a couple bloody wheels , good Lord 🤣🤣😂😂🤣🤣👎👎👎👎
9 minutes of your life, totally wasted.
Идея конечно фуфло, а вот домкрат жалко. На eBay его цена 120 бакс. стол столько не стоит.
Trailer jack and not a car jack right
I would like to see how you jack up a car with that jack
You know.if you hadn't shown me how to tighten screws I don't think I could have done it!
10
10
10
10