Thanks for the info. I recently acquired a Swatches card with Durant/LeBron/Kobe which is kind of a rare card and is quite thick. Now I know that they make thicker loaders I can use, thanks again
Exactly what I was looking for at 3:46. Just bought Bowman 2021 and got some autographs and some blue wave serial numbers. The first two I had to push down hard into the case. Probably ruined it. The other 2 I just left in the sleeve. So where do I buy the big cases?
I would say, it depends on the card. If there is no auto on it then I would recommend using a dry paper towel and lightly rubbing it to clean it. Wiping only down the card (not up and down). But I’m not exactly sure. Usually it does not matter if you touch it a little.
I think it's because when you try to pull the card out of the toploader, you might accidentally pull only the sleeve if the opening is at the bottom. Then the card is stuck naked in the toploader.
I don't get why none of my sleeved cards slide into top loaders as easily. I use Ultra Pro sleeves and top loaders and I have to use a bit of force to push the cards in.
I want to buy trading cards to resell. I'm still not sure how I can send them to the client without getting damaged on the way. I am thinking of buying a card on ebay to see how the seller sends them to me and get ideas but I would not know if the seller is making mistakes when sending me the card the way he is going to send it to me. But I worry if it is a card that has a high cost.
For that I would say, it's easy to send a card in the mail with a toploader, it's harder with a magnetic case. If you tape the top to seal the toploader then it will not fall out, if you put two base cards on top of the toploader (one each side) that will reduce the chances it bends, then if you put it in a bubble mailer (I would only ship like that when I sold) it should have no issues.
Just cut out two letter sized pieces of cardboard and tape the toploader to one of the pieces. Then put mailing tape in both directions around the cardboard and it's super safe. Have been doing this for all my sales and got a perfect rating on cardmarket
No I'm not a dummy for watching this video...lol...When I try inserting them into the 3"x4" hard plastic toploader it's sticking when I try inserting into the top loader with the soft plastic cover on the card and I do not want to just insert the card without the soft shell cover.
I would say that I have never experienced that problem, but try opening the toploader extra, by squeezing the sides a little, or maybe try cleaning out the toploader? im not exactly sure.
Flick the inside corner seams on your penny sleeves to make a slit people. Notice that little penny sleeve corner bump at beginning of video, congrats you now have zero chance of a 10 grade. Busting the inside seam a few centimeters down will make a corner nick impossible.
Thanks for the info. I recently acquired a Swatches card with Durant/LeBron/Kobe which is kind of a rare card and is quite thick. Now I know that they make thicker loaders I can use, thanks again
Perfect thank you for the info!!!
How to use a toploader - ASMR edition. (for some reason I found this video very relaxing to watch hahaha)
Haha that’s funny, I appreciate that!
good for new thanks from TAIWAN
Great video
Exactly what I was looking for at 3:46. Just bought Bowman 2021 and got some autographs and some blue wave serial numbers. The first two I had to push down hard into the case. Probably ruined it. The other 2 I just left in the sleeve. So where do I buy the big cases?
That was a great review... would you know how many PT does a marvel card need for the ultra pro one touch magnetic card holder?
legend!!!!
What about sleeves for thicker cards??
Have u tried putting 2 cards in separate sleeves, then in the same toploader 75pt or 100pt? Each card will help the other stay flat
that is a pretty good idea, I have not done that before.
Can I display card with sleeves only without toploader?
What's the best size for a standard pokémon card
I look at my topload on the side and I see it’s not perfectly straight is it normal
My toploader is kinda bending. Why or what can i do
Should/how do you clean a card if you accidentally touch the middle?
I would say, it depends on the card. If there is no auto on it then I would recommend using a dry paper towel and lightly rubbing it to clean it. Wiping only down the card (not up and down). But I’m not exactly sure. Usually it does not matter if you touch it a little.
What about the jumbo pokemon cards, those things are massive. btw somehow i have a top loader for a jumbo pokemon.
That is something I have not experienced. But interesting!
Is there a reason why nobody sleeves upside down and the top loads the right way up? I would have thought that gives extra protection?
I think it's because when you try to pull the card out of the toploader, you might accidentally pull only the sleeve if the opening is at the bottom. Then the card is stuck naked in the toploader.
I don't get why none of my sleeved cards slide into top loaders as easily. I use Ultra Pro sleeves and top loaders and I have to use a bit of force to push the cards in.
I have the same issue. I had to be very careful pushing the cards in.
I stretch the top loader out a little bit with a letter opener so that I don't have to force cards in. Works like a dream.
@@robadams2274 I found that BCW Premium work much better. No stretching required. Cards slide in with very little effort.
Literally just posted that above. My Bowman and Topps Chrome I basically had to shove down. Probably ruined it. I’m pissed.
@@nostalgiaman6816 I had the same issue with my topps chrome my optics and all my nfl cards had no issue but chrome had issues going in
I’m very mad. I bought 55pt top loaders for a 55pt card and didn’t fit then I buy 75pt toploaders for it and STILL doesn’t fit should I get 130pt?
That’s very upsetting. I would try 100 pt if your sure it’s smaller than 130
wow
I want to buy trading cards to resell. I'm still not sure how I can send them to the client without getting damaged on the way. I am thinking of buying a card on ebay to see how the seller sends them to me and get ideas but I would not know if the seller is making mistakes when sending me the card the way he is going to send it to me. But I worry if it is a card that has a high cost.
For that I would say, it's easy to send a card in the mail with a toploader, it's harder with a magnetic case. If you tape the top to seal the toploader then it will not fall out, if you put two base cards on top of the toploader (one each side) that will reduce the chances it bends, then if you put it in a bubble mailer (I would only ship like that when I sold) it should have no issues.
Just cut out two letter sized pieces of cardboard and tape the toploader to one of the pieces. Then put mailing tape in both directions around the cardboard and it's super safe. Have been doing this for all my sales and got a perfect rating on cardmarket
@Reply to me you gay can’t no homo not in a top loader.
Damn it, I just bought a 130 pt top loaders for my Pokémon cards 😢
that is unfortunate, but you can just put a few in the same toploader if its mostly for storage its actually more efficient.
@@packerscard19 oh i didn’t even think about that thx mate
No I'm not a dummy for watching this video...lol...When I try inserting them into the 3"x4" hard plastic toploader it's sticking when I try inserting into the top loader with the soft plastic cover on the card and I do not want to just insert the card without the soft shell cover.
I would say that I have never experienced that problem, but try opening the toploader extra, by squeezing the sides a little, or maybe try cleaning out the toploader? im not exactly sure.
Sounds like the card your trying to put in is too thick for the toploader, get a thicker pt toploader
Maybe your hands are moist or sweaty. The penny sleeve wont slide down and can get stuck on the top when that happens
Great info but use a post it to get sleeve card out of protective case easily without pulling or ruining the card your welcome
Great idea
Or just tap it on the ground
Flick the inside corner seams on your penny sleeves to make a slit people. Notice that little penny sleeve corner bump at beginning of video, congrats you now have zero chance of a 10 grade. Busting the inside seam a few centimeters down will make a corner nick impossible.
What's the best size for a standard pokémon card
I would imagine 30pt
@@packerscard19 20 pt