How to: Retrofit CCC iDrive into your E9X BMW
Vložit
- čas přidán 24. 08. 2024
- Today, we tackle retrofitting the iDrive from my 2008 335i into my 2006 E91 wagon! This means installing a new dashboard, wiring in the display, radio, and iDrive controller knob, and then coding the vehicle, all of which I show you how I did in this video! I hope this helps you retrofit your E90 or E92 at home, and if you need more info, I'll put a link to a forum post below that really helped me out as well:
Forum DIY by voucher76: www.e90post.co...
Thanks for watching! Don't forget to check out The Bimmer Barn store to grab some merchandise, and get exclusive access to EXTRA content through our Patreon! :)
thebimmerbarn.com
/ thebimmerbarn
Some intense interior guts in this video! Great job Chris, really impressive how much knowledge and skill you have. It really comes across in your videos. I’m curious if you have any rattles or new rattles after all the disassembling and reassembling.
Lmao why would you wish such things upon me 😭🤣
I love the Bimmer Barn because every video is a Banger 💥
Really nice job and detailed tutorial. I’ve just learned not to take this task in as I’m not really confident with electrical work lol. I do have a donor car but don’t really want to do this job 😂😂😂. Thanks for saving me countless hours!
One of the best retrofit out there. Great 👍🏻
Very nice job Chris. A lot of work but 100% worth it. And for me, a very interesting dash take apart! That's because I was an e36 guy for many years. Thanks for sharing and have a great day. Dutch regards, Nico.
voltage regulator
but check if the brushes damaged the rotating coil if yes you will have to A get a new voltage regulator B a new rotating coper coil or C a new alternator
I just want to know how I tell my car that I swapped the M-ASK with CCC and disable hi fi add basic audio and add pdc… and to the other car the same
Did you ever complete the retrofit is so how is it going ?
What about usingvthe logic 7 amp?
you should retrofit the logic 7 speaker
I would love to see the Logic 7 retrofit as well. Where can I get ncs Expert??
Did your nav worked?
Nice work.
I prefer my clean straight dashboard. But still a great video.
What fuse No. was the idrive controller on? Thanks
Hello Chris I am Antonio from Spain thanks to your video I have decided to change my dashboard in my car Could you give me some way to communicate because I have some questions?
My only comment would be don’t use those taps. Do a thru wire splice and solder and tape. You can also get fabric tap for wrapping at Walmart or autozone.
Hey what's up can u do the coding remotely
Can it really be this "simple?" Lol I have a 2016 f48 and want to upgrade it to the connected drive services since 3g was discontinued but wondering if it really is just a change of the com box or what, as there is a 2019 at the junk yard that still has the parts and I'm wanting to go grab the parts
And love the license plate! Can only guess
This looks like a ton of work how long did it take?
8-10 hours for this install, as you see I was able to cheat a little since both cars were already torn apart.
What system did you use to programm the radio and such for the car...? Im about to be doing this to a 2008 e92 using my car as a donor and wanna know how to do the cod8ng myself
I have a video on coding my E90 and E92 cars, you download the tools from a website called Bimmergeeks and make the changes yourself! Takes a bit of reading and learning, but you can also just contact someone who does remote BMW coding and they'll do it for you. Hope that helps!
I swear you read my brain... I was just looking into this because I found a CCC car for my swap.
DO IT 😎
Maybe you should putted CIC iDrive system?
czcams.com/video/AhwvlACXag8/video.html
seems like they don’t have any CIC parts on hand
Xlnt work matey
First!
Too much effort and you end up with useless outdated CCC, which probably fail soon. For non-idrive cars is better to fit an Android headunit with all modern features (carplay/android auto).