New Filters Solve PULSING BLOCKAGE Light Issue with the Dyson Cyclone V10
Vložit
- čas přidán 28. 08. 2024
- Check out my follow-up video! The issue MAY BE YOUR BATTERY! • New Battery Solves PUL... .
Use my Amazon Affiliate link here to get THREE after-market filters that work for less than the cost of one OEM filter: amzn.to/3BGouHf .
(As an Amazon Associate I earn from qualifying purchases).
Singularis libertas super omnia.
Live Free and Die Free.
Dyson is horrible. Ours started early screwing up. Never again
I feel like they did the ol' bait and switch. I had a corded one when they first came on scene and it lasted forever. Ex got it in the divorce. Dyson stopped making corded and went to this battery-only bullshit, riding on the good rep they had. I bought into it and it's trash. Even awhile after the new filters it started acting up again. Tried a new battery. Worked for a bit, then back to shit. Got a new actual Dyson OEM battery and the same thing happened. They're like cars and lightbulbs now, with their engineered failure to make you buy another; "It's not a flaw, it's a feature."
I agree - never again.
This vacuum works great, as long as you don't use it to vacuum up dust!
True 😂
Two months into using this Dyson I’m having the same issues 😮
Thank you. Video from Dyson that I viewed did not mention that filter. Cleaned it with a brush and it works!
thank you for this video, the only one on youtube regarding pulsing blockage that solved my problem, once again thanks a lot.
Thank you from Dublin Ireland 🇮🇪🙂 Set of 3 filters on the way from Amazon.
Great! I just got the inexpensive filters from Amazon, put one in - et voila! - not only fixed but, good as new. Thank you for making this video.
@@E_from_KS Thanks for the follow up. I will keep an eye out for your review in case mine goes out again.
I just replaced my V7 with a V10, which was on special. I wanted the HEPA filtration. So far, it’s great, although the power head is more suitable to cut pile and not loop carpet which I have. Vacuum Facts here in CZcams has some good advice on these cleaners by Dyson. The UK guy who runs it for example emphatically states that one should not really clean the inside of the V10’s bin (or further into the machine) as the dust acts as a lubricant so to speak for the bin mechanism. The only three things one need do is empty the bin (its contents not having exceeded the max line), check the wand and power head for clearance, and wash the filter.
I can confirm, that if you still think you've done everything and your dyson should be working it most likely IS the filter. I happen to have two in ny possession and when one filter went bad but I did everything I could to clean and fox it the only thing that worked was switching it with the other filter.
@@E_from_KShow do u change the battery
Thank you my friend pulsing issue was in fact the filter, great video, clear and to the point
Glad to hear it. I hope you have better luck than I have though. This video is older, but after awhile even replacing the filters doesn't seem to work. I think Dyson designs planned failure into their products... I finally just gave up on Dyson and bought a corded Bissell for a fraction of the cost. The inconvenience of a cord is much less than the frustration of shortening battery life and constant filter and clogging issues.
I fix my filter. I washed at washing machine and later I up it into tumbler dryer. My vacuum cleaner is working as normal 😊
Oh that's outstanding. I'm probably going to try that when ours starts acting up again too instead of spending more money. Thank you!
Amazon gets a cut, esp for brands that have a store - hence the higher price. Thanks for this video, I did exactly the same, did a thorough cleaning and then the pulsing started on all settings (low/med/high) - ordering a replacement on Amazon.
Thanks for your video, I finally find out how to resolve this issue, my wife has complained it for few weeks lol Thank you again.
What is the solution ?
Thanks so much Eric.I had the same problem,and after replacin' the filter...now it works again😉Have a nice Sunday
Honestly, this is what I did to solve this issue: First, on high heat and speed of a blow dryer, blow on the filter until you notice any of the wetness gone. Then, on a cool shot setting and high speed of the blow dyer, blow into the filter if the vacuum a vouple times until the light flashes off. It took me an hour, but it was worth it!
Thank you so much man, this is exactly what fixed mine
I've cleaned my filter a few times with success. Last rinse & dry didn't help. Light stayed on. I decided to try one more thing before buying replacement filter(s).
I safely used a compressed air nozzle and blew both elements of the filter in reverse of operating airflow. I vacuumed from full battery to stop/discharged and filter light is still off. 🙂
That's outstanding. Next time we're having suction issues we'll try that.
@@E_from_KS I really think that the culprit of the stoppage with filter light is the pleated portion of the filter. The exposed purple part cleaning is obviously straight forward. You can see the difference. Hardly so with the pleats. I think some of the purple filter residue may even get deposited in the pleated filter when cleaning, possibly shooting right into one's foot.
I don't doubt that; I can see that happening.
I had the same issue on my v10. Had the same original Dyson filter and vacuum for approximately 5 years. I soaked the original filter in a bucket with hot water and simply green for about 3 hours. Used shop compress air and allowed the filter to dry for 24 hours. Vacuum operational check good.
Super helpful video. Thank you.
I had the same problem. I used a needle to open al those little holes in the filter cloth. And quess what, it works! 🙂
So you made it so the filter no longer filters?
Thanks for this mate. Having this issue currently.
Thanks for the video! Thanks for as well updating your affiliate link; I clicked on it and it linked to a 3 pack of aftermarket filters for $25! Cool!
This was very helpful! Hopefully, this is the issue. :)
Thank you for going to the trouble. very helpful
mine started doing that in less than a month
Im here as mine as starting doing it after a month too 😢
Seems to me like engineered failure on Dyson's part. Can't keep making money off a problem if you actually solve the problem. Gotta milk it. 😠
(Sorry the delayed response. Thank you for watching and commenting though)!
Mine has the same issue. Additionally, I noticed that it only sounds like work in the lower levels other than boost, but the suction is very weak. It can barely pick up nothing
Thanks for that Eric. Very helpful.
Thanks for info & link, this is
helpful ! From San Francisco
@@E_from_KS Hi Eric, thanks for your reply. I had ordered the filter found through Walmart $10 - fits fine, but dyson air filter light is still pulsating. So I ordered directly from dyson (per phone number listed on my vacuum filter 4x more expensive at $40) and it surprisingly did not fit in as easily into the vacuum. In fact, dyson filter's fit was more like the amazon filter's fit you mentioned that did not quite fit in right away and had to push it in with more effort.
i bought my dyson v10 is 2021. Do you think it's the battery? If so, please provide link to how to do battery replacement. I guess for that, it would have to be ordered directly from dyson huh?
Stupid me buying Dyson, so expensive and not working after 1 year, NEVER buy DYSON anymore!
They don't make em like they used to, that's for sure! We have a really old corded one that still runs great.
Absolute Junk, same happens with ours. Worst hoover ever
$23 on Amazon for three. $5 for three on Aliexpress. $30 for one from Dyson.
Right? I haven't braved anything from AliExpress yet.
@@E_from_KSHas effectively the same protection as ebay. Was the wild west (east?) 10 year's ago,. but fully mainstream now.
Good to know, thank you!
Obviolent Produktion.... 😮💨Ty for helping)
Thanks dude good job
The filter is "washable" you run it under warm water for 5 mins, use a washing up brush to loosen the dust and that's it, your obviously not cleaning all of the dirt out especially deep down inside, it basically lasts forever as long as you keep it clean....
Using a degreaser as well helps to break down the oils clogging up the filter as well. I like to soak in a mild solution of bleach and water after for 10 min to sanitize/deodor. Cheers
I have had this problem ever since I bought my Dyson V 10 animal 5 years ago. I tried everything. Even professional service.
When on max, it's till makes that intermittent noise! I am desperate and thinking of just throwing it away. Dyson sucks, but badly!
@Eric from KS not worth the extra expense. Better buy a cheaper one & throw out after 3 years
I have a v10 with pulsing issue and have 3 filters which we switch out regularly so that we always have a clean & dry one. STILL it pulses. Have cleaned out the inside. Have used different batteries, it still pulses. I'm over it. Starting warranty process tomorrow and will request a different model for replacement. Not doing a v10 or v11 as I read they both have these issues.
Same here. Three filters, one always clean and dry. Now at this point, it won't stop pulsing anyway. All is clean, even the body. So frustrating.
Could be you need a new battery
Just arrived to this discussion , have the spare filters , clean it all regularly. But still pulsing , took it into our garage asked my husband to use his airline to blast it all with air I thought it was as clean as it could be , you would not believe the dust that came out now it works as well as it did brand new.
I just bought mines 4 months ago and I'm having the same problem already...smh
@@E_from_KS Exactly it makes perfect sense. They gotta keep you spending money some kind of way. Can't make these gadgets too efficient, but I was still expecting a longer filter life.
@@E_from_KS Oh wow please don't tell me that. Yeh you should probably do another update video. I just ordered the ones you referenced from Amazon. They should be here Thursday.
@@E_from_KS I'm still waiting on my filters from Amazon. All of a sudden the vaccum came back on and working perfectly fine. I need to look further to see what's going on. Either the filter wasn't completely dry or a clog somewhere has been miraculously removed. This vacuum is acting weird...smh
@@E_from_KS The filter is "washable" you run it under warm water for 5 mins, use a washing up brush to loosen the dust and that's it, your obviously not cleaning all of the dirt out especially deep down inside, it basically lasts forever as long as you keep it clean....
It worked great for the first year then I replaced the filter under warranty when this started. However I have it on medium and it’s pulsing and I’ve cleaned everywhere. Wtf
Yeah this one worked great for several years for us. However, after awhile even replacing the filters didn't seem to work. I think Dyson designs planned failure into their products. I even replaced the battery with an aftermarket AND THEN again with an OEM Dyson battery... and it still kept failing. I finally just gave up on Dyson and bought a corded Bissell for a fraction of the cost. The inconvenience of a cord is much less than the frustration of shortening battery life and constant filter and clogging issues. I remember when Dyson announced they'd no longer be making corded vacuums; I knew that was the beginning of the end for them with me.
Any updates?
I have a Siberian Husky and his hair gets caught in mine and clogs it every single time I use it.
Perché non in italiano?
my is also sucks
This is the second one of these overpriced pieces of plastic throw away junk we’ve purchased. What a crock!
Do you mean the vacuum?
So im going to have to buy a new filter every 2 months? Ridiculousl
It's kinda obnoxious ngl. Maybe have two on hand - wash one out and let it dry while the other is in use🤷♂️. Wish I knew of a better solution. I have a dog that sheds non-stop (which is why we bought a cordless vac)... it's a pain.
Terrible machine. Would never recommend any Dyson. Problems with filter after few months, very user unfriendly.
Worse vacuum ever made
Have the Dyson cordless V10 . Dyson told me battery is gone, they sold me new battery, $76.00.
Machine still pulsates on all 3 settings. Don’t want to spend anymore $$$, even on filters.
Dyson Is terrible! Then they tried selling me a new machine w/ 20% discount, the phone rep in Bogota, Columbia (2 hrs waste of time). Told her come to USA, USA borders still wide open for All Illegal Aliens.
Filters all cleaned, don’t want spend on new filters. Getting refund back on new battery and trashing the 4 yr old machine.
F…….. this crap !!!!😮😮
Anche il dyson di mia nonna si è intasato
Literally had the same issue.
@@E_from_KS I changed the filter and it did start working, it does feel like the suction isnt as strong, I will update this comment if I do end up changing the battery.
@@E_from_KS so a bit weird, even since I replace the filter the hoover started working a little bit with less suction, now I noticed the filter light is on constantly but the hoover still works I changed the filter back to the old one and the hoover STILL works?? but the filter white light is on constantly.. Ill port back once things change..