Have some friends hit 2x4 on the correct pistons that are frozen and would be traveling downward while you are rotating with breaker bar. Put rhat 383 on there!
And a 400 crankshaft. This increases the stroke of the engine from the stock 3.48” to 3.75”. That’s what makes it a stroker motor. You can also make a stroker with aftermarket parts that don’t use 400 parts.
Don't use atf. Its far too thick to get in between a seized cylinder. You gotta use Liquid Wrench
Have some friends hit 2x4 on the correct pistons that are frozen and would be traveling downward while you are rotating with breaker bar. Put rhat 383 on there!
Thanks for the suggestion. I’ll try that.
So a 383 is just a 350 with a 400 flex plate and a 400 balancer?
And a 400 crankshaft. This increases the stroke of the engine from the stock 3.48” to 3.75”. That’s what makes it a stroker motor. You can also make a stroker with aftermarket parts that don’t use 400 parts.