I made my Nerf gun a bit too strong...
Vložit
- čas přidán 23. 10. 2023
- Channel members get early access and video shoutouts: / @mattie_y
Music by / @officialphilman
Vivaldi's Winter: • Winter - Vivaldi [COPY...
10 AM and 2 PM from Lud and Schlatt Crossing: • Lud and Schlatt Crossi... - Věda a technologie
nothing can quite describe the genuine panic i felt when i watched you actually turn on that dryer.
it freaked me out when i filmed it
@@mattie_ywhat were you thinking!?
then again that gag quenched some primal urge inside me to see a nurf gun in a dryer? I have no clue but it quenched something
its the quenchiest
@@mattie_yDRINK CACTUS JUICE
@@cosmicsnacks1191no
Goes from harmless nerf gun to painful nerf gun in about 10 seconds, love it
hehe 269 likes
I just love that unscrewing equipment is becoming a running gag. Also, I was expecting sabots at the end, but a 3d printed dart also works.
you’ll never see me use a screwdriver
@@mattie_y Why would you? Clearly what you're doing works!
a sabot would be sick to see, might not work at this scale, but a subcalibre dart might go a long way
As a nerf and firearms enthusiast, I thought of tapping gas out like a real rifle when I heard about the dart bursting.
If your theory is correct, by drilling a hole near the end of the tube, excess "gas" will be tapped out and you can use it to load another dart /j
For those wondering, that last bit was for real rifles. But in this case, I suppose just having a tapered hole near the end of the barrel can possibly remove excess air.
Matt, you should really try this and put it back into the shell and do cosmetic mods and make it cooler! Although this was cool enough.
Seeing your streak of pressured air blasters, what about using the tapped gas into a extra gas chamber, then using the extra air, why not make a masterkey? Im no engineer but using my logic, it is possible to do so.
Also, I almost had an aneurysm seeing you put the blaster into a dryer- I should do that too XD
Maybe a curved end like a blunderbuss so that the air escape isn't as harsh?
I was thinking the same thing. drill some holes in the long barrel, then stick a "muzzle break" over the real muzzle break to make it look good
I think the issue is that the dart bursts before its hardly even moved, the air slams into the dart and bursts it before it reaches any real speed. Maybe isntead he could either use some form of packing material/wadding to absorb it, or use harder darts. the longer barrel was a good idea but maybe not long enough.
Maybe you can redirect the air to push back a piston that can do something in a similar fashion to an AK
@@tovarisch3490 Thats the inspiration haha
The commitment to the unscrew dryer is amazing
I thought you might go with a few less pumps to fix the bursting issue. Then I remembered which channel I was watching.
lmao
I love that you also show what goes slightly wrong and how you overcome it! We need more people like you on this platform❤
He modified a nerf gun just to save his channel members, what a guy
This was my favorite blaster as a kid, traded a bunch of plastic lightsabers for one! Something that you might know already, but could be useful if you don't, is that this one came with special high density foam darts with solid plastic inserts as reinforcement. Your final 3d printed dart design is not far off how the original darts worked! If you wanna look into it more, they were called "Buzz Bee Extreme Darts" and the stock blaster can do 3-6" groupings at 50-60 feet with them!
wowee!
I love the idea of a Nerf war (with like jolts) and some guy comes up with a long thin tube, ready to wreck people from a distance.
toob
To be fair, in the hobby a lotta people used to use exactly that back in the day. Long, thin, powerful tubes may not be the prettiest, but they can be darn effective!
*"IT ISNT FUNNY ANYMORE, STOP WAKING ME UP!"*
*"BUT BABE, MATT YUAN JUST UPLOADED!"*
Matt’s disassembly methods are really efficient
Your videos always manage to be engaging, informative, funny and well produced. Surprised you haven't been at this much longer with quality like this.
Whew! I was worried for a minute 😅
Another goated Matt video, lets GOOO
I am just a little Boy from germany and i dont matter to someone Like you, but i wannat to Say thank you for These amazing videos! (Thank you?)
you are welcome!
PS: I‘ve always Wanted to build something Crazy Like this, because i am an Hobby-Engineer
And i did it once with a Nerf Stryfe. It didn‘t work. Can you maybee build a Nerf shotgun off a Insectizide sprayer? Ist’s my biggest Dream to do this myself and i Really want to se it come Alive with your channel.
How has your channel not become viral yet!?
remember to smash that like button
I literally had a panic attack when you put it in the dyer and it fell apart
love a good bit of vivaldi whilst wathcing a nerf video at 10 30 pm
🎻🎻🎻
If you were my roommate, you would've waited until 2:00 AM to film the dryer unscrew process. That was so loud! Great video, keep it up.
THE LEGEND HAS POSTED EVERYTHING ELSE DOES NOT MATTER(except taxes dont commit tax evasion)
tax evasion bad
taxes can wait
@@mattie_ytax evasion good, don’t lie to your fans
matt deserves more views
Love the commitment man. Keep up the good work!
I have no complaints that the algorithm recommended me this video
Snipers a good job mate 👍
Professionals have standards
you could’ve gave it a even longer barrel my man, that would’ve made the muzzle velocity higher
Nice to see somebody else running that sniper the same way.
Absolutely love the content bro, keep going!
Awesome!!! Dude, I love the videos!!!!
4:58 Really wasn't expecting it to make that noise
I remember seen thebackyardScientist have the same issue with the broken darts, and they put earplugs so the air woudnt go inside them and blow them.
I like how you try to tell a story in your videos and make them fun. You're doing well. Keep improving and learning. Don't stay the same.
To fix this problem you need a 1 inch long piece of 3/8 pex in a brass barrel and thats it. Ive tested this with this gun and its about 215 fps. 3/8 pex is also perfect for a anti suction spacer for most applications.
My boy, let me start by saying I watch a lot of CZcams. But sweet heavens do I love your content SO much man. Absolute gem of a channel you have. I’m forever in your debt and I eagerly await every upload. An unsung legend you are ❤️
tyvm!
Now you have an effective defense against haters
What if for the 3d printed darts you increase the barrel length or increase the amount of compressed air that it could hold cause I think that it might increase the accuracy
The dryer scene lol great stuff 👌
I think you could glue a reinforced tube inside the dart so its what takes all the pressure and not the soft foam body, also adds a bit of mass to make it go further.
I just wanna say before I get further into the video, that buzz bee hunter was da bomb, like, I loved that thing and it could shoot so damn hard, had a bipod and a scope, loved it as much as I did the pump action drum one with the shells
That thing at the end is basically an assassins weapon, all it needs is poison on the tip of the darts
If you put a little bit of rolled up packing tape on the inside of the barrel of the foam dart, it'll prevent it from exploding
Holes near the end of the pipe will let air out without the dart taking the pressure all at once. Though it is possible it is destroying the dart in the middle of the barrel.
The idea of needing a muzzle break in nerf is scary. Wonder if a suppressor would work.
@@dogdog357haha, I don’t know about a suppressor. Though, in the modded nerf/custom nerf scene there are barrel attachments that add rifling for increased accuracy in springers.
@chilledburrito Well I know scars are a thing. But I'm curious if adding a suppressor would 1. Help reduce the amount of air escaping the barrel through the dart and 2. Make the blaster quieter due to less air escaping as fast
@@dogdog357 1: It’s possible, I’d imagine it’s dependent on various factors that I don’t fully understand as I only really dabble in nerf, at least the physics part.
but if the goal is to stop the dart from splitting, I’d check the barrel for extrusions first, and if there’s no problem there, I’d try a dart with less friction or firmer foam, if none of those work, putting some tape around the dart should stop the splitting, and the 3D printed projectile Matt made is an interesting way of fixing the problem LOL
2: maybe, I’m definitely not an expert on this specifically. I know for certain in a standard springer setup, the sound produced by the air is usually undermined by the plunger, and theres no point trying to put a suppressor on a fly wheeler.
But since the setup Matt made, consisting of pretty much a valve and an air tank, it, itself should produce very little noise as you’d expect, and there are suppressors in Airsoft that can dampen the noise of the air exiting the barrel using a design very similar to an actual suppressor. It would probably only dampen it a tiny bit, it definitely wouldn’t be as drastic of a change as a real suppressor.
You’d probably get better information from chatGPT than me to be honest LOL
Superglue darts to harden them up also maybe add & glue a thumbtack to front of dart to increase dart weight.
More mass equals more inertia.
The pain of hearing the noise of a nerf blaster in a washing machine. Nice modifying!
Every day is a good day when Matt posts
If you could add rifling to the barrel it'd be much more accurate. Smooth bores are well know for being inaccurate.
You can make the darts stronger by wrapping them in a layer or 2 of packing tape and trimming off the excess, you might need a wider inner diameter on your barrel though
This is just wholesome!
aw thanks!
At this point you could cook the blaster to unscrew it
good idea
1:31 “Disassembled The Blaster modder Way”
A nerf sniper, if I were to squint, I would see the laser sniper from Star wars Jedi knight games.
I had a LOT of success with an Airtech 3000 and using brass barrels, plugged pump and removed air restrictor. 6 shots, auto rotate, a WALLOP of power.
I also used Frost king foam to make my own darts, so they couldn't explode. Old ones would still have their heads ripped off, but yeah. Would love to see you tackle that blaster
i do want a at3k at some point
well do remember, power does not = accuracy
maybe this is why my friend was allowed to bring his nerf gun through airport security but not back
i love these videos, they remind me of allen pan's older videos
allen pan went back in time and im him
i knew he would be the one to invent the time machine@@mattie_y
Could you design some Rifling into the 3D printed nerf? Something to induce spin
Make a scar barrel or even a slotted scar barrel, this allows the excess air to escape, fishing line scar barrel.
I tride a tank mod with one of these years ago, it worked, but over powered and split darts, fluted scar fixed that.
"Look a safety restriction! With this knife we..."
You know your nerf gun is strong when you can hear the bullet whizzing by.
nnnnnnnneeeeEEW
Being a nerf hobbyist, the moment you said foam darts won’t cut it and made plastic bullets… my giggles erupted, my heart sank and my grin widened out of control
I always love your videos ❤
As soon as I heard four seasons playing I immediately got guts and blackpowder ptsd💀
You should try adding rifling with a screwdriver
Now take this to a game.
He just needed a muzzle brake
Making a dart in the general shape as a mortar will most likely give you much more accurate shots also what model of Nerf gun is that so I can find where to get one
I like your fun disassembly methods, too bad they don't actually work. (although there are some machines which can automatically remove screws)
drill holes like 2 cm before the barrel ends so the pressure exits through them
You need gas port like on gas-operated firearm. Just drill some holes into the barrel about 1-1.5 lengths of the dart before exit - the gas will dissipate and the barrel will still be squeezing the dart to keep it intact :D
I want someone to make a fully metal "nerf" gun, like a bolt action rifle but if fires foam darts.
Your an epic nerf tuber reminds me of the og days of nerf modding
A straw inside a nerf darts inside can prevent explosions
i think the darts broke because the ruber tip was stuck on the aluminum barrel causing the tip to move slower than the foam crushing the dart
i am so happy this guys growth recently i remember when he had only 400 subs
😄
hi man how are you@@mattie_y
not bad not bad
good@@mattie_y
I made a nerf gun a few years ago using a long metal pipe and a pump with a pressure gauge and valve, it broke the darts on impact with anything other than bed sheets and could smash through a plastic plant pot with ease
If you aren't an Engineer by now, you should be.
Particularly a Manufacturing Engineer, you're incredibly smart.
with love,
A Semiconductor technician
Bro you gotta make longer videos, 6 min is not enough i want more of this quality content, keep grinding !❤
In the first as minute and thirty seconds I could already tell he was a legend in the making
Bro, when he was looking for the channel members, he bent down and farted😂 0:27
make holes in the end of a barrel
like an end of a high force rifle (barret m95)
that should make it not break
Wouldnt the blaster have worked with normal darts if you put a muzzle break at the front to reduce the air pressure ?
Totally awesome! I'd recommend adding some rifling to make the dart spin, so that it not only goes more accurate, but also maintains it's velocity farther. You could probably 3d print a sort of scar barrel, or maybe even design a dart with spiral grooves in it? Also, for more velocity, you'd want the dart to be more light. Also, if you want to fix that dart bursting problem, you could consider wrapping the dart in tape, or alternatively, printing a jacket for it.
Also, I was thinking, do you think it's possible to make a nerf gun that can shoot around corners?
seems difficult
Nerf blasters that shoot around corners are a thing: Nerf Rebelle Cornersight, Adventure force CornerFire.
Could probably use a little fin stabilization if you're just going to make your own darts.
nice name matt
1:50
ty for reminding me to call her.
Now all we need is recoil
I feel like it's no longer a nerf gum since you changed every aspect of it, including the darts.
4:07 me when I was 12 shooting nerf guns out my window
If you could find some way to rifle to barrel it would fly a lot straighter but I’m sure you thought of that but yknow just didn’t have the very expensive tools to do it
ive never seen anyone use a pvc cutter for nerf guns ill have to try that
How do I get the unscrewed cycle? My clothes be having a few too many screws
Cool video like usual 🎉
is that an xbz tank on the gun? im asking cause i wanna do some modding on 1. xbz tank is a pump on 1 side that holds pressure till a release valve is switched
Yay he uploaded
Good work keep it going
I love your videos
Just figured I'd drop my two cents in, as I've seen and had this happen on more than one occasion with these air pressure blasters like the Orion and the AirTech line.
Depending on the size of you aluminum, it may be due to the fit being far too tight. Material like brass, CPVC, and aluminum are too tight for airguns. A lighter, slightly looser material may be your key here, and I would specifically preach on the benefits of PETG. Give that a shot and see if there's a difference.
Eh a little ductape or even just clear transparent tape fixes that issue very quickly.
I don’t know why this reminds me of the bolt action from day of the jackal
bro is really just a wish version of "i did a thing"
No scar barrel at the end? Of course your accuracy would suffer.