Adding HEATSINKS to cool down this HOT little Bitcoin Miner!
Vložit
- čas přidán 23. 06. 2024
- Order a Canaan Avalon Nano 3 Here: mineshop.eu/avalon-nano-3/?wp... use code RPM for $100 off over $500 Order!
Copper Heatsink Kit geni.us/utAf4Vn (PAID LINK)
RPM Tangem Wallet redpanda.tangem.com use code RPM for 10% OFF! My favorite and best way to store my Bitcoin, Kaspa, and many other cryptocurrencies
3rd Party PSU geni.us/lN4K
USB-C Cables I used geni.us/rQZTR
Trusted Crypto Mining Hardware Shops
www.redpandamining.com/truste...
FOLLOW RedPandaMining
► Twitter - / redpandamining
► Instagram - / redpandamining
► Twitch - / redpandamining
► Reddit - / redpandamining
► Discord - / discord
► Website - RedPandaMining.com
Talk with ME 1 on 1
redpandamining.shop
Crypto Mining Software I APPROVE
HiveOS geni.us/xTTb
My Favorite Book - "The Bitcoin Standard": geni.us/NH5spNd
As an Amazon Associate, I earn from qualifying purchases.
Email for Business Inquiries ONLY - Contact@RedPandaMining.com
DISCLAIMER: Red Panda Mining is not a financial advisor nor an expert. This is not financial advice. Everything said in this video is an opinion. The statements in this video are not investment advice. This video is intended solely for educational and/or entertainment purposes only. Always do your own research before investing in Crypto Mining. Never invest more than you can afford to lose. Red Panda Mining is not responsible for your losses or gains as a result of buying, selling, trading, or mining cryptocurrencies. - Věda a technologie
NOTE: THE small vrm power stage chip near the 2 large capacitors, please put a small heatsink and not a large one or else the casing when you put it back together may rip it off all together!
I think this happened to me and the vrm became detached. It's the very small block on the corner of the device.
Would it be possible to solder it back on? Or did I brick the device? Nothing looks damaged otherwise
Should you use the 80% rule when running the Avalon Nano 3 in high mode? If so power supply should be 175 watts?
Why is there no RED nano for RPM?!?
...this is unacceptable!
Lmao I can’t be associated with FIRES MAYBE…
Awesome, after out of warranty I will pop mine open and heatsink that inductor. Not too worried about it, I run mine on low. Says 80c 🤷♂️. Suppose to get Gan psu in one day July/August
Any hashrate gains from running cooler?
or just piece of mind?
I keep telling ppl, rig ks0 pro shroud and 120mm fan to pull exhaust air, the temps get reduced greatly, even better than heat sinks, the sinks would just be a bonus
That thermo gun be working hard
Could you please tell the size of the first heat sink that you put?I need to buy one
Well I followed the heat sink train. The tiny component just to the side of the fans is SUPER delicate. Its labeled 4r7. Well upon replacing the cover there must have been some wiggle as @RedPandaMining notes to refit the USB PSU - its snug. With heat sink it was too much for component and it snapped off with heat sink attached. 1 Avalon down for the count. :( Fork!
I have the same experience 😭😭. But I believe to have found the part
Damn, thanks for bringing this to our attention. I won't be opening up mine. It was designed to run this way.
That heatsink is anodized Aluminium not copper
could you leave the cover off and some how put a larger fan above the circuit board?
Chokes are always tricky imo I’m glad to see you finally modding it. ❤️❤️❤️
Super merci beaucoup, as tu le lien des dissipateurs ?
If the tiny vrm power stage chip gets detached is there a way to fix it? Could a heat gun work to reattach it?
@RedPandaMining What size are the fans and have you looked to see if noctua fans would be better?
will the nano work if you disconnect the cables that go to the screen and buttons on top of the cover? Im thinking of removing the internal out completely out of the case and control the unit just through web gui as I dont need the screens or buttons?
@RedPandaMining do you have a different temperature from Nano 3 in same place? I have 10°C from my two nano
I am getting 30 degres C diff on the T one (both H0 is 90)
And please write down the dimensions of all the radiators that you used
Why would you cool down a space heater?
any update on hitting a block? ty RPM!
Ive done so already... And it will slow down the fans as well
I think I'm gonna leave mine as it is. I received mine today, and yes it does get quite hot. Maybe after the warranty has run out I will. But it was designed to run this hot, that's why they advertise the device as a "Space Heater". 140 Watts of heat won't cause too much damage anyway
How do you get the cover past the USB I feel like I'm gonna break it
I think you can put it in without open the case with a tweezers or something similar.
I have two of those miners, one mining much less than the other, its reaching 58C (T) while the other mining better reaching max 38C (T). anyone having the same? considering removing than giant heatsink and add thermal past see if that help. Both (H0) temps is 90C, definitively in need of a heatsink like shown in this video, thanks
VRM is well in spec of temperature I believe they go up to 110
@redpanda did you gain more hash also please run a 120m fan over the main heat sink to see more hash possible
nah didnt gain more but at like 4.16th/s it says
@@RedPandaMining ah ok. Better watts at wall ?!
@@NizmoMiner nah same it seems
Canaan should do upgrades by users recommendations - put 4-5 heatsinks more, remove black "dust cathers" - charge me as customer 5$ more for each unit. I don't need to break warranty sticker.
If you are in the US - that sticker is a crime. Your warranty WILL NOT BE VOID for opening the device. Only if in the process you cause provable damage to the device. (in the US as previously stated)
a crime? the thing is his.
@@MSJ_raptor Removing the sticker is not a crime. Stating a sticker removal will void warranty is a crime. Specifically it is a violation of the Magnuson Moss Warranty Act.
@@cracklingice The thing is from Singapore.
@@MSJ_raptor The origin of the device does not matter. If it is sold in the US, it follows US warranty law for those buyers.
@@cracklingice yes, i know, but also, you would think the ppl at canaan would design it right. and if say you "void" the warranty, it's going cost far more than 100$ to what, sue them? could be a heat sink is a good idea however. but if i did it, i would not go back on the manufacture if it broke. the point of life is to enjoy it as best one might, not sure people over a 100$ device you re-engineered. lol.
These warranty void stickes dont void your warranty its not legal that they do
It's chinese companies they dont care lol, if you send it in for repair anyway probably cost more in shipping than to just get a new one
If you're lucky enough to be in the USA, that is true. I think the rest of the world would get their warranty void.
omg just taken mine apart to put heat sink bloody VRM just came off the board
Dude send me a picture of that contact@redpandamining.com
@@RedPandaMining that why i cant get a block pmsl
@@RedPandaMining still need that photo? It also happened for me😮💨
@@RedPandaMining damn... me too...
Which VRM came off exactly? Can u post a link to photo?
Hmm, cheap heatsink from Amazon. Don't know how effective the adhesive is for thermal transfer, and also note that the anodize adds a small amount thermal insulator.
If you are worried, buy "better" and put them in to maybe lower the temps more. Good Luck. Happy mining.
Great video! Thanks for providing this video to let us know about this issue. Also can you tell me the size of the heat sink you are using on your machine?
I have bought a few different heat syncs from amazon before. I've had the best results with Alphacool 17427 GPU RAM Copper Heatsinks on amazon. They are a little more than the kits but seem to have more surface area and drops temp a bit more. Hope this helps!
Fan speed is set according to the internal temp via two thermistors regardless of the heat setting. With all air restrictions removed, the inside temp doesn't get hot enough for the fan to increase to max RPM even if the heat setting is on high. This is the case with both my Nano 3's. Yes, it would be nice to have a manual setting in the app or web GUI.
when do these actually pay out into your wallet?
thanks for the info. Mine have shipped i should have them soon!
I can't wait for avalon to actually get around to shipping these miner out to all the backers. I order 4 of them on April 16 th and they still haven't got them to me yet. Bruh
1st cool electronics = happy electronics
USB C was pain in the ass 😅🙈
Better be careful bad mouthing THE LTT screwdriver or ifixit kit... Linus and jay lawyers coming for u
Hello I'm Thinking of Purchasing Ice River KS5L Hosting Plan on Their Official Website, Should I Go With It Please Explain Briefly or Make a Video on It.
These modern mos-fets can operate between 80 - 125C. That is why Canaan did not put a heatsink on it. Just like a lot of motherboards that don't have heatsinks on their VRMs either for that same reason, it's not necessary. Optimal is between 80 - 100C. If you're hitting the 90's on high, then you're good. But like too much heat... don't cool them too much either.
Didn't know the low temp was important too. Thanks.
I thought that was the case, it's designed to work at those temps.
Can someone please tell me the trick on how to open this I'm so afraid mine's going to break I've tried but I'm afraid I'm going to break it
don't do it, just leave it as is then.
I totally would how ever I feel like it runs too hot I know it's advertised as a heater but 185 asic temps seems super hi to me