I worked for a remodeling company where the two drywall guys would have taken 2 days to do that bare minimum. The one of them was getting paid 17$ an hour and had a company van too. So you're worth about 700 an hour out here lol
Man my tube makes such a mess when I'm applying it. Almost makes me want to throw the whole thing out. Are you using machine mud? And do you have it really runny?
I use bg promix or proform buckets for taping. The material needs to be reasonably wet to get it through the tube. But not to wet that it runs down the walls. The tapepro applicator allows me to have the material a bit thicker than if I was using a wheeled applicator. And once worn in it puts on the perfect amount of material. Alot of it is just technique.
@@Timmyskills it needs wearing in bud try running some 80 grit sand paper over it. . But the tapetech applicator puts up to much material imo. The tapepro applicator works well out of the packet and gets better the more you use it.
Fuck Jesus I just saw how In pain you must be after a year of that... Ho no 2 days. I you would like to cut In half all the taping applying rolling mudding all that in 2 step search techno banjo on CZcams as a brother I tell you for 150 dollar you can cut the roller cause the techno flusher aply it even if it's not perfly aply and it put a first coat while rolling it
I did my whole flat renovation from realy bad state to mint, but damn this looks extra fast my man, great job Sir
Cheers mate
I worked for a remodeling company where the two drywall guys would have taken 2 days to do that bare minimum. The one of them was getting paid 17$ an hour and had a company van too. So you're worth about 700 an hour out here lol
You bad youth..... great JOB keep it up bro......
Cheers mate
Quality work
Thankyou
Nice work
Cheers mate
Man my tube makes such a mess when I'm applying it. Almost makes me want to throw the whole thing out. Are you using machine mud? And do you have it really runny?
I use bg promix or proform buckets for taping.
The material needs to be reasonably wet to get it through the tube. But not to wet that it runs down the walls.
The tapepro applicator allows me to have the material a bit thicker than if I was using a wheeled applicator.
And once worn in it puts on the perfect amount of material.
Alot of it is just technique.
What applicator tip do you use? Mine doesn't seem to work that well.
It's a tapepro applicator mate.
Best applicator I've ever used and I've tried them all. Lol
@@andywhite1550 thanks for the info
Obviously his first time. ✌🏻🇺🇸
Couple of minutes watching on CZcams and I was away lol
😂
Does your applicator have 2 or 4 wheels
This is a tapepro applicator. Plastic. No wheels.
@@andywhite1550 wtf i have a tapetech plastic one that tips over constantly when applying.mud. wtf am i doing wrong
@@Timmyskills it needs wearing in bud try running some 80 grit sand paper over it. . But the tapetech applicator puts up to much material imo. The tapepro applicator works well out of the packet and gets better the more you use it.
@@andywhite1550 does yours have the little grooves in it to leave little ribbons of mud?
@@Timmyskills no mate. Just one consistent bead of material.
Hi what brand of flusher do you use? I have a tapetech one don’t easy to use.
I use the columbia flusher with wheels. 3.5 for first flush. 3 inch for final direct flush.
C’mon man, cut your tape clean and tight into the corners. Gonna have gaping cracks on this three ways!
Cant say I've had any issues with cracking in the 3 ways. But thanks fir your comment. 👍
They are tight if you look
Banyu
In sumer time you can't do this
Of course you can. I do it all year round.
Obviously not Australia ? There’s screws in the boards
@@leemcmurray880 the is in the UK mate.
Fuck Jesus I just saw how In pain you must be after a year of that... Ho no 2 days.
I you would like to cut In half all the taping applying rolling mudding all that in 2 step search techno banjo on CZcams as a brother I tell you for 150 dollar you can cut the roller cause the techno flusher aply it even if it's not perfly aply and it put a first coat while rolling it
Nice work
Thanks mate