You realize that all manufacturers have repair procedures that allow for this major of a structural repair right? Most of the time it's not worth it financially but it's a very possible repair.
I was just like that when I was at his age full of energy and to me working on car wasn't working was fun; fixing cars painting them cutting in half and getting them back in working order was the best! I miss those days! Good job Jack
A repair that has been crash tested unlike OEM repair procedures which aren't. I've done a lot of these repairs and would not have an issue with my family riding in that car.
Fantastic. For all you who just had to leave negative comments, go troll somewhere else. That was a fantastic save for that car. We are lucky to have talented people still around in this industry. I have a perfect 2010 Toyota Rav4 Limited that I have worked hard and spent the time and money to make it last forever for me. I love my Rav4 and a U-Haul truck rear-ended me. U-Haul insurance wanted to total it and give me $7k less than it was worth. I found a shop that would repaire it for what the insurance would give me. It turned out perfect and I have my Rav4 back! They were artist's and I got to come see them work on it! So I am thankful these kind of shops can be found!
The wrecked back end was then rejoined to a wrecked front end to make a completely wrecked car. Seriously your skills are amazing. I'm amazed at the transformation each time I see these videos!
Друг у тебя золотые руки, береги их одевай печатки и береги глаза одевай защиту или очки, смотрю твои видео с большим удовольствием, привет из России!!!
На самом деле коментарии выше действительно правдив. Сам факт того что это был распил опасен при ДТП. Ни дай бог конечно но оторвать ее может легко, т.к нарушена заводская конструкция. А в целом работа конечно же прекрасна. У нас в рашке сделают на отьебись лишь бы поскорее деньги заработать
While interesting to watch. I wonder about the safety of the vehicle after the repair and will never look at a wreck on a car fax the same way. Just because you can bend it back, should you?
@@kirillkovalevich6164 и не только из Владика. Мы тоже в Волгограде пилим, режем, варим, красим обычным клиентам. Правим ланжероны и т.д. Да чё мы только не делаем. Тут же вопрос качества работы
It should not be on the streets again. This is dangerous and stupid. Sell it for scrap and buy a new car if that person values the life of themselves and their family.🫣👎🏼
Actually, that bit isn't very difficult at all. Most cars share the same general layout. The thing that stands out here is the skill and proper workmanship. The repair is done very well and results in a safe car.
For those that are in the know...why did they stretch the back out just to cut it off later? Were they aligning something on the car that is forward of the cutoff section?
Great work for sure, I hope the new owners have this information disclosed to them, before buying a car that was sliced in half and then repaired. Imagine being T-Boned After a repaid like this, Your better half would be elsewhere. 😂😂
Most manufacturers have repair procedures for this kind of repair. It's no different than replacing structural pieces or a wrinkled floor pan, only the back half was already assembled with factory welds. This car is just as safe as new.
@@vinylmotivations yeah i used be the type thinking "it's only supposed to be welded once at the factory and never again" but late common sense came to me.... if they do it with the correct instructions , it might as well be at the factory , effectively
Yeah remember it being a big thing in the 90s two right off cars, the back of one and front of the other welded back together, then they’d break in two again on impact on in. Minor collision, there where ads on tv about cut and shuts because so many dodge people where doing them
This guy is good, I have been following his videos.I just hope he is passing his skills to someone else so that when he's not around the job keeps going
So that the other scammy mechanic can take over? This car is not structurally sound. Every rear bump will result in catastrophic failure of the frame and endanger the passengers
I can see both ends of that. On one hand side it’s sort of a sketchy repair method (but well done nonetheless) but on the other hand there’s less fortunate people who need a car. The only issue I have is if these repairs aren’t disclosed. I don’t know the system in china or wherever this country is.
I watch one of these videos once a day. It's unbelievable the way this guy saves wrecked automobiles and puts them back together. You caint even tell they have been smashed
Incredible natural eyelid eye protection and finger tip skin protection when using spot welder. I thought it was a bit wimpy to have a guard on the angle grinder.
@@ruiandrade7535 Hola Rui. Así es. Aprecio mucho la capacidad que tienen Me, pero me preocupa verlos usar la amoladora y no proteger sus ojos de los chisporroteos. Te mando un saludo grande.
You don't need structural integrity when you have Mechanic Jack!
Lol
You realize that all manufacturers have repair procedures that allow for this major of a structural repair right?
Most of the time it's not worth it financially but it's a very possible repair.
Mechanic Jack doesn't GAF, he's all about making them dollars!
Edit: /s
@deezoG8 that's simply not true.
@@vinylmotivations you'd need to change the frame not just bend it back in shape.
I was just like that when I was at his age full of energy and to me working on car wasn't working was fun; fixing cars painting them cutting in half and getting them back in working order was the best! I miss those days! Good job Jack
Same to me Bro. Time flies.
❤❤
A repair that should never be done but great work
Re-entering the same car after healing your bones. Yuck.
@@mitchsterling3266 negative iq... the crash was at the back of the car so i doesnt hit driver
A repair that has been crash tested unlike OEM repair procedures which aren't. I've done a lot of these repairs and would not have an issue with my family riding in that car.
Exactly. This repair was done to manufacturer specs.
Какая нахрен спецификация? Нарушена силовая структура кузова. По факту, это ТОТАЛ.
I did collision work for 12years and I've got to say these young men are good at what they do,I'm impressed!
You won't be impressed when you buy something they fixed.
@@shamancredible8632 Why not?
@@shamancredible8632ГД. Б мг хз😮😮😮😮😊PLO
If it's done correctly then why not
Fantastic. For all you who just had to leave negative comments, go troll somewhere else.
That was a fantastic save for that car.
We are lucky to have talented people still around in this industry.
I have a perfect 2010 Toyota Rav4 Limited that I have worked hard and spent the time and money to make it last forever for me. I love my Rav4 and a U-Haul truck rear-ended me. U-Haul insurance wanted to total it and give me $7k less than it was worth.
I found a shop that would repaire it for what the insurance would give me. It turned out perfect and I have my Rav4 back! They were artist's and I got to come see them work on it!
So I am thankful these kind of shops can be found!
I am in awe. Didn’t even think that was possible. That’s amazing.
In the west, it would be uneconomic because of the labour costs. That car would have been written off and crushed.
Can't believe he cuts and fits the cars back in a single fit. So fast. Amazing superman.
Hahahahaha 🤣
The wrecked back end was then rejoined to a wrecked front end to make a completely wrecked car.
Seriously your skills are amazing. I'm amazed at the transformation each time I see these videos!
Hahahahaha hahahahaha 😂😂😂
Супер работа! Учусь по видео на старости лет... 😊
This is a master at his craft. All smiles with no safety equipment.
I'm amazed at the quality of work they do
엔지니어 기능공천재
입니다 순발력 최고
응원할게요 👏👍💝
Truly, your videos are a real learning experience.
Brilliant, a long version of the guy with the golden hands, and his perfect repair! 🛠🎨👌👍
Imo, this is better for both the economy and environment rather than buying a new car. Awesome job, Jack!
Тебя в Россию нужно !!!! Тут работы не початый край. Молодец! Мастер своего дела
It is a joy to watch these guys repair the cars. Perfect results. Very satisfying. 😊
Love this guy. More videos of him please. Thanks 🙏
He's awesome! Especially when he smiles at the camera ☺😅
Друг у тебя золотые руки, береги их одевай печатки и береги глаза одевай защиту или очки, смотрю твои видео с большим удовольствием, привет из России!!!
Да если это точило попадет в аварию разорвет ее на две половины глоб на колесах
@@user-bt7fr9yl1r да ты видимо на СТО работаешь, или на автозаводе, эксперт
@@user-bt7fr9yl1r на русских тазах с завода нет такой безопасности как у них после аварии 😂 так что не бзди
На самом деле коментарии выше действительно правдив. Сам факт того что это был распил опасен при ДТП. Ни дай бог конечно но оторвать ее может легко, т.к нарушена заводская конструкция. А в целом работа конечно же прекрасна. У нас в рашке сделают на отьебись лишь бы поскорее деньги заработать
The most beautiful thing about this young man is his constant smile.
That would suck if the whole back end fell off as you drove away! Beautiful work by a very talented young man!
Yeah but at least the front didn't fall off.
Que profissional incrível
This is when you love what you do and put your heart and soul to it❤
Or as some people would say. Make fortune from trash
And endanger the customer because the vehicle isn't structurally sound. This is how to scam people and they're even cheering you on
@@TheRealSpork.
There is no way I would drive that car again.
While interesting to watch. I wonder about the safety of the vehicle after the repair and will never look at a wreck on a car fax the same way.
Just because you can bend it back, should you?
По видео складывается впечатление, что все легко и просто. Молодец парень, руки из нужного места растут)
Но, на такой машине больше нельзя ездить.
@@xettxattusa пол страны на распилах ездиют, и из Владика по сей поры их везут
@@kirillkovalevich6164 и не только из Владика. Мы тоже в Волгограде пилим, режем, варим, красим обычным клиентам. Правим ланжероны и т.д. Да чё мы только не делаем. Тут же вопрос качества работы
Я всегда усиливаю стойки и усл.порогов с двойки
Надо сразу писать номера контор ритуальных услуг
Muito bom o trabalho....achava que um carro nestas condições não voltaria transitar nas ruas. Parabéns 👏🏽👏🏽👏🏽👏🏽🇧🇷
Q
It should not be on the streets again. This is dangerous and stupid. Sell it for scrap and buy a new car if that person values the life of themselves and their family.🫣👎🏼
The work is just impeccable. Thumbs up
Great job.
Всё очень классно 👍 получается у тебя дружище, здоровья тебе и успехов в жизни, респект! 🙌
Sois un equipo muy bueno ,impresionante la reparación del bluebird(sylphy).buen trabajo....👌👌👌
What an amazing 👏 job
Мастера профессионалы!!! 👍
I’m amazed they can remember how all the interior pieces go back together.
Actually, that bit isn't very difficult at all. Most cars share the same general layout. The thing that stands out here is the skill and proper workmanship. The repair is done very well and results in a safe car.
@@jakubkrcma I’ve taken a few care interiors apart and the fasteners are all different everywhere wire routing etc.
@@totalyep Yep, details are different but it's pretty straightforward once you get used to it.
他修理的地方就是日产的4S,配件与技术图纸是有的,长时间的修理让他有很强的能力。
عمل ممتاز أعشق النظر إلى هذا النوع من الفن قمة فالإتقان
For those that are in the know...why did they stretch the back out just to cut it off later? Were they aligning something on the car that is forward of the cutoff section?
Tá aí um profissional de respeito 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Incredible work. Great talent.
Used car dealers all over America are salivating and taking notes as they watch this!
What was commonly known in the 80s in the uk at least as a ‘cut and shut’
These guys love there amazing jobs.👌👍
Unbelievable restoration of a total loss vehicle …… this guy would make a fortune in this country with His unreal skills; absolutely amazing !😎
... The his service always is very good ! At past l worked on this area.
A strong embrace !
I definitely wouldn’t want to crash that car again tho 😅😅
He just needs a a little more safety gear.
What country? Not the United States, that car isn't road legal anymore.
That's how I did that in the 90s. I was a rock star paint and body tech
Great work but that is known as a 'cut n shut' which if involved in a hard side impact or T boned it is very likely to split in too again 😱
Im wondering that too. 🤔
Not if it is done properly. Which this was, many are not. I'd happily drive this.
Now that's a true definition of someone who love his work
Mais um carro recuperado com sucesso. Parabéns
Funilaria boa é outro nível , vocês são Tops !
Awesome work my friends
nice to see old school work
Машина из фольги 0.0 мм 😆, Отличная работа друг! Так держать! 👍👍👍
Но вот маску сварочную используй! ГЛАЗАА-А-А! Их беречь нужно!!!!
Глаааааазаааа!!!
Amazing results
You are amazing.
Rebuilt the car .
Fantastic and perfect job.
Great work for sure, I hope the new owners have this information disclosed to them, before buying a car that was sliced in half and then repaired.
Imagine being T-Boned After a repaid like this, Your better half would be elsewhere. 😂😂
It's called a "cut and shut" and in some countries it's not legal as it's deemed a consumer risk, not only with respect to fraud, but also safety.
Most manufacturers have repair procedures for this kind of repair. It's no different than replacing structural pieces or a wrinkled floor pan, only the back half was already assembled with factory welds. This car is just as safe as new.
@@vinylmotivations yeah i used be the type thinking
"it's only supposed to be welded once at the factory and never again"
but late common sense came to me.... if they do it with the correct instructions , it might as well be at the factory , effectively
In the UK that's called a cut and shunt and is incompletely illegal.
They will never know. Many vehicles repaired in that manner are on the road in the UK.
In the USA as well
Yeah remember it being a big thing in the 90s two right off cars, the back of one and front of the other welded back together, then they’d break in two again on impact on in. Minor collision, there where ads on tv about cut and shuts because so many dodge people where doing them
USA have no standards UK does
Vin numbers for front and back where brought in to resolve this issue
Wow excelente trabajo 👍
Amazing work 👏
Мастер огонь! Четко делает!👍👍👍
Simplesmente um bom trabalho tá de parabéns 👍
Protect your eyes when you welding. You will caused your eyes problem when you are old. Please be safe.
Wow...what an speciality and skillful workers...
O gênio da lanternagem automotiva!
Este camarada trabalha bem demais e ótimo 👍👍👍👍👍
Aí sim vc é um super mecânico, estou te vendo aqui do Brasil, top ver este vídeo.
Fantastic job 👍🏾👍🏾👏🏾👏🏾👏🏾👏🏾
Excelente trabajo, aquí en México ya lo hubieran declarado pérdida total
Asi es ese carro hera perdida total estubo muy duro el chingadaso es una amenasa ese asquero carro
This guy is good, I have been following his videos.I just hope he is passing his skills to someone else so that when he's not around the job keeps going
So that the other scammy mechanic can take over? This car is not structurally sound. Every rear bump will result in catastrophic failure of the frame and endanger the passengers
You do the greatest work on cars & trucks😊
Yellow - skinned hammers🤩👍
Вот это мастера👏👏👏👍
This is absolutely not legal where I live. For a reason.
Marvellous 👍👍👍👍 Good job 👍😊😊
Wow, , , great work, 👍👍
Варить без маски или очков это нечто.
Да это вообще писец. Абсолютно бесполезная работа. Это всё отвалится
Trabalho perfeito parabéns 👏👏👏👏👏👏👏
What a great work very 👍
These guys are the best! I'm a professional bread delivery driver so I know greatness when I see it 😅
That wreck would be crushed in the UK, by law.
I can see both ends of that. On one hand side it’s sort of a sketchy repair method (but well done nonetheless) but on the other hand there’s less fortunate people who need a car. The only issue I have is if these repairs aren’t disclosed. I don’t know the system in china or wherever this country is.
Great job !!!!
потом у официального дилера в России небита не крашена
Great work 👏
Perfect Job! 👏👏👏👏🇧🇷🇧🇷
How about the fact that the structure of the passenger cabin is compromised now another death trap hits the road wow !!!
I watch one of these videos once a day. It's unbelievable the way this guy saves wrecked automobiles and puts them back together. You caint even tell they have been smashed
Nice job !
Incredible natural eyelid eye protection and finger tip skin protection when using spot welder.
I thought it was a bit wimpy to have a guard on the angle grinder.
Trabalho magnifico parabéns Fernando Brasil 🇧🇷
Os china são doido mesmo
Great Job love to watch you work 😊😊
Master of the work!
Muito bom! 🇧🇷🇧🇷🇧🇷
Now one car crash from the back and you go straight to god 😂
Hahahahaha hahahahaha 😂😂😂
You do great work and your Jack 📸🏆👍 friends that work with you
Very impressed..!
Nice one Mechanic Jack.
Good as new.
Top 👍👍👍👍
Tudo feito com amor é carinho é dedicação é simplesmente fantástico 🇧🇷🇧🇷🇧🇷
Hola Rui, buenas noches.
Pero no usan protector ocular.
@@estebanjosemerlo verdade irmão segurança em primeiro lugar
@@ruiandrade7535 Hola Rui. Así es. Aprecio mucho la capacidad que tienen Me, pero me preocupa verlos usar la amoladora y no proteger sus ojos de los chisporroteos. Te mando un saludo grande.
@@estebanjosemerlo verdadero amigo seguridad primero buenas noches
The frame isnt intact.
This car is dangerous.
It just looks kinda good from the outside again.
This is a scam
So very efficient , very impressed
echt schuper
Muito legal, parabéns! Meu sonho é aprender essa profissão.
You want to become a scammy mechanic?
This car is not structurally safe. It just looks good from the outside
That was awesome to watch, it brings me back to days when. I worked at Toyota, watching are body shop guys work
Wow so amazing 😍
Parabéns belo trabalho
Adoro ver os carros que fazem as reparações muito bons!
These dudes deserve the world! Great job guys!
Awesome job, truly talented people