How To Make A Simple Leather Wallet Using Basic Tools - Leather Craft Basics

Making a simple leather card wallet using basic tools. In this leather craft video I set out to make a leather wallet that is designed with simple construction and can be made with a minimal amount of basic hand tools. The wallet is made from just four pieces of chrome tanned leather and is hand stitched together for great durability. It features two outer card pockets and a center pocket that can be used for holding cash. The outer card pockets feature open slots that allow you to push cards up for easy access. I hope you enjoy this leather craft video on how to make a simple leather card wallet. Check below👇 for dimensions, tools & materials.
What is the Gospel?
• What is the Gospel? | ...
Check out my work on my Instagram account .
Follow me at:
/ kingdomgloryleather
Dimensions:
Inner Pockets Pieces, Template Size: 4-3/4” X 3-3/8” (121mm X 86mm)
Outer Pockets Pieces, Template Size: 4-3/4” X 2-1/2” (121mm X 63mm)
Push Slot Size (On Template): W: 3/4” (19mm) L: 1-3/8” (35mm)
Finished Wallet Final Dimensions (After Trimming): 4-1/2” X 3-1/4” (115mm X 83mm)
Tools Used:
- Scratch Awl
- X-Acto Knife (Or box cutter)
- Cork Backed Ruler
- Barry King French Edger #5 (Or skiving knife)
- Wooden Slicker (For burnishing)
- 6mm Diamond Prong Pricking Irons
- 11oz Round Maul (Or soft mallet)
- Weaver Edge Beveler #0
- Needles
- Dime (For marking rounded corners)
Materials:
- 2mm thick chrome tanned pull-up leather.
- 0.8 Ritza Tiger Threaded (Beige)
- 1200 grit sandpaper
- EcoWeld Contact Adhesive
- Cotton Swabs (For applying adhesive)
- Tokonole (For edge burnishing)
0:00 Intro
0:07 Tracing Wallet Patterns
0:43 Cutting Out The Wallet Pieces
1:26 Thinning Down Outer Pocket Edges
2:02 Cutting Out The Push Slots
2:54 Beveling The Pocket Edges
3:50 BurnishingThe Pocket Edges
4:34 Marking The Glue Lines
5:13 Gluing Together The Inner Pocket
5:39 Gluing On The Outer Pockets
6:25 Trimming Off The Excess Leather
7:02 Rounding The Wallet Corners
7:45 Beveling The Wallet Edges
8:23 Marking & Punching The Stitching Holes
9:21 Preparing The Thread
9:44 Hand Stitching The Wallet
10:22 Sanding The Wallet Edges
10:35 Burnishing The Wallet Edges
10:58 The Finished Wallet
#kingdomgloryleather #kglwallets #kglbasics #wallet #leatherwallet #leathercraft

[@KingdomGloryLeather]

What is the Gospel?
👉 czcams.com/video/KmKZJx5AlWY/video.html 👈

[@charlesbunn2118]

I appreciate craftsmanship, and with the peaceful music these videos are a relaxing joy. Thank you

[@KingdomGloryLeather]

Thank you. A lot of my videos are fast paced, so I wanted to make this one more chill.

[@martinstults9419]

Ditto on the music. I almost fell asleep. Very relaxing.

[@AUGMotorSport]

Always Amazing, Thank You!!!

[@KingdomGloryLeather]

Thanks for watching.

[@DLSWV]

I like it. 👍😉. Thanks.

[@KingdomGloryLeather]

Thanks for watching.

[@robertgolden1080]

Excellent project.

[@KingdomGloryLeather]

Thank you 🙏

[@KingdomGloryLeather]

If you are a beginner and you are not comfortable with skiving (thinning) the pocket edges, you can probably get away with no skiving at all if you use thinner leather for the whole wallet.

[@leeslegacywoodworking5405]

Wow! Awesome job!,,

[@KingdomGloryLeather]

Thank you!

[@mrmongsajai7114]

Wow so nice

[@KingdomGloryLeather]

Thank you so much!

[@user-oq1zb4ex2k]

👍👍👍

[@V3leathercraft]

Superb simplistic design 👍🏽👌.
Too much tokonole 🤔🙄?
Which company French skiver?

[@KingdomGloryLeather]

Thanks. Barry King #5

[@JDK45ACP]

How long did that little project take? Loved the video.

[@KingdomGloryLeather]

I don’t remember exactly but something like this can be done in about two or three hours.

[@Foula3la__2]

Please 🙏 where can you buy this equipment electronically ?

[@KingdomGloryLeather]

eBay.com Amazon.com tandyleather.com weaverleathersupply.com

[@Foula3la__2]

@@KingdomGloryLeather thank you so much 😊

[@lucdicaire4771]

Where i can but those tool

[@KingdomGloryLeather]

Try Weaver Leather Supply, Tandy Leather, RM Leather Supply, Ebay.