Video není dostupné.
Omlouváme se.
NEW AUTOBEAM PERFORMANCE LED PUDDLE INSTALL! | FOCUS RS
Vložit
- čas přidán 27. 06. 2019
- I install the NEW Autobeam Performance LED Puddle Light upgrade for my Ford Focus RS!
The Autobeam Performance puddle kit consists of 2 of their LED puddle units. These replacement units dont simply replace the old bulbs but fully replace the whole unit and have a full LED panel incorporated inot the new housing!
These LED units are easy to install and are super bright!
In this video, I do the the install, giving you an overview of the step by step process so you can have the performance LED puddle light upgrade from Autobeam in your Ford Focus RS in no time!
As the units require no additional resistors or parts, changing from the old bulbs/housings to the Autobeam LED version, gives an extra modern, stylish look and functional benefit to the Focus RS in a very short amount of time!
The old puddle bulbs work of course but when you upgrade to these new Autobeam units you will see just how much better these are!
The Autobeam LED puddle housing are a perfect fit so have a nice OEM look. The LEDs are also instant instant on/off and should last longer than the standard bulb.
The Autobeam Performance LED Puddle upgrade gives a wider spread of light on the ground and around the door in general so are much more useful than standard and are a very clean, white light as opposed to being a sort of yellow colour like the standard bulbs!
This product is now on sale so if you want to upgrade just hit the link below:
autobeam.co.uk/collections/ne...
Check out my teespring store:
teespring.com/stores/adam-rainey
Check out www.becauseracecarbox.com and get your own awesome automotive goody boxes!
GET 10% DISCOUNT WITH CODE 'ADAM'!
Ships to Europe and USA as well as UK!
Subscribe to my channel: bit.ly/29hfAm6
Instagram: bit.ly/2930j8A
Twitter: bit.ly/2930j8A
Check out Mishimoto at:
www.mishimoto.co.uk/
/ mishimoto
/ mishimoto
I watched your video on installing the Autobeam sequential LED strips for the mirrors. I bought a set of sequential LEDs for my Focus ST and have had a hard time trying to install them since I don't really have the right set of tools. I had no idea you could just pop off the side mirror so easily and didn't even consider it. This is going to help me with the installation. So, even though this video is for a different car (Not all that different though, eh?) I just wanted to say thanks because it still helped out!
Just picked up a RS a week ago and your videos are very useful, thank you mate
Hi Adam just changed my puddle lights 4 the AB blue look amazing thanks 4 your tuition its so much easier taking the glass out
THX Adam, I tried to change that led from AliExpress but hesitated because I have no idea how to disassemble, you taught me. :)
Glad I could help :)
Thanks for this video. I've changed my puddle light and reverse lights
No probs mate, thanks for watching! :)
Thank you for this great video.
It is a very simple change, looks way better. If you combine it with changing the sequential blinkers, it is even easier to get the cover off.
Cheers :)
I was littered just looking at getting these! Haha. Another great video mate.
Cheers mate :D
I'm loving my Autobeam lights, I didn't see any puddle lights for the little FiST but will keep an eye out. These look so crisp and clear. Another nice vid 👌
Cheers mate :) These are pre-release so hopefully there is a Fiesta version in the works too!
Hello Adam, another great video, you make it look so easy to fit. Very interesting this one but I think I will only replace when the original brake. However I loved the video. ( I say this after I watched your Mountune charge pipe upgrade and then I ended up going for the full Mountune host kit! 😱😱😂
I probs wouldn't have thought of it by Autobeam asked me to review before release so I went for it! Nice one on the hard pipe, I was looking at potentially getting the hoses there a couple of days ago but they were out of stock in black (classic Mountune I know lol)
Great video thx!
Very helpful video's if you don't want things wrecked, Thanks 👍🏻
Thanks Menno :)
I’ve got to stop watching these, it’s costing me a fortune 😆 thanks mate
No worries mate, money well spent ;)
Looks so much better buddy good upgrade 👍👍
Cheers mate :)
Excellent video. You made the process really clear.
Cheers Andrew :)
@@AdamRainey no worries! I went and bought a set of those puddle lights too. Forgot to use your code though. Doh!
Great vid, and I wish my 18 RS came with puddle lights but My ST had 'em and I miss 'em, A LOT!! I didn't even know RS' came with 'em at all... or is it a US thing not having 'em? I really want to have puddle lights again :(
hi Adam great video, do you know if they make theese for the Fiesta st .
Hi Adam,where can i find the side mirror. My RS do not come with those ones.
Nice stuff, i will do this to in the near future =) Thanks for this usefull vid.
It is very much a worthy upgrade! Cheers :)
@@AdamRainey I was looking this morning at the lights after watching your video yesterday, looked like mine already has it, I'm confused haha. I see you have some more nice upgrades in different video's 😎 gonna watch those to.
Lookin' good!
I agree! Cheers Dave :)
my car doesn't have a line for those lights, where can I get electricity for it?
another good informative video AR. I have the replacement bulbs from Autobeam already. I would be surprised if these new units are sufficiently brighter to replace those? However, the replacements I got from Autobeam are much better than the stock bulbs. So def worth considering if folks are on the standard lighting.
I'm not sure if they would be significantly brighter Gary, these are just a new product that Autobeam are going to be selling soon!
Great video. Wish I had your reassuring click getting it in to place! Hour later and out come the chopping tools! Lol 😭 I will get I in to place!
Did you get it to work? I am missing the click also...
@@MrLiipasin yes, eventually! I had to cut a bit off as it was to big for the housing on the mirror. Poor quality for the money.
@@neilospencer i got it done also just a minute ago. I shaved little bit off from the led housing and little bit off from the underside of mirror where led housing "clicks". And with brute force got them to click. Maybe there are some variances in the mirrors, Adam's led's went in nicely.
Hi there m8 do you know if these will fit the m2 Rs 👍
Hey Adam. Watched a few of your vids. Wonder if you can help. I have them show indicators. Comes with led connector but also a green thin cable. No instructions where it goes. Any tips, please?
Send me a DM on Instagram or Facebook so you can send pics that might help work it out
Hoping these get released for the fiesta st been wanting them upgraded for ages
Hopefully mate yea, I am sure they have a few things in development ;)
Do you know if power folding mirror with puddle lights will work on a 2008 Focus wiring etc?
I would imagine they are pretty similar if not the same, the mirror design didn't really change much between mk2 and mk3
Can u still move the mirror well, with the original housing just behind it?
The housings are identical so mirror movement is unaffected
Hi Adam.Did you ever do a video on installing the Autobeam cornering H1 bulbs?
Hi Ian, no sir, they aren't as easy as you might think
@@AdamRainey thanks Adam
Are you going change your rear lights/brake lights? Thinking of doing mine
Hi Charlie! I have already done my rear lights - here is a link to the brake light upgrade: czcams.com/video/NDSdI_sQ9w0/video.html
Is there a dipped beam headlight bulb/led unit coming for mk3 rs?
Maybe Charlie :)
Still no update video on the carbon mirror covers?
They have gone silent since they received them back, refused to give me a refund. They are total crooks and A holes
Having difficulty fitting these. Got a set for my mk3 late 2013 titanium and the edge with the clip will not fit as one corner seems bigger than the corner cut out in the mirror?
No, I found fitment to be perfect
Ok, thanks for the quick reply. Guess I'll have to slightly file the corner down in the mirror.
Is this the same process for the starboard Zetec s Focus
If you have puddles already then yep, it should be
So cute bro
Oh I know I am :)
Hi Adam nice we install there ... any idea when Autobeam will release these to us mere mortals?! lol
Cheers Nigel :) That is a good question - they haven't told me but I would guess pretty soon!
@@AdamRainey Available now and I've ordered a set Adam ... autobeam.co.uk/collections/new/products/led-501-mirror-panel-unit
UPDATE: Arrived today ... one day turn round amazing!! Fitment was spot on and they give a nice white light and much "cleaner" than OEM
Do the U.S. RSs have this or is this a UK only option? I don't remember seeing these on the RSs I've seen stateside
Not available on US models.😢
@anonamos6086 funny thing since then I've discovered the STs atleast the PFLs have the puddle lights, so a retrofit would be possible, I wonder if the circuitry is all the same on the UK and US MK3 models, if so, then it would be very easy to install
I'm having no end of problems trying to drop the original housing. It almost feels stuck. Any ideas?
Have you removed the little screw?
@@AdamRainey yeah I had done. I gave up in the end and just put the OEM housing back in the other side (which I had been able to get out easily enough) and bought some LED W5Ws. Seems okay and saved me breaking anything in the mirror itself.
Bro, спасибо 😎👍
You got it :)
Should have gone for the rs logo in the floor 👍 looks amazing
Yea they are cool but Autbeam let me have these pre-release so I am very happy to accept :)
Adam Rainey yours still look cool mate good job ! I don’t have the fold in mirrors so I can’t have them 😳
Cheers Michael :) I am sure someone could swap the mirror units on the aftermarket ;)
Adam Rainey I’m looking right now hahah 👍💎
Is this only for the Euro RS
Not sure, even over here not every RS has puddle lights to upgrade to these so a closer look on your particular car would be required
Is it the same process for ford kuga mk2? Thanks
Hello, if you have puddle lights then the process should be broadly the same :)
Adam Rainey Cheers matey!
What years have this
Hello, I think it is part of a upgrade pack as opposed to the year
hey what rpm do you usually shift threw
Depends on what I'm doing, normally I work by sound and feel rather than specific rpm. The answer is probably about 4-5k. If driving the folks about I will granny shift tho and if playing with launch control then probably about 6k
Don't think he got it XD
Hello adam. I just bought these today but found it a massive struggle getting it into the drivers side. The passenger side went in perfectly and the original drivers side would come out and go back in with ease. But the autobeam one just wont go in. Any idea why? Tia
Possibly something is bent. When you say it won't go in, does is go in and not click or does it not make it all the way into the hole?
Not to worry now mate 👌🏼 got it all sorted in the end
My rs sucks, it doesn't have all the good stuff like these
Why not just change the bulb?
It is a fully sealed unit - you would break it if you tried opening it. So effectively this is changing the 'bulb'
@@AdamRainey What is a sealed unit? Once you take out the bulb you can just replace the bulb and refit it. I just did it this afternoon.
My only concern is when it rains. The plug is to exposed to water.
No it isn't, it is sealed as much as the stock bulb by the rubber socket
Guess I heard my name wrong, as 3rd place winner, ,!!... Not heard owt,
I have replied to you multiple times on here telling you to private message me so I can get your address
@@AdamRainey,, sorry, don't know what you mean,
@@John..18 I need your address to send you stuff and I am sure you don't want to put your address on here so I need you to send it to me on facebook or instagram and then once you do that, I can have the wee packet in the post the next day
@@AdamRainey
Sorry, I don't use, Facebook or Instagram,,
Adam 12 for a 12 petcent discount!
Name ur channel adam 100 plz for 100 percent off