My 15 yr old son watched this video. Took 3 bad displays out of a Mata Hari we’re working on. He diagnosed 7 bad resistors and quickly replaced them. Save us $150 for new ones! Thanks so much!
Beautiful video. I have a box of bad 6-digit displays to fix later and a few 7-digits that I need to fix right now for league night. It’s great that someone your age is interested in fixing these antiques. Your tutorial skills are top-notch.
This was one of the most helpful pinball videos that I have seen. Im definitely not a newbie either. How about a video on repairing Williams 80s displays?
Love it. Keep these up. One issue I just came across (not fixed yet), one bad resistor, replaced, and now that display sets all displays to act...wonky. It shows erratic numbers. So keep up the good work, we'll all benefit from your efforts. Thanks!
Excellent video. My displays stopped working and all fuses checked out and voltage. Started working through the fuse connection and it was faulty. Thanks for explaining in detail and providing great visuals.
Awesome work with these displays! I, too, am working out display problems, although a completely different type (troubleshooting issues with a dot matrix display in my prototype Alvin G Mystery Castle). The display itself keeps randomly rebooting and sometimes when I turn the machine on the DMD doesn't turn on at all. Otherwise, it works perfectly minus those 2 problems, no dots/rows/columns missing. It's been tough, not a lot of info on Alvin G games out there, but I *think* most DMDs are the same between companies, which gives me hope. Anyways, awesome stuff! I'm trying to learn as much as I can so I can own my own arcade one of these days! :)
Very weird that the 2 resistors were missing. Also I have that component tester as well, I really like it, fast way to test all sorts of stuff, and it was pretty cheap. I started with a green mat exactly like yours, but just got a nice silicone one with tray spaces, it feels so cool, and it don't curl on the edges like the green ones do. Thanks man.
Very nice video! First thing I usually look at is the 100K resistors and the header pin connector solder joints when missing any digits or strobing or no digits at all. I have one display somewhere in a box of those that made the driver board blow smoke rings on th HV section. Shorted display tube? What about when all the digits, in self test, count wrong? Is that the 14543 chip? I haven't looked at your other videos yet.
Brilliant video thanks a lot. I see you were working on a silverball mania machine, that's what I have. Im not as knowledgeable as you and have built the machine up with a lot of luck and parts scavenging. I have power to it after fixing the board and some flippers work, no sound yet and the number displays don't have numbers just some dots. I'm trying to get a soundboard atm any ideas where? Any help would be most appreciated. Kind regards Keevor
I just had this problem and the digit was out because of a problem with the top left connector on the mpu board. Repinning and rebuilding that connector solved the display problem.
My 15 yr old son watched this video. Took 3 bad displays out of a Mata Hari we’re working on. He diagnosed 7 bad resistors and quickly replaced them.
Save us $150 for new ones!
Thanks so much!
Beautiful video. I have a box of bad 6-digit displays to fix later and a few 7-digits that I need to fix right now for league night. It’s great that someone your age is interested in fixing these antiques. Your tutorial skills are top-notch.
Great visuals on finding and fixing board problems. It's one thing to talk about how to repair but it's way better when you show it too. Thanks
This was one of the most helpful pinball videos that I have seen. Im definitely not a newbie either. How about a video on repairing Williams 80s displays?
This is super helpful. I am trying to get all of my Flash Gordon displays up and working.
Excellent step by step troubleshooting. Learned a lot. Thanks for sharing your knowledge.
Thomas Mickle Thanks!
Great video! Love the work you put into this. Keep it up!
Thanks for such an in depth video. Your explanations are very clear and now I'm going to go fix one of my displays!
Really great video, thanks. Great diagnostic skill and well explained!
Love it. Keep these up. One issue I just came across (not fixed yet), one bad resistor, replaced, and now that display sets all displays to act...wonky. It shows erratic numbers. So keep up the good work, we'll all benefit from your efforts. Thanks!
Well-done vid with no annoying background music! Thank you! Would have liked to have been able to see the chip removal at 9:00.
outstanding video...nice work!
You should have 282K subscribers. Seriously.
Excellent video. My displays stopped working and all fuses checked out and voltage. Started working through the fuse connection and it was faulty. Thanks for explaining in detail and providing great visuals.
Super helpful, much appreciated
Great Video, Thanks
Thanks for sharing, very informative...
Great vid, thanks very much!
Awesome work with these displays! I, too, am working out display problems, although a completely different type (troubleshooting issues with a dot matrix display in my prototype Alvin G Mystery Castle). The display itself keeps randomly rebooting and sometimes when I turn the machine on the DMD doesn't turn on at all. Otherwise, it works perfectly minus those 2 problems, no dots/rows/columns missing. It's been tough, not a lot of info on Alvin G games out there, but I *think* most DMDs are the same between companies, which gives me hope.
Anyways, awesome stuff! I'm trying to learn as much as I can so I can own my own arcade one of these days! :)
great video I learned quite a bit, I have obtained my first pinball machine and like to know how to fix and maintain it
Very weird that the 2 resistors were missing. Also I have that component tester as well, I really like it, fast way to test all sorts of stuff, and it was pretty cheap. I started with a green mat exactly like yours, but just got a nice silicone one with tray spaces, it feels so cool, and it don't curl on the edges like the green ones do. Thanks man.
FireguyNtx of you find that mat you use drop a link here!
www.amazon.com/gp/product/B075M7PQZX/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
Very nice video! First thing I usually look at is the 100K resistors and the header pin connector solder joints when missing any digits or strobing or no digits at all. I have one display somewhere in a box of those that made the driver board blow smoke rings on th HV section. Shorted display tube? What about when all the digits, in self test, count wrong? Is that the 14543 chip? I haven't looked at your other videos yet.
Brilliant video thanks a lot. I see you were working on a silverball mania machine, that's what I have. Im not as knowledgeable as you and have built the machine up with a lot of luck and parts scavenging. I have power to it after fixing the board and some flippers work, no sound yet and the number displays don't have numbers just some dots.
I'm trying to get a soundboard atm any ideas where?
Any help would be most appreciated.
Kind regards Keevor
What transistors should I have on hand?
what would the problem be if just the second digit was out on all four scores? Thanks.
I just had this problem and the digit was out because of a problem with the top left connector on the mpu board. Repinning and rebuilding that connector solved the display problem.
my Kiss pin scores just stopped working for no reason.. and this video is super informative but all my stuff looks fine.