I want all my saw advice to come from a guy with 9 fingers. He obviously has some experience with saws and how they operate. Edit one year later- I cut the living shit out my hand at work on a miter saw. I literally cut my thumb halfway off. So do what you will with that information.
I would normally be warry of taking tool tip type life hacks from some one missing a finger but this looks REALLY cool and potentially useful. Thanks for sharing it :)
Genial amigo, muchas gracias por compartir tu sabiduría y tu trucos para este trabajo, no tenes una idea cuanto hace buscaba un video asi que sirva para fabricar tarugos...Felicitaciones!!!
A lot of videos that show supposedly better ways of doing something are usually the same as far as time taken, and results generated. Some of them are a total waste of time, and are not always the safest to perform. Having spent years doing residential renovations you learn to make a lot of your own tools, and come up with some incredible techniques. Rarely are any brilliant, but this one definitely hits the mark, especially if you don't have time to go to a store, or else they're closed. This I will definitely put to good use. Thanks for posting this.
Yeah, all you have to have is pieces of wood that will fit through the holes, clamps, a drill with drill bits, and wood to drill the hole in. Seems like just buying dowels is a more brilliant idea and less waste of time.
@@ceedogg4270 having spent decades doing all types of renovations and having to McGiver things that you can't purchase. I found that I can use this technique to make specific dowel diameters not available on the shelf. And being able to make a dowel that requires a different diameter on each end. This is easy to build, I use my table saw for cutting the recesses for the jigsaw blades, much quicker.
@@ceedogg4270 Unless you have at your disposal all of the relevant components. I can definitely say if i need dowel on the job in the future the time saved by not having to drive to the store will definitely eclipse the effort required to do this on the job. On top of that the option as stated above to create a specific custom diameter is also invaluable in certain situations. This was a very useful video for me.
Cool idea if you're in a pinch & can't go to the store👍🏼...but it's also much easier & practical to just buy the right sized dowel...by the time you set this up, your time will cost more than the dowels you make.
This is the first of the "brilliant trick" videos I have watched that actually is a brilliant idea. Make all the dowels you want. Ingenious. Congratulations.
It's a creative idea, but really only useful if you want to make a non standard dowel. If you don't have any particular need for a special size or material dowel, then the cost of the material you're using to make dowels is going to be multiple times more than simply buying them.
Realmente muito interessante. Vou nao so aproveitar as serras quebradas mas tambem me tornar independente ao produzir o que me for necessario! Parabens peka ideia!
Esta bien pensado pero a la larga No sirve. El acabado es áspero, no liso y la fricción del rozamiento entre el soporte y el listón redondeado acaba desgastando la base e incluso puede quemarse u arder. Una vase de metal con orificios es más fácil de hacer y duradera.
La verdad sr nunca comento los videos pero de éste no puedo dejar de destacar su sencillez y eficacia. Muchas gracias por compartir sus conocimientos 👏👏👏
Great idea, one thought I had was if it would work better/easier if you flip one of the saw blades around so the teeth are pointing the direction the wood is coming from. As the blades cut as they pull normally no both directions
@@Baetzibaer I've seen a lot of things in my life and I've done a lot of things in my life. My father was a master carpenter, However, I never saw him do anything like that? As you can see by my photo I'm a guitarist... I've seen a lot of guitarists do things that I couldn't even dream of doing, let alone attempt to do. However there's a whole lot of things in my life that I haven't seen or done. I've never jumped out of a plane with a parachute, however I have hang glided. I have motorcycled from Glendale, Arizona to Mount Vernon, Ohio on a 400 Suzuki one banger back in the '80s packing a piece on my hip for protection from two-legged and four-legged varmints looking for trouble, while I camped along the way.
@@Baetzibaer I'm not drooling over it I just think it's the most unique thing I've ever seen. Like a needle threader and whoever invented that had it going on. Is there anything that you've ever drooled over Klaus- Dieter?
Genial eres brillante , nunca se me habia ocurrido , veo sus videos siempre pero este me dejo con la boca habierta , a mi me encanta la carpinteria , gracias y siga dando esas brillantes ideas
I'm not going to lie I usually pass on these kinds of videos because they are sometimes ridiculous but this is pretty smart and I'm going to use it, I have a bunch of old jigsaw blades and I use dowels all the time repairing guitars and furniture. This is great because you can run the drill index in dowel sizes. Nice job man!
Same here with the pass on most of the foriegn 10 easy simply blahs blahs blahs ideas almost always a waste of time. For example diy lathe the dude actually uses a lathe to make it, this though definently would use but with a couple tweaks/mods I would make it into a table so you wouldn't have to clamp every time also I see the versatility/eco-reuse factor of the spent/broken blades however for the table I mentioned above I would buy a large blade, you like the 12" or 16"ers probably Diablo or Irwin brand and cut into 3 inch pieces.....CHEERS
Vaya. Que. Estupendo.. Tremendo trucaso... Excelente. Quede. Sorprendido... Que. Facil. Y yo que. Hacia para. Tarugos. Y. Los hacia dandole con un formon.. Jejjee. Gracias por. Su. Video hermano muy bueno... Reciba muchas bendiciones
Yea, I like this, gets my wheels spinning for projects that could use this method. Great for people that don't have a lathe and wanna make something happen.
Este hombre Sí que sabes! Por eso lo sigo, muchísimas gracias por compartir esos conocimientos tan importantes para retenerlo y ponerlos en práctica, FELICIDADES POR EL ESPACIO!!
I'm not going to lie I've been doing carpentry for 24 years now And I had never thought of this nor would I have ever thought of this. I'm usually a little bit apprehensive when I hear people say brilliant and a title but this was indeed brilliant
I alway wished I could be a great woodworker. In reality, my wood skills suck…..hahahaha. I have done a few birdhouses and the like, but I would probably screw up making the jig. Glad I learned something from this. Really genius idea. Thank you.
Just something i noticed. The blades you put in were facing the same direction. So when you put a rotation on the wooden dowel, only 1 blade is actually cutting. If you made the blades both face opposite difections(as in the cutting sides towards eachother. Then when you rotate make sure the rod rotates the same direction as the cutting teeth.
Maybe it's too aggressive with both cutting simultaneously, and the other one is more of just a bearing surface to keep things smoother and straighter. Would be interesting to see though.
If opposite directions meaning cutting teeth both always cutting into the wood, you WOOD 😆 not be able to start the dowel as the wood WOOD 😁 chatter and not get started. Therefor, having both blades face the same way, the wood will get a chamfer on one side and then the other blade takes the bite.
That's a good observation. I really liked the concept of the jig. The general concept is quite smart. Improvements are a trial and error. Kudos to the presenter, and to the innovator.
This is probably one of the tricks I have never see before and I have learned a lot of them from many years doing woodwork. It surely will be one that I will use in the future and I don't have to have any broken blades to try it out.
Cada día aprendemos más cosas de estos grandes maestros que le despiertan la mente a todo el mundo, felicitaciones Gran amigo y gracias y que Dios te lo multipliquen en bendiciones.
I thought this was a waste of my time bc it took forever to get to the good part. Well it definitely wasn't a waste of my time. I'll be doing this for sure. What a brilliant idea. Nice video.
Estimado amigo, gracias por compartir este tan pequeño pero impresionante detalle. Dios bendiga grandemente tu vida y la de tus amados. Saludos desde Talcahuano Chile.
I just declared myself a rating of the coolest tips that I have learned in life. Yes, LIFE I may not be the sharpest chisel, but I have seen & forgotten a million different ideas, BUT NONE QUITE LIKE THIS ONE! Usually, when I need a large dowel, I will rip an octagon shape on the table saw & go from there. BUT, this extraordinary technique of making small dowels has topped my LifeTime LIST OF “Why didn’t u show me this 20yrs ago?” 👍 GREAT VIDEO Thanks4sharing
A guy with 9 fingers = someone who without a doubt follows every possible safety protocol, and makes sure anyone he teaches does the same. 👍 Also, holy shit thats genius
you should turn the blades opposite ways so that it cuts in both directions, otherwise only one blade is cutting. I was skeptical but this is actually interesting....
I want all my saw advice to come from a guy with 9 fingers. He obviously has some experience with saws and how they operate.
Edit one year later- I cut the living shit out my hand at work on a miter saw. I literally cut my thumb halfway off. So do what you will with that information.
You know the tenth one is always in the way . .
For sure. The next time I need a dowel will be the first. But should that day ever come, the first thing I’m going to do is John Wick my finger off.
Well if he has 9 at least you know he learned the first time
HE KNOWS EXACTLY WHAT NOT TO DO HEHE.
I count 2 thumbs, 7 fingers
Fantastica herramienta!! Felicitaciones y muchos saludos desde Viena, Austria.
As a carpenter I can honestly say I have never seen this before, brilliant genius idea 💡
the chisel edge on hole is more common...
czcams.com/video/e_S93_VMK4Q/video.html
Because it would cost more to have you make this than to just buy it. Great to know but it’s not gonna get much commercial use.
@@tripledvideos6815 just pUMP czcams.com/video/e_S93_VMK4Q/video.html
@@fitnessfrank83 you’re damn straight I went and watched this. 😆
I would normally be warry of taking tool tip type life hacks from some one missing a finger but this looks REALLY cool and potentially useful. Thanks for sharing it :)
Yeah, nubby nailed this one!
😂😂😂😂😂
weary*
You should normally PuMp
czcams.com/video/e_S93_VMK4Q/video.html
@@KS4RonPaul wary*
Genial amigo, muchas gracias por compartir tu sabiduría y tu trucos para este trabajo, no tenes una idea cuanto hace buscaba un video asi que sirva para fabricar tarugos...Felicitaciones!!!
A lot of videos that show supposedly better ways of doing something are usually the same as far as time taken, and results generated. Some of them are a total waste of time, and are not always the safest to perform. Having spent years doing residential renovations you learn to make a lot of your own tools, and come up with some incredible techniques. Rarely are any brilliant, but this one definitely hits the mark, especially if you don't have time to go to a store, or else they're closed. This I will definitely put to good use. Thanks for posting this.
Yeah, all you have to have is pieces of wood that will fit through the holes, clamps, a drill with drill bits, and wood to drill the hole in. Seems like just buying dowels is a more brilliant idea and less waste of time.
@@ceedogg4270 having spent decades doing all types of renovations and having to McGiver things that you can't purchase. I found that I can use this technique to make specific dowel diameters not available on the shelf. And being able to make a dowel that requires a different diameter on each end. This is easy to build, I use my table saw for cutting the recesses for the jigsaw blades, much quicker.
@@pauldavidson4977 Nought you can't achieve without this whole claptrap ... 😟
@@ceedogg4270 Unless you have at your disposal all of the relevant components. I can definitely say if i need dowel on the job in the future the time saved by not having to drive to the store will definitely eclipse the effort required to do this on the job. On top of that the option as stated above to create a specific custom diameter is also invaluable in certain situations. This was a very useful video for me.
I agree would be much easier and less time wasted to head to good ol Bunnings
Was expecting this to be another “let’s make something because I can” This was awesome and very useful. Thanks for the video sir.
@K Den you can turn a scrap of wood into dowels, it's a good skill
Cool idea if you're in a pinch & can't go to the store👍🏼...but it's also much easier & practical to just buy the right sized dowel...by the time you set this up, your time will cost more than the dowels you make.
No se como no trabaja para la NASA. Magnifico. Mis respetos para usted. Es increíble la genialidad que tiene.
I would have never thought of that, very clever, and I actually found it entertaining to watch. thank you 😁
Grande idéia, muito bom, parabéns.
That is so awesome!!!!!! I've been a wood craftsman for 40 years and I NEVER seen this method, thank you so very much!
Can you still count to ten on fingers?
Primera vez que siento que valió la pena, mis más grandes respeto por semejante idea. Gracias por compartirla.Dios lo bendiga.
¿Ya viste que le falta un dedo?
Gracias por el tip.
Saludos desde Pachuca Hidalgo México 👍👍👍👍
This is the first of the "brilliant trick" videos I have watched that actually is a brilliant idea. Make all the dowels you want. Ingenious. Congratulations.
Agreed!
And it only took until the fifth reply to read something positive!
Thank you.
Dowels are cheap. Not worth the time for this non sense.
@@lwh7301 its not about the prize of the dowels, its about the idea that's worth more than your cheap brain.
Excellent --- I have needed non-standard pieces of dowel and had 'no idea' how to do it other than carving, with the results not being very accurate !
It's a creative idea, but really only useful if you want to make a non standard dowel. If you don't have any particular need for a special size or material dowel, then the cost of the material you're using to make dowels is going to be multiple times more than simply buying them.
Realmente muito interessante. Vou nao so aproveitar as serras quebradas mas tambem me tornar independente ao produzir o que me for necessario!
Parabens peka ideia!
Esta bien pensado pero a la larga No sirve. El acabado es áspero, no liso y la fricción del rozamiento entre el soporte y el listón redondeado acaba desgastando la base e incluso puede quemarse u arder. Una vase de metal con orificios es más fácil de hacer y duradera.
simple, rapido, directo....practico muchas gracias muy bueno, thank you
👏👏 muito bom, excelente ideia 😃
Exceldnte la idea lo felicito lo pondrre en practica inmediatamente
Simple, reciclando y práctico. Solución para los tacos y clavos de madera.
Genial, muchas gracias.
Cuáles tacos yo no mire ningunos tacos ni de asada ni al pastor 😂😃😋😂 y etc
Buenísimo.
@@elgranhorri9486 los de asada o al pastor 😂😂😂
@@carlospadilla6965 🙏😨
@@elgranhorri9486 jajaja 🤣😂 ok ya ya pues
Parabéns! Melhor tutorial de cavilhas que já vi!
Genial, no lo conocía. Suelo hacer juguetes de madera y esto me viene de maravillas . Muchas gracias!!!
Wow, I never thought of the out come great job.
La verdad sr nunca comento los videos pero de éste no puedo dejar de destacar su sencillez y eficacia.
Muchas gracias por compartir sus conocimientos 👏👏👏
MUY PRACTICO IDEA GENIAL. FELICITACIONES 👏
Impresionante te felicito por enseñar todo esto.Gracias
Que bien, impresionante invento y solución a un problema común en la carpintería.
If you need a dowel that is made out of an exotic wood to match the wood on your project this would be great.
That would be the only thing that would make it desirable.
that's where the finger went
@@earnieeveridge I dont know about your country but dowel prices in New Zealand make this a great idea.
They make this thing called Wood Stain, Way cheaper the a 1”X 1” cut of Perpel
Purple Heart wood
Great idea, one thought I had was if it would work better/easier if you flip one of the saw blades around so the teeth are pointing the direction the wood is coming from. As the blades cut as they pull normally no both directions
this is what I was looking for.
Let’s us know how it works out
That was the most ingenious thing I've ever seen done!
People have such brilliant minds and you're one of them!
My, you can't have Seen much in your Life so far ... -- poor thing 😟
@@Baetzibaer
I've seen a lot of things in my life and I've done a lot of things in my life.
My father was a master carpenter, However, I never saw him do anything like that?
As you can see by my photo I'm a guitarist... I've seen a lot of guitarists do things that I couldn't even dream of doing, let alone attempt to do.
However there's a whole lot of things in my life that I haven't seen or done. I've never jumped out of a plane with a parachute, however I have hang glided.
I have motorcycled from Glendale, Arizona to Mount Vernon, Ohio on a 400 Suzuki one banger back in the '80s packing a piece on my hip for protection from two-legged and four-legged varmints looking for trouble, while I camped along the way.
@@rebeccasilveous8898 So, what makes you drool over such a non-entity?
@@Baetzibaer
I'm not drooling over it I just think it's the most unique thing I've ever seen.
Like a needle threader and whoever invented that had it going on.
Is there anything that you've ever drooled over Klaus- Dieter?
Wooooowww acaba de revolucionarme la historia del tarugo de madera. Que buena idea. Muchas gracias por compartirla
Que buena idea Dios lo bendiga por compartir
No es más fácil con una terraja?
@@adrianmartinez1438 y no... te queda rayada con esta queda liso
Podes fabricar los palos para bateros le pones la marca y venderlos como original..
Realmente genial, es increíble lo que se puede hacer con lo que se tiene y ni siquiera te lo imaginas.
Wow. I had NO IDEA where you were going with this. What a great idea/hack!! 👌🏼
Fascinante seus inventos Sr.🤗
Mas que ingenioso y excelente idea, felicitaciones amigo.
Y muchas gracias por compartirlo.
Saludos desde Mendoza Argentina.
acabo de terminar el mio, funciona genial! gracias, maestro por la enseñanza!
Me he quedado sin palabras. impresionante tu talento, eres el puto amo. GRACIAS ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
When I finally saw what he was doing, my jaw dropped. That's amazing.
Boa idéia! Aprendi agora! Obrigada por compartilhar!👏🏻👏🏻😘💫✨
çok güzel yazıyorsun ama eden ingilizce yazıyorsun
Gracias ,colega porla idea ..feliz día del carpintero !!!!!
I am certainly going to use this! Thank you very much for the shared genius!
Ya sure you are. I'm a just gonna skip down to Home Depot and buy me a couple of them der dowel rods
That's a handy dowel jig. Learned something new. Thank you.
Woow me surpreendeu meus parabéns 👏
Genial eres brillante , nunca se me habia ocurrido , veo sus videos siempre pero este me dejo con la boca habierta , a mi me encanta la carpinteria , gracias y siga dando esas brillantes ideas
Excelente eres Genial recibe un fuerte abrazo desde Oaxaca lo Compartiré
That is the most ingenious way I’ve ever seen to make dowels. Bravo good sir!
I'm not going to lie I usually pass on these kinds of videos because they are sometimes ridiculous but this is pretty smart and I'm going to use it, I have a bunch of old jigsaw blades and I use dowels all the time repairing guitars and furniture. This is great because you can run the drill index in dowel sizes. Nice job man!
Same here with the pass on most of the foriegn 10 easy simply blahs blahs blahs ideas almost always a waste of time. For example diy lathe the dude actually uses a lathe to make it, this though definently would use but with a couple tweaks/mods I would make it into a table so you wouldn't have to clamp every time also I see the versatility/eco-reuse factor of the spent/broken blades however for the table I mentioned above I would buy a large blade, you like the 12" or 16"ers probably Diablo or Irwin brand and cut into 3 inch pieces.....CHEERS
How do you use dowels in repairing guitars? Just curious cus I was going to make one but was not thinking about possibly needing dowels
I too enjoyed this, but I would think it would make more sense to turn one of the blades the opposite direction so the teeth would cut on both sides.
@@Ian-tp6mu Cigar box guitars are kind of fun to make.
Or you could run down to the hardware store and pick up a selection of dowels??? Just a thought.
Parabéns pelo trabalho . Muito ,muito importante
Vaya. Que. Estupendo.. Tremendo trucaso... Excelente. Quede. Sorprendido... Que. Facil. Y yo que. Hacia para. Tarugos. Y. Los hacia dandole con un formon.. Jejjee. Gracias por. Su. Video hermano muy bueno... Reciba muchas bendiciones
Excelente parabéns, realmente não conhecia.
Muy ingenioso este señor...por mas.sencillo que sea vea es muy grandioso.
Y demasiado penesitoso
De hecho ya le falta un índice oh
43 years I've been a joiner and I've just learnt something new! Excellent video well done 👏
4 years wood shop in high school never seen that
A joiner ? What
I was wondering where you were going with this. A dowel rod maker ! Awesome and useful ! Great idea !
Yea, I like this, gets my wheels spinning for projects that could use this method.
Great for people that don't have a lathe and wanna make something happen.
Uau sensacional muito boa sua Ideia Adorei nossa maguinifico Parabéns Deus o Abençoe muito 👏👏👏👏👏👏👏
Serendipia, que maravilla encontrar esto viendo cosas random. Me preguntaba cómo hacer tarugos y aquí aparece. Mil gracias
O
Te está viendo y escuchando internet
@@claudiavenencia1337 jajajajaja
No es mas facil comprarlos?
Brilliant. I really like that you can make a dowel of any size this way. Sweet! Thanks for sharing.
WOW! Great idea as to how to make custom dowels! Love it. 👍👍
One thing I think I would change is to turn one of the jig saw blades the opposite direction.
I came here looking for this comment.
look a little bit harder at the video
Este hombre Sí que sabes! Por eso lo sigo, muchísimas gracias por compartir esos conocimientos tan importantes para retenerlo y ponerlos en práctica, FELICIDADES POR EL ESPACIO!!
Damn! I have been working with wood since 1972 when I got of the Marine's and this is the slickest thing I have ever seen. Brilliant!
Amazing,, ya learn something new every day... THANK YOU
I'm not going to lie I've been doing carpentry for 24 years now And I had never thought of this nor would I have ever thought of this. I'm usually a little bit apprehensive when I hear people say brilliant and a title but this was indeed brilliant
28 years for me. I agree 100%.
Great Idea! Initially I think you are making a string musical instrument but then I surprised! That's very interesting. Good Luck!
I like the idea of clamping a block to run the saw against. I had not thought of that.
Sencillamente... brillante...!!!👍👏👏👏👏👏
Man that’s so cool! I had no idea what you were making at first. Thanks for the idea!
My wife came in the room while I was watching this and told me I shouldn't take wood working lessons from someone with nine fingers. She has a point.
Holy crap! I DID NOT even notice that! 😂 I had to go back and watch it again to see what you were talking about!
Seems he's missing a point too 👉
Frodo
lmfao, leave it to a women to notice that. Rumor has it, he turned one of the dowels into an actual finger saw....next episode!
She has a pointer finger
I alway wished I could be a great woodworker. In reality, my wood skills suck…..hahahaha. I have done a few birdhouses and the like, but I would probably screw up making the jig. Glad I learned something from this. Really genius idea. Thank you.
Espectacular! Me encantó!
Just something i noticed. The blades you put in were facing the same direction. So when you put a rotation on the wooden dowel, only 1 blade is actually cutting. If you made the blades both face opposite difections(as in the cutting sides towards eachother. Then when you rotate make sure the rod rotates the same direction as the cutting teeth.
Maybe it's too aggressive with both cutting simultaneously, and the other one is more of just a bearing surface to keep things smoother and straighter. Would be interesting to see though.
If opposite directions meaning cutting teeth both always cutting into the wood, you WOOD 😆 not be able to start the dowel as the wood WOOD 😁 chatter and not get started. Therefor, having both blades face the same way, the wood will get a chamfer on one side and then the other blade takes the bite.
Well don't just comment try it yourself and see the results
@@lisab3396 :or it was an oversight, and the 2nd blade is unnecessary. lol....
(many dowel jigs only have one cutting edge.)
That's a good observation. I really liked the concept of the jig. The general concept is quite smart. Improvements are a trial and error. Kudos to the presenter, and to the innovator.
This is probably one of the tricks I have never see before and I have learned a lot of them from many years doing woodwork. It surely will be one that I will use in the future and I don't have to have any broken blades to try it out.
Tenca aqusta publicacio
Two working blades is good too.
Not need to be broken
Don't call him Shirley.
Wow, wasnt sure where this was going at first. Something I haven't seen before! Brilliant!
Muy buena idea!! Gracias
Cada día aprendemos más cosas de estos grandes maestros que le despiertan la mente a todo el mundo, felicitaciones Gran amigo y gracias y que Dios te lo multipliquen en bendiciones.
I love it. I never throw my Bosch jigsaw blades. Now I can make a dowel rod jig. Thanks!
I have yards of old bandsaw blades that can be reused in ways like this. I’ll get around to it. ……one of these days….
Anything you can recycle inc wood has got to be good! Nice one.
I thought this was a waste of my time bc it took forever to get to the good part. Well it definitely wasn't a waste of my time. I'll be doing this for sure. What a brilliant idea. Nice video.
Super felicitaciones,se nota la experiencia no se improvisa, un saludo desde Colombia 🇨🇴
Estimado amigo, gracias por compartir este tan pequeño pero impresionante detalle. Dios bendiga grandemente tu vida y la de tus amados. Saludos desde Talcahuano Chile.
The pic was misleading. You showed the jigsaw blades mounted in the drill
Wow, increíble, muchas gracias por este video
This ain't woodworking. It's magic😁👍 super nice idea.
Me vendría muy bien esto!!! Ya debo ponerlo en práctica!!!
One of the coolest tricks I’ve ever seen thank you man this was a great video learned something new today ☘️🤘🇺🇸⚡️⚡️
I just declared myself a rating of the coolest tips that I have learned in life. Yes, LIFE I may not be the sharpest chisel, but I have seen & forgotten a million different ideas, BUT NONE QUITE LIKE THIS ONE! Usually, when I need a large dowel, I will rip an octagon shape on the table saw & go from there. BUT, this extraordinary technique of making small dowels has topped my LifeTime LIST OF “Why didn’t u show me this 20yrs ago?” 👍 GREAT VIDEO Thanks4sharing
Guy with all his fingers: uses tools as designed.
Guy missing finger: let's find weird ways to combine power tools and see what happens.
😩🤣🤣
I was waiting for this comment.
😂😂😂😂😂😂
I was thinking the exact same. Just buy a dowel maker if you use them all the time. It's a tool that will last forever.
@@1bcordell what if you live in a country that has a limited tool supply, then What?
A guy with 9 fingers = someone who without a doubt follows every possible safety protocol, and makes sure anyone he teaches does the same. 👍 Also, holy shit thats genius
Correction!!!!!!
7 fingers, 2 thumbs!!!!👍👍
Maybe he owed someone money and his missing finger had nothing to do with workplace safety!! Just saying people assume a lot of things!!
Wow, glad I watched this. Great idea 💡
Increíble 🎉, Saludos desde Chile 🇨🇱
Good inspiration, sukses for you
Very handy if you need an odd sized dowel. I used to just turn them on a metal lathe when I had access to a lathe.
Material cost in making this handy gadget: ZERO
Cost of metal lathe: 3 thousand dollars.
Una idea sencilla y espectacular!
That was awesome even though I don't do much wood working. Very cool
I'm waiting for the next video when he drills out the center of his dowel and pushes in a pencil lead.
-Jib Jab it with Graphene, the magic in the fau see ouchi ;{
The saw blades should be oriented opposite each other to match the direction of the spinning dowel
Nobody asked for your unsolicited advice
the blades should be in the trash and the person should be at the store buying dowels
@@huckwild6464 why spend money if you don't have to. Nothing wrong with recycling what you have.
Maybe it worked better this way. Maybe they bit the wood too much like that and this somehow solves it.
@@hexdude24 a lumberjacks child starved because of this comment
you should turn the blades opposite ways so that it cuts in both directions, otherwise only one blade is cutting. I was skeptical but this is actually interesting....
That thumbnail got me AGAIN!🤣🤣🤣
I actually learned something, thank you!
Can’t wait until the next time I hear someone say you can’t fit a square peg into a round hole
very clever, great comment
Oh yeah? Just watch me! Good stuff!
Hold my sandpaper.
Si señor 👌🏻 la cabeza tiene que estar para pensar 👌🏻🔥
OK, that's actually pretty cool. Bonus points for not calling it a hack.